Clarification Request
0:37
Analyzing circuit design.
Accessing knowledge base.
Analyzing the schematic.
Defining Q3's function.
Here’s how the Q3 circuit works:
-
Q3 is an N-channel MOSFET (SSM3K15ACTC,L3F)
• Pin 1 Gate (G) on net “DescriptiveNet48” via series resistors R13/R14
• Pin 2 Source (S) tied to GND
• Pin 3 Drain (D) on “Net 50” -
Net 50 fans out to R15, R16, R17, which are the current-limit resistors for the red, green, and blue LEDs of LED1.
-
With gate driven high by the MCU (through R13/R14), Q3 conducts, sinking LED currents to ground and turning LEDs on. When the gate is low or floating, Q3 is off, isolating the LEDs.
-
A pull-down (R13/R14) on the gate follows best practice: ensure Q3’s gate never floats, so the MOSFET reliably stays off when the MCU pin is tri-stated.
Show me Q3 context
Explain Net 50 load
Check MOSFET suitability
Gate resistor/pulldown values
56 days
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.