Project Document UID Inquiry
1:23
Project
Help
Addressing missing documentUid.
Using help tools effectively.
Checking knowledge base relevance.
Planning tool usage for UID retrieval.
Using Knowledge Base Tool.
Reading docs about How do I find a projects unique ID or document UID in Flux? Is it visible in the project URL, share dialog, or project settings? Provide exact navigation steps..
Reading docs about Where can I find a projects unique identifier or ID in Flux? Is there a document UID exposed in the editor or in the project URL? Provide exact instructions if available..
Reading docs about Does Flux expose a project ID or document UID? Where in the UI can I see or copy it? If not available, do the docs state that only the project URL changes with the name?.
Planning UID retrieval approach.
Short answer: I can’t see a documentUid for this project from here, and I couldn’t find any Flux documentation that exposes a user-visible “document UID” or instructions to retrieve it. This likely means it isn’t available in the Flux UI.
If you’re aiming to reference the project, you may need to use the project URL instead. If you want, tell me your use case and I’ll suggest the best supported approach.
- Flux Documentation: https://docs.flux.ai/Introduction/the-flux-method
- Documentation Search Results: https://docs.flux.ai/?s=document%20UID
- Flux User Community: https://www.flux.ai/p/slack-community
Ask where to find ID
Clarify use case: API
Use share link
Check URL behavior
Ask about export metadata
32 days
Ready.
U1 - C1 P2
U1 ISET - R1 P1
U1 - C1 P2
GND
U1 ISET - R1 P1
U1 - C1 P2
GND
U1 VIN - C1 P1
U1 - C1 P2
U1 FB - C2 P1
U1 VIN - C1 P1
U1 FB - C2 P1
R1
Resistance
3.6kΩ
C2
Capacitance
4.7uF
C1
Capacitance
22uF
U2
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #genericsjharwinbarrozo15.4k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
Inspect
Battery Charger V0.1
Controls
Properties
U1_Specifications
Function: Single-cell Li-ion linear charger IC for USB/adapter input with precharge, constant-current/constant-voltage algorithm, and charge status indication. Electrical limits: VIN operating range per datasheet (USB/adapter input), VBAT regulation voltage and allowable battery range per datasheet, programmable fast charge current via ISET (observe absolute max and thermal derating), integrated thermal regulation and thermal shutdown (junction temperature limits per datasheet). Required passives: Input bypass capacitor from VIN to GND, output/battery capacitor from BAT to GND as recommended, ISET resistor from ISET to GND to set fast charge current, optional NTC thermistor network on TEMP, feedback network on FB (if used per datasheet application), pull-up resistors and indicator LEDs or logic loads on ~DONE and ~CHARG as required. Pin functions: TEMP (Pin 1) – Battery temperature sense / NTC input; ISET (Pin 2) – Charge current program pin; GND (Pin 3) – Ground reference; VIN (Pin 4) – Input supply from USB/adapter; BAT (Pin 5) – Battery connection / charge output; ~DONE (Pin 6) – Charge complete status output (active low); ~CHARG (Pin 7) – Charging status output (active low); FB (Pin 8) – Feedback pin (used per datasheet for regulation/compensation as applicable); PAD (Pin 9, exposed pad) – Thermal pad, connect to GND plane per layout guidelines. Package: SOP-8-EP (8-pin SOP with exposed thermal pad).
U1_Candidate_MPNs
- CN3065 (Consonance) — Preliminary availability: listed in vendor/distributor references; Lifecycle status: appears active (verify with DigiKey/Mouser); Preliminary pinout compatibility: TEMP, ISET, GND, VIN, BAT, CHRG/STAT, FB present in SOP-8 family (likely close to CN3063 pin functions) — datasheet verification required.
- CN3082 (Consonance) — Preliminary availability: documented in Consonance family literature; Lifecycle status: appears active; Preliminary pinout compatibility: TEMP, ISET, GND, VIN, BAT, STAT/CHRG, FB in SOP-8-style package (verify exact pin ordering against CN3063).
- FP8102 (Feeling / Advanced Analog Technology or equivalent) — Preliminary availability: referenced on distributor/product pages; Lifecycle status: appears active; Preliminary pinout compatibility: single-cell linear Li-ion charger in SOP-8/MSOP-8 with exposed pad, programmable ISET, TEMP, status outputs and FB (datasheet check needed for exact pin mapping).
Notes: Each candidate above meets the functional requirements at a high level (single-cell linear Li-ion charger, programmable ISET, TEMP input, status outputs, FB, SOP-8/EP package). All entries are preliminary — datasheet review is required to confirm VIN/VBAT limits, ISET programming range/absolute max, thermal regulation/shutdown behavior, exact pin ordering for drop-in compatibility, and current sourcing/availability and formal lifecycle status (active, legacy, obsolete) from primary distributors.
Part Type
Integrated Circuit
Package or Case Code
8-SOP
Integrated Circuit Type
Power Management
U1_Replacement_Candidates
- U2: CN3065 (Consonance) — Availability: listed in vendor/distributor references; Lifecycle status: appears active; Pinout Compatibility: TEMP, ISET, GND, VIN, BAT, ~DONE, ~CHARG, FB functions present in SOP-8-EP with likely matching pin order.
- U3: CN3082 (Consonance) — Availability: documented in Consonance family literature; Lifecycle status: appears active; Pinout Compatibility: TEMP, ISET, GND, VIN, BAT, STAT/~CHARG, FB in SOP-8-EP; datasheet check needed for exact pin mapping.
- U4: FP8102 (Feeling/Advanced Analog Technology) — Availability: referenced on distributor/product pages; Lifecycle status: appears active; Pinout Compatibility: single-cell linear Li-ion charger in SOP-8-EP with TEMP, ISET, GND, VIN, BAT, status outputs, and FB; verify precise pin arrangement.
Mount
Surface Mount
Designator Prefix
U
Availability & Pricing
| Distributor | Qty 1 | |
|---|---|---|
| LCSC | $1.37 | |
Assets
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.