Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part

Write a part description

Describe each pin

Operating conditions

Electrical max ratings

Part Specifications

Application circuits

Verify Part Details

Recommend similar parts

Check availability & lifecycle

list all VOUT1 pins in a table format. For each pin provide its pin number, pin ...

louis120913

@copilot list all VOUT1 pins in a table format. For each pin provide its pin number, pin name and function.

copilot

Sure, here is a table summarizing the information for the VOUT1 pins in your project:

Table

Pin Number	Pin Name	Function
18	VOUT1	Passive
19	VOUT1	PowerOut

Let me know if you need more details or if there are any other specific pin functions you would like to know about!

Someone is typing...

create a detailed step by step plan table for this project to verify its functio...

louis120913

@copilot create a detailed step by step plan table for this project to verify its functionality.

copilot

To verify the functionality of your linear voltage regulator circuit, we can break the process down into several detailed steps. Each step will involve specific tasks, measurements, and checks to ensure that everything is working correctly.

Here's a step-by-step plan table to guide you:

Step-by-Step Plan Table

Step	Task	Detailed Actions	Expected Outcome
1	Component Placement	Place the linear voltage regulator IC and associated components on the PCB.	Components are physically placed on the PCB.
2	Initial Visual Inspection	Inspect the PCB for any obvious issues (misaligned parts, solder bridges).	PCB is free of visual defects.
3	Power Input Connection (VIN1)	Connect VIN1 to the input power source. Ensure polarity is correct.	VIN1 is correctly connected to the input power source.
4	Initial Power-Up Test	Power up the circuit and measure input voltage at VIN1.	Measured voltage matches the expected input voltage.
5	Output Voltage Test (VOUT1)	Measure the output voltage at VOUT1.	Output voltage should be within the specified range $1.2V$ to $3.3V$.
6	Output Voltage Test (VOUT2)	Measure the output voltage at VOUT2.	Output voltage should be within the specified range $1.2V$ to $3.3V$.
7	Current Load Test	Apply a load to the output and measure the current.	Regulator maintains stable voltage; current is as expected.
8	Thermal Test	Measure the temperature of the regulator under load.	Temperature remains within safe operating limits.
9	Enable Pin Test (EN1 & EN2)	Toggle EN1 and EN2 pins to verify enable/disable functionality.	Regulator turns on/off correctly with EN pins.
10	Sense Pin Test (VSENS1 & VSENS2)	Verify voltage sense pins are performing correctly.	Voltage at VSENS pins matches expected values.
11	Power Good Test (PG1 & PG2)	Check PG1 and PG2 outputs to ensure power good indicator is working.	PG pins indicate power status correctly.
12	Reset Pin Test (RESET)	Verify functionality of the reset pin.	Device resets correctly when reset pin is toggled.
13	Ground Connection Test (GND)	Verify GND connection integrity.	Ground pin is correctly connected and stable.
14	Pad Connection Test (PAD)	Ensure PAD is correctly connected.	PAD is firmly and correctly connected.
15	No Connect Pin Verification (NC)	Verify that NC pins are not connected to any net.	NC pins are correctly unconnected.
16	Final Full System Test	Conduct a full system test with all pins in use.	Entire system operates correctly under typical conditions.
17	Document Results	Record all measurements and observations.	Detailed test report is created.

This table provides a structured approach to verify the functionality of your voltage regulator circuit. Each step includes clear tasks and expected outcomes to ensure thorough testing.

Would you like additional details on any of the steps or assistance with anything else?

copilot

To test the linear voltage regulator under no load, you'll need to perform specific tasks to ensure that the regulator functions correctly without any external load connected to it. Here's a detailed plan to force the correct test condition on the IC:

Steps to Test the Regulator with No Load

Component Placement and Soldering
- Ensure that all components are placed and soldered correctly on the PCB.
Initial Visual Inspection
- Inspect the PCB for any obvious issues such as misaligned parts or solder bridges.
Connect Power Supply to VIN1
- Connect a stable DC power supply to VIN1 and GND.
- Set the input voltage to a suitable value within the regulator's input range (e.g., 5V if your regulator supports it).
Power-Up the Circuit
- Turn on the power supply and verify that the input voltage is correctly supplied to VIN1.
Measure Output Voltage at VOUT1 and VOUT2
- Use a digital multimeter to measure the output voltage at VOUT1:1 and VOUT2:1.
- Record the values. They should be within the specified range of $1.2V$ to $3.3V$.
Check Voltage Sense Pins
- Measure the voltage at VSENS1:1 and VSENS2:1 to ensure they are sensing the correct output voltage.
Enable Pin (EN1 & EN2) State Verification
- Ensure EN1:1 and EN2:1 are properly connected (either pulled high or low depending on active state configuration).
- Confirm the regulator turns on/off correctly with enable pins.
Reset Pin Functionality
- Verify the functionality of the RESET:1 pin by toggling it and ensuring the regulator can reset as expected.
Power Good Pins (PG1 & PG2)
- Check PG1:1 and PG2:1 outputs to ensure that the power good indicator shows the correct status.
Ground Connection Verification
- Ensure GND:1 is correctly connected to the circuit.
Pad Connection Verification
- Check that the PAD:1 is securely connected.
No Connect Pin Verification (NC)
- Confirm that NC pins (NC:1, NC:11, NC:20) are not connected to any other nets.
Document Results
- Record all measurements, observations, and confirm that the outputs are within the expected range without any load.

Verifying the Test Conditions

Make sure the connections are secure and there is no intermittent contact.
Verify that the power supply is set to the correct voltage and can handle the regulator's input requirements.
Ensure there is no load connected to the output pins during this test.

Expected Outcomes

The output voltages at VOUT1:1 and VOUT2:1 should be stable and within the specified range of $1.2V$ to $3.3V$.
The sense pins should reflect the output voltages accurately.
The power good pins should indicate a proper status when the circuit is functioning correctly.
The enable and reset functionalities should work as expected.

By following these steps, you can verify that the regulator functions correctly with no load. Would you like any specific details or further assistance with another part of the project?

louis120913

The regulatior function test with no load. How should I force the correct test condition on the IC test?

Someone is typing...

VOUT2

VSENS1

PAD

VIN1

VSENS2

GND

RESET

PG1

VOUT1

EN2

VOUT1

VOUT2

VIN2

VIN1

EN1

PG2

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M