Part Data Review and Validation

Thought for 2 mins 25 sec

I completed the review for TPS274C65ASHRHAR.

Step 1: Part information review Project metadata vs datasheet

Table

Item	In part project	Datasheet scan result	Status
MPN	TPS274C65ASHRHAR	TPS274C65ASHRHAR	Match
Datasheet URL	Present: PDF	Official TI datasheet	Match
Package	Property says TO	RHA, 40-pin VQFN, 6.0 mm x 6.0 mm, 0.5 mm pitch	Mismatch
Pin count	41 schematic terminals including exposed pad	40 pins + exposed pad	Match
Description	"12-V to 36-V 65-mohm four-channel..."	TI describes 72 mOhm quad smart high-side switch	Mismatch
Part type	Electromechanical Components	Power switch IC / smart high-side switch	Mismatch

Step 2: Datasheet property check

A datasheet URL was already set on the part, so no web lookup or property update was needed.

Step 3: Datasheet scan summary Device summary

Table

Field	Value
Function	Quad-channel smart high-side switch with SPI and diagnostics
Supply range	12 V to 36 V nominal operating supply
Logic supply	3.0 V to 5.5 V
On-resistance	72 mOhm typ at 25 C
Package	RHA VQFN-40
Body size	6.0 mm x 6.0 mm
Pitch	0.50 mm
Max height	1.0 mm
Variant features	ASH includes reverse current blocking, LED driver, ADC, current sense

Special features

Table

Feature	Present
SPI interface	Yes
Adjustable current limit	290 mA to 2.45 A for ASH
Reverse current blocking	Yes
LED outputs	4
Integrated ADC	Yes
Current sense	Yes
Thermal shutdown	Yes
Short-to-ground protection	Yes
Wire-break / open-load diagnostics	Yes
Short-to-supply detection	Yes

Absolute maximum ratings

Table

Parameter	Rating
VS continuous	-0.3 V to 40 V
VS transient under 1 ms during ON state	-0.3 V to 60 V
VOUT to GND	-30 V to VS + 0.3 V
VDS	-0.7 V to 39 V
VDD	-0.3 V to 7.0 V
Digital input pins	-0.3 V to 7.0 V
LED output pins	-0.3 V to 7.0 V
REG_EN	-0.3 V to 7.0 V
RCBx	VOUT - 0.7 V to VOUT + 6 V
ISNS	-0.3 V to 7.0 V
FLT	-0.3 V to 7.0 V
Reverse ground current	-50 mA
Junction temperature	150 C max
Storage temperature	-65 C to 150 C

Recommended operating conditions

Table

Parameter	Range
VS nominal supply	12 V to 36 V
VDD	3.0 V to 5.5 V
Digital input pins	-0.3 V to 5.5 V
FLT pin	-0.3 V to 5.5 V
LEDOUT pins	-0.3 V to 5.5 V
REG_EN	-0.3 V to 5.0 V
Operating ambient from orderable info	-40 C to 125 C

Key electrical characteristics

Table

Parameter	Value
On-resistance RON	72 mOhm typ at 25 C, 110 mOhm typ at 125 C
Parallel 2-channel RON	33 mOhm typ at 25 C, 55 mOhm typ at 125 C
Internal VDD regulator output	3.1 V min, 3.3 V typ, 3.6 V max
Internal VDD regulator current limit	25 mA min, 50 mA max
Continuous load current per channel	1.6 A typ with all channels on at 85 C
Continuous load current per channel	2.5 A typ with two channels on at 85 C
VDD quiescent current	1.0 mA typ to 1.3 mA typ depending condition
VS quiescent current	1.4 mA typ to 2.8 mA typ depending condition
Current sense ratio IOUT / ISNS	1160 typ
ADC reference	2.72 V min, 2.8 V typ, 2.85 V max
ADC conversion update time	128 us typ
Thermal shutdown warning	110 C min, 130 C typ, 150 C max
Thermal shutdown	160 C min, 185 C typ, 210 C max

Pin descriptions

Table

Pin(s)	Signal(s)	Datasheet role
1	~READY	Ready/status output
2	~FLT	Open-drain fault output
3	DO_EN	Global output enable input
4	VDD	Logic supply input
5, 21	GND_1, GND_2	Ground
6	ISNS	Analog current-sense output
7	SDO	SPI data output
8	SDI	SPI data input
9	SCLK	SPI clock input
10	~CS	SPI chip select input
11	RCB3	Reverse current blocking gate for channel 3
12, 13	OUT3_1, OUT3_2	Channel 3 output
14-17	VS_1, VS_2, VS_3, VS_4	Main switch supply input
18, 19	OUT4_1, OUT4_2	Channel 4 output
20	RCB4	Reverse current blocking gate for channel 4
22-25	LEDOUT1, LEDOUT2, LEDOUT3, LEDOUT4	LED matrix driver outputs
26, 27	DNC_1, DNC_2	Do not connect
28	DSPI	Daisy-chain SPI mode input
29	REG_EN	Internal regulator enable
30	ADDCFG	SPI address configuration
31	RCB2	Reverse current blocking gate for channel 2
32, 33	OUT2_1, OUT2_2	Channel 2 output
34-37	VS_5, VS_6, VS_7, VS_8	Main switch supply input
38, 39	OUT1_1, OUT1_2	Channel 1 output
40	RCB1	Reverse current blocking gate for channel 1
EP	EP	Exposed pad, connect to IC ground

Package dimensions

Table

Parameter	Datasheet value
Package code	RHA0040M
Package type	VQFN-40
Body size A x B	5.9 mm to 6.1 mm square
Exposed pad D2 x E2	4.15 mm +/- 0.1 mm
Lead pitch e	0.50 mm
Terminal width b	0.20 mm to 0.30 mm
Terminal length L	0.30 mm to 0.50 mm
Height A	0.8 mm to 1.0 mm
TI example land pattern terminal size	40x 0.25 mm x 0.6 mm
TI example exposed pad land	4.15 mm square

Step 4: Symbol and footprint cross-check Cross-check result

Table

Check	Result	Risk
Pin count	41 terminals in project = 40 pins + exposed pad	OK
Pin numbering	Matches datasheet numbering including EP as 41	OK
Pin names	AS/ASH pin names align with datasheet	OK
DNC pins	DNC_1 and DNC_2 present	OK
Footprint package family	Footprint filename indicates QFN50P600X600X100-41N-D, consistent with 0.5 mm pitch, 6x6 mm, 1.0 mm height, 41 terminals incl. EP	OK
Exposed pad present	EP and pad 41 exist	OK
Metadata package property	Project says TO instead of RHA / VQFN-40	Ordering/library risk
Metadata part type	Project says Electromechanical Components	Library/search/BOM risk
Description value	Project says 65-mohm, datasheet says 72 mOhm typ	Specification risk
Symbol pin electrical types	All terminals are marked Unspecified in the symbol	ERC/usability risk
Footprint peripheral pad length	Footprint uses 0.25 mm x 0.85 mm pads, TI example land pattern shows 0.25 mm x 0.6 mm	Manufacturing risk
Exposed pad size	Footprint EP is 4.25 mm square, TI example land is 4.15 mm	Minor assembly review item

Issues that should be fixed

Table

Priority	Issue	Why it matters
High	Peripheral pads appear 0.85 mm long instead of TI's 0.6 mm recommendation	On a 0.5 mm pitch VQFN, longer pads can increase solder bridging and skew assembly yield
High	Package property is TO	Can cause wrong package identification and wrong ordering assumptions
Medium	Description says 65-mohm instead of 72 mOhm typ	Can mislead selection and review
Medium	Part type is incorrect	Can affect organization, filtering, and part reuse
Medium	All symbol pins are Unspecified rather than input/output/power/ground	Can weaken ERC quality and make the part harder to use safely
Low	Exposed pad land is 4.25 mm vs TI example 4.15 mm	Usually not fatal, but worth reviewing with stencil/paste strategy

Bottom line

The pin map is good and matches the ASH datasheet.
The footprint family is broadly correct for a 6 mm x 6 mm, 0.5 mm pitch VQFN-40 with EP.
The biggest concern is the outer pad length mismatch versus TI's recommended land pattern.
The project metadata also has clear package/type/spec mismatches that should be corrected before reuse or release.

If you want, I can next give you a precise fix list for the part project fields and footprint dimensions.

Fix list next

Check pin types

Review DRC risks

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.7k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k
Push Button
A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
jharwinbarrozo
490.7k
T491D226K025AT
22 µF Molded Tantalum Capacitors 25 V 2917 (7343 Metric) 800mOhm #Capacitors #Tantalum #22uF #part
vasyl
448.3k