Part Datasheet Review and Verification

Thought for 4 mins 12 sec

flux

Here is a complete, step-by-step execution for the part project for SN74HC08NG4.

Step 1 — Review available part information

MPN: SN74HC08NG4
Manufacturer: Texas Instruments
Part type: Integrated Circuits
Description: IC GATE AND 4CH 2-INP 14DIP
Datasheet: Datasheet
Schematic pin count: 14 pins present as terminals:
- Left group: 1A, 1B, 1Y, 2A, 2B, 2Y, GND
- Right group: 3Y, 3A, 3B, 4Y, 4A, 4B, VCC
Footprint presence: Yes — a PDIP-14 footprint is defined at a587f68f-0884-4147-98b1-d2b5e63258ea.defaultFootprint using the asset “DIP794W53P254L1930H508Q14N.kicad_mod” with an included 3D model “SN74HC08NG4.stp”.

Step 2 — Datasheet URL check and set

A datasheet URL is already set on this part: Datasheet. No change needed.

Step 3 — Datasheet scan and metadata extraction Key features (per Datasheet)

Buffered inputs
Wide operating voltage range: 2 V to 6 V
Wide operating temperature range: –40°C to +85°C
Supports fanout up to 10 LSTTL loads
Significant power reduction compared to LSTTL logic ICs

Absolute Maximum Ratings

Table

Parameter	Min	Max	Unit	Notes
VCC (Supply voltage)	-0.5	7	V
IIK (Input clamp current)		±20	mA	VI VCC
IOK (Output clamp current)		±20	mA	VO < 0
IO (Continuous output current)		±25	mA	VO = 0 to VCC
Continuous current (VCC or GND)		±50	mA
TJ (Junction temperature)		150	°C
Tstg (Storage temperature)	-60	150	°C

Recommended Operating Conditions

Table

Parameter	Condition	Min	Typ	Max	Unit
VCC	Supply voltage	2	5	6	V
VIH	VCC = 2 V	1.5			V
VIH	VCC = 4.5 V	3.15			V
VIH	VCC = 6 V	4.2			V
VIL	VCC = 2 V			0.5	V
VIL	VCC = 4.5 V			1.35	V
VIL	VCC = 6 V			1.8	V
VI	Input voltage	0		VCC	V
VO	Output voltage	0		VCC	V
Δt/Δv	VCC = 2 V			1000	ns
Δt/Δv	VCC = 4.5 V			500	ns
Δt/Δv	VCC = 6 V			400	ns
TA (Operating free-air temperature)	SN74HC08	−55		125	°C
TA (Operating free-air temperature)	SN54HC08	−55		125	°C

Note from Datasheet: “All unused inputs of the device must be held at VCC or GND to ensure proper device operation.”

Electrical Characteristics (selected)

Table

Parameter	Condition	VCC	TA	Min	Typ	Max	Unit
VOH	IOH = −20 µA	2	25°C	1.9	1.998		V
VOH	IOH = −20 µA	4.5	25°C	4.4	4.499		V
VOH	IOH = −20 µA	6	25°C	5.9	5.999		V
VOH	IOH = −4 mA	4.5		3.98	4.3		V
VOH	IOH = −5.2 mA	6		5.48	5.8		V
VOL	IOL = 20 µA	2	25°C		0.002	0.1	V
VOL	IOL = 20 µA	4.5	25°C		0.001	0.1	V
VOL	IOL = 20 µA	6	25°C		0.001	0.1	V
VOL	IOL = 4 mA	4.5			0.26	0.4	V
VOL	IOL = 5.2 mA	6			0.26	0.4	V
II	VI = VCC or 0	6			±0.1	±1	µA
ICC	VI = VCC or 0, IO = 0	6		2	20	40	µA
Ci		2 to 6		3	10	10	pF

ESD Ratings

Table

Model	Rating
HBM (ANSI/ESDA/JEDEC JS-001)	±2000 V
CDM (JESD22-C101)	±1000 V

Pin configuration and functions (N/PDIP-14 package)

Table

Name	Pin (N)	I/O	Description
1A	1	Input	Channel 1, Input A
1B	2	Input	Channel 1, Input B
1Y	3	Output	Channel 1, Output Y
2A	4	Input	Channel 2, Input A
2B	5	Input	Channel 2, Input B
2Y	6	Output	Channel 2, Output Y
GND	7	—	Ground
3Y	8	Output	Channel 3, Output Y
3A	9	Input	Channel 3, Input A
3B	10	Input	Channel 3, Input B
4Y	11	Output	Channel 4, Output Y
4A	12	Input	Channel 4, Input A
4B	13	Input	Channel 4, Input B
VCC	14	—	Positive supply

Package dimensions (N = PDIP-14)

Package size (L × W): 19.3 mm × 9.4 mm
Body size (L × W): 19.30 mm × 6.40 mm

Additional device notes

Clamp diodes present on inputs and outputs (positive and negative direction). Exceeding recommended input/output voltage ratings may be acceptable if input/output clamp-current ratings are observed.

Step 4 — Cross-check symbol and footprint vs. datasheet Schematic symbol pin mapping vs. datasheet (N/PDIP-14)

Table

Pin Name	Schematic Pin No.	Datasheet Pin No. (N)	Match
1A	1	1	Yes
1B	2	2	Yes
1Y	3	3	Yes
2A	4	4	Yes
2B	5	5	Yes
2Y	6	6	Yes
GND	7	7	Yes
3Y	8	8	Yes
3A	9	9	Yes
3B	10	10	Yes
4Y	11	11	Yes
4A	12	12	Yes
4B	13	13	Yes
VCC	14	14	Yes

Footprint cross-check

Footprint node: a587f68f-0884-4147-98b1-d2b5e63258ea.defaultFootprint
Library asset: DIP794W53P254L1930H508Q14N.kicad_mod
- Descriptor notes “N (R-PDIP-T14)”, consistent with TI’s N (PDIP-14) package.
- Pads 1–14 defined in a standard 2-row, 2.54 mm pitch layout; Pin 1 pad is rectangular (keying).
3D model present: “SN74HC08NG4.stp” matches the MPN family.

Flags and potential issues

Schematic: All pin names and numbers match the datasheet for the N (PDIP-14) package. No symbol mismatches found.
Footprint: The footprint name and structure align with the N (PDIP-14) package indicated by the datasheet. No footprint mismatches found.
Temperature range note: The “Features” section cites –40°C to +85°C, whereas the “Recommended Operating Conditions” table entries extracted list –55°C to +125°C for SN74HC08 and SN54HC08. If temperature rating is critical, verify the exact ordering code’s temp grade in the datasheet ordering information to ensure the SN74HC08NG4 variant aligns with your target operating range.

If you want, I can add the proper symbol with these 14 pins and explicitly bind them to the DIP-14 pad numbers in the footprint so the part is ready to drop into designs.

Run DRC/ERC review

Check unused inputs

Verify footprint dimensions

BOM MPN consistency

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.2k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k