Part Review and Datasheet Update

Completed the RK809-5 part review and added the datasheet/metadata to the project properties. I created the full detailed report here: RK809-5 Part Review.
Key flags: the QFN-68-EP(7x7) footprint and 69-pad count match the datasheet, but pins 42/43 are named MIC1N/MIC1P while the datasheet table uses MICIN/MICIP, and most pins still have unspecified pin types/descriptions. The footprint uses a single large exposed-pad paste area; I’d recommend segmented paste and board-level thermal vias for robust assembly/thermal performance.
Set the pin type and datasheet-based pin description for every terminal. Group all terminals into logical symbol sections according to their functions and the datasheet recommendations. Ensure that pin names, pin numbers, pin types, descriptions, and section assignments are fully consistent with the official datasheet.
I’ll update every RK809-5 terminal with datasheet pin type, pin description, and section assignment, rename the microphone pins to the datasheet table names, then verify the terminal set afterward.
Done. I updated all 69 RK809-5 terminals with datasheet-based pin numbers, standard pin types, pin descriptions, and single logical section assignments.
I also renamed MIC1NMICIN and MIC1PMICIP to match the official datasheet pin table. Verification passed for terminal, terminal pin-number, and missing-property part review checks with no open warnings/errors.
Update review report
Check footprint mapping
Run full review
Improve EPAD footprint
FB2
Pin Number
8
BCLK
Pin Number
15
VCC_RTC
Pin Number
45
VCC_CPVDD
Pin Number
38
VCC1
Pin Number
11
HPR_OUT
Pin Number
41
MICIP
Pin Number
43
SCL
Pin Number
1
INT
Pin Number
7
VCC7
Pin Number
4
VREF
Pin Number
46
MICIN
Pin Number
42
SDI
Pin Number
17
FB1
Pin Number
13
SW2
Pin Number
9
VCC_1P8D
Pin Number
48
HPL_OUT
Pin Number
39
LDO8
Pin Number
5
LRCLK
Pin Number
14
XIN
Pin Number
50
SW1
Pin Number
12
GNDREF
Pin Number
47
CPN
Pin Number
36
SLEEP
Pin Number
49
CPP
Pin Number
37
LDO7
Pin Number
3
MCLK
Pin Number
16
SDA
Pin Number
2
LDO9
Pin Number
6
HP_SNS
Pin Number
40
VCC_1P8A
Pin Number
44
VCC2
Pin Number
10
VCC_CPVSS
Pin Number
35
XOUT
Pin Number
51


No results...

RK809-5

RK809-5 thumbnail
QFN-68-EP(7x7) Power Management - Specialized RoHS
The RK809-5 is a highly integrated Power Management Integrated Circuit (PMIC) from Rockchip designed for multi-core processor systems and embedded applications. It provides a complete power management solution by integrating multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, battery fuel gauging, RTC functionality, and audio codec capabilities into a single device. The RK809-5 is commonly used alongside Rockchip SoCs in single-board computers, tablets, AIoT devices, and industrial embedded systems.
Key Features
Five high-efficiency synchronous buck converters with fast transient response. Nine low-dropout (LDO) voltage regulators for powering sensitive analog and digital circuits. Integrated battery fuel gauge for battery capacity monitoring. Configurable power-up and power-down sequencing (OTP programmable). Dynamic Voltage Scaling (DVS/DVFS) support via I²C interface. Integrated Real-Time Clock (RTC) with 32.768 kHz crystal oscillator support. Two integrated load switches for peripheral power control. Over-current, over-voltage, and thermal protection features. Built-in audio CODEC with headphone driver and Class-D amplifier support. Designed to minimize external component count and simplify power system design. QFN-68-EP (7 mm × 7 mm) package.

Properties

QFN-68-EP(7x7)

RK809-5

Rockchip

Power Management IC (PMIC) with audio codec

IC

C2939628

parametric-v1

Pricing & Availability

See prices from popular manufacturers for your project.

Controls