Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part

Write a part description

Describe each pin

Operating conditions

Electrical max ratings

Part Specifications

Application circuits

Verify Part Details

Recommend similar parts

Check availability & lifecycle

Ready.

give me sample schematic for this component

heyjude

@copilot give me sample schematic for this component

copilot

Sure, let's develop a basic schematic to interface the NAND Flash Memory IC (MT29F4G08ABADAWP:D). It's a 4 Gbit NAND Flash memory with a parallel interface and 48 TSOP I package, typical for storage applications in embedded systems.

Let's assume you're connecting this memory IC to a microcontroller. We'll define the connections as follows:

Connections

Power Pins:
- Connect VCC_1:pin to 3.3V (or required supply voltage).
- Connect VCC_1_1:pin to 3.3V.
- Connect VCC_1_2:pin to 3.3V.
- Connect VCC_2:pin to 3.3V.
- Connect VSS_1:pin to GND.
- Connect VSS_1_1:pin to GND.
- Connect VSS_1_2:pin to GND.
- Connect VSS_2:pin to GND.
Data I/O Pins:
- Connect I/O0:pin to the microcontroller's data bus bit 0.
- Connect I/O1:pin to the microcontroller's data bus bit 1.
- Connect I/O2:pin to the microcontroller's data bus bit 2.
- Connect I/O3:pin to the microcontroller's data bus bit 3.
- Connect I/O4:pin to the microcontroller's data bus bit 4.
- Connect I/O5:pin to the microcontroller's data bus bit 5.
- Connect I/O6:pin to the microcontroller's data bus bit 6.
- Connect I/O7:pin to the microcontroller's data bus bit 7.
Control Pins:
- Connect CE#:pin to the microcontroller's chip enable pin.
- Connect RE#:pin to the microcontroller's read enable pin.
- Connect WE#:pin to the microcontroller's write enable pin.
- Connect ALE:pin to the microcontroller's address latch enable pin.
- Connect CLE:pin to the microcontroller's command latch enable pin.
- Connect WP#:pin to the microcontroller's write protect pin (optional, if supported/enabled).
Status Pins:
- Connect R/B#:pin to a GPIO pin on the microcontroller to monitor the ready/busy status.
Unused Pins:
- The NC (No Connect) and DNU (Do Not Use) pins should remain unconnected.
- NC pins: $NC_1, NC_2, NC_3, NC_4, NC_5, NC_6, NC_7, NC_8, NC_9, NC_10, NC_11, NC_12, NC_13, NC_14, NC_15, NC_16, NC_17, NC_18, NC_19, NC_20$ .
- DNU pins: $DNU1, DNU2$ .
- Optional: $R/B2#3, CE2#3$ can remain unconnected until required for multi-chip setups.

Sample Schematic in Text Format

Power Connections:
- Connect VCC_1 to 3.3V.
- Connect VCC_1_1 to 3.3V.
- Connect VCC_1_2 to 3.3V.
- Connect VCC_2 to 3.3V.
- Connect VSS_1 to GND.
- Connect VSS_1_1 to GND.
- Connect VSS_1_2 to GND.
- Connect VSS_2 to GND.
Data Connections:
- Connect I/O0 to MCU data bus bit 0 $($ MCU:D0 $)$ .
- Connect I/O1 to MCU data bus bit 1 $($ MCU:D1 $)$ .
- Connect I/O2 to MCU data bus bit 2 $($ MCU:D2 $)$ .
- Connect I/O3 to MCU data bus bit 3 $($ MCU:D3 $)$ .
- Connect I/O4 to MCU data bus bit 4 $($ MCU:D4 $)$ .
- Connect I/O5 to MCU data bus bit 5 $($ MCU:D5 $)$ .
- Connect I/O6 to MCU data bus bit 6 $($ MCU:D6 $)$ .
- Connect I/O7 to MCU data bus bit 7 $($ MCU:D7 $)$ .
Control Connections:
- Connect CE# to MCU:CE.
- Connect RE# to MCU:RE.
- Connect WE# to MCU:WE.
- Connect ALE to MCU:ALE.
- Connect CLE to MCU:CLE.
- Connect WP# to MCU:WP $($ optional $)$ .
Status Connections:
- Connect R/B# to MCU status GPIO $($ MCU:STATUS $)$ .

Remember to use proper decoupling capacitors close to the power pins of the IC for stability.

Would you like a visual representation or any further details on this?

heyjude

create the schematic for me

copilot

Creating a full visual schematic within the text environment isn't possible directly, but I can provide you with a structured list of the parts and their connections that you can easily input into Flux.

Schematic Connections in Text Format Power Connections

Connect $VCC\_1:pin$ to 3.3V.
Connect $VCC\_1\_1:pin$ to 3.3V.
Connect $VCC\_1\_2:pin$ to 3.3V.
Connect $VCC\_2:pin$ to 3.3V.
Connect $VSS\_1:pin$ to GND.
Connect $VSS\_1\_1:pin$ to GND.
Connect $VSS\_1\_2:pin$ to GND.
Connect $VSS\_2:pin$ to GND.

Data Connections

Connect $I/O0:pin$ to MCU:D0.
Connect $I/O1:pin$ to MCU:D1.
Connect $I/O2:pin$ to MCU:D2.
Connect $I/O3:pin$ to MCU:D3.
Connect $I/O4:pin$ to MCU:D4.
Connect $I/O5:pin$ to MCU:D5.
Connect $I/O6:pin$ to MCU:D6.
Connect $I/O7:pin$ to MCU:D7.

Control Connections

Connect $CE\#:pin$ to MCU:CE.
Connect $RE\#:pin$ to MCU:RE.
Connect $WE\#:pin$ to MCU:WE.
Connect $ALE:pin$ to MCU:ALE.
Connect $CLE:pin$ to MCU:CLE.
Connect $WP\#:pin$ to MCU:WP$($optional$)$.

Status Connections

Connect $R/B\#:pin$ to MCU:STATUS.

Ensure that all unused pins (NC and DNU) are left unconnected.

I will now generate a schematic diagram for you based on these connections. Please note that it will be in image form and you'll be able to view it directly. Let's proceed with creating the schematic image.

Code Interpreter

Python
import matplotlib.pyplot as plt
import networkx as nx

# Create a directed graph
G = nx.DiGraph()

# Add nodes for memory IC, MCU, and power sources
G.add_node('MT29F4G08ABADAWP:D', pos=(0, 0))
G.add_node('MCU', pos=(3, 0))

# Add power source nodes
G.add_node('3.3V', pos=(-1, 1))
G.add_node('GND', pos=(-1, -1))

# Define power and ground connections
power_connections = [
    ('3.3V', 'VCC_1'),
    ('3.3V', 'VCC_1_1'),
    ('3.3V', 'VCC_1_2'),
    ('3.3V', 'VCC_2'),
    ('GND', 'VSS_1'),
    ('GND', 'VSS_1_1'),
    ('GND', 'VSS_1_2'),
    ('GND', 'VSS_2')
]

# Define data connections
data_connections = [
    ('PMCU:D0', 'I/O0'),
    ('PMCU:D1', 'I/O1'),
    ('PMCU:D2', 'I/O2'),
    ('PMCU:D3', 'I/O3'),
    ('PMCU:D4', 'I/O4'),
    ('PMCU:D5', 'I/O5'),
    ('PMCU:D6', 'I/O6'),
    ('PMCU:D7', 'I/O7')
]

# Define control connections
control_connections = [
    ('PMCU:CE', 'CE#'),
    ('PMCU:RE', 'RE#'),
    ('PMCU:WE', 'WE#'),
    ('PMCU:ALE', 'ALE'),
    ('PMCU:CLE', 'CLE'),
    ('PMCU:WP', 'WP#')  # optional
]

# Define status connections
status_connections = [
    ('PMCU:STATUS', 'R/B#')
]

# Add edges for power connections
for source, target in power_connections:
    G.add_edge(source, 'MT29F4G08ABADAWP:D', label=target)

# Add edges for data connections
for source, target in data_connections:
    G.add_edge('MCU', 'MT29F4G08ABADAWP:D', label=f'{source}-{target}')

# Add edges for control connections
for source, target in control_connections:
    G.add_edge('MCU', 'MT29F4G08ABADAWP:D', label=f'{source}-{target}')

# Add edges for status connections
for source, target in status_connections:
    G.add_edge('MCU', 'MT29F4G08ABADAWP:D', label=f'{source}-{target}')

# Get positions
pos = nx.get_node_attributes(G, 'pos')

# Draw the graph
plt.figure(figsize=(12, 8))
nx.draw(G, pos, with_labels=True, node_size=3000, node_shape='s', node_color='lightblue', font_size=10, font_weight='bold', arrowsize=20)
nx.draw_networkx_edge_labels(G, pos, edge_labels={(u, v): d['label'] for u, v, d in G.edges(data=True)}, font_size=8, font_color='red')
plt.title('MT29F4G08ABADAWP:D NAND Flash Memory Schematic')
plt.show()

Image

Here is a simplified schematic visualization for your MT29F4G08ABADAWP:D NAND Flash Memory IC connected to a Microcontroller (MCU):

Power Connections:
- Connect 3.3V to VCC_1, VCC_1_1, VCC_1_2, VCC_2.
- Connect GND to VSS_1, VSS_1_1, VSS_1_2, VSS_2.
Data Connections:
- Connect MCU:D0 to I/O0:pin.
- Connect MCU:D1 to I/O1:pin.
- Connect MCU:D2 to I/O2:pin.
- Connect MCU:D3 to I/O3:pin.
- Connect MCU:D4 to I/O4:pin.
- Connect MCU:D5 to I/O5:pin.
- Connect MCU:D6 to I/O6:pin.
- Connect MCU:D7 to I/O7:pin.
Control Connections:
- Connect MCU:CE to CE#:pin.
- Connect MCU:RE to RE#:pin.
- Connect MCU:WE to WE#:pin.
- Connect MCU:ALE to ALE:pin.
- Connect MCU:CLE to CLE:pin.
- Connect MCU:WP to WP#:pin $($optional$)$.
Status Connection:
- Connect MCU:STATUS to R/B#:pin.

Important supplementary notes:

Unused Pins: Make sure that all NC (No Connect) and DNU (Do Not Use) pins are left unconnected.

You can now transfer these connections into your design in Flux. If you need a more detailed and precise layout, Flux's tools should allow you to easily assign and connect all the appropriate pins based on the information provided. If you have any further specifications or need additional components connected, let me know!

Someone is typing...

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.6k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M