Part Datasheet Review and Validation

Worked for 1 min 7 sec

Completed the part review and normalized the Datasheet URL to the official TI PDF: https://www.ti.com/lit/ds/symlink/drv8262-q1.pdf. I documented the detailed findings in DRV8262QDDWRQ1 Part Review (drv8262qddwrq1-part-review).

Open items flagged:

Description appears to overstate ratings: datasheet is 60 V operating, not 70 V operating; current is 16 A peak single / 8 A peak dual, not generic 20 A.
IPROPI and VREF dual-mode labels appear swapped versus the datasheet.
Pins 38/39 should include dual-mode aliases IN4/IN3.
Pin Type and Pin Description metadata are mostly missing/unspecified.

Suggested next steps:

Rename the swapped IPROPI/VREF symbol terminals.
Populate all Pin Type and Pin Description fields from the datasheet table.
Update the part description to a datasheet-accurate headline rating.

adrian95

Populate Pin Type and Pin Description fields for every terminal from the datasheet. and fix pin mismatches

Thought for 6 sec

flux

I’ll update every terminal’s Pin Type and Pin Description from the TI pin table, fix the swapped IPROPI/VREF names, add dual-mode aliases for pins 38/39, then re-read the schematic to verify.

Worked for 2 mins 40 sec

flux

Completed. I populated Pin Type and Pin Description for all 45 terminals from the TI datasheet and fixed the symbol/footprint mismatches.

Open items:

None from this requested pass; verification confirmed the renamed terminals also propagated to footprint pad designators.

Suggested next steps:

Run a final part validation/design review.
Verify footprint geometry dimensions against TI DDW0044E land pattern if you want a deeper mechanical check.

Validate and document

Run part validation

Check footprint geometry

Update review document

Check BOM properties

Files

Pins

Symbol

Layout

3D View

DRV8262QDDWRQ1