Part Review and Datasheet Update

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll review the part metadata against the official datasheet, update the Datasheet property if needed, then check symbol pins/footprint/pin descriptions and report any mismatches.

flux

Completed the part review and updated the Datasheet URL to the official Vicor PDF. The symbol pinout and 9-pad footprint broadly match the datasheet; key issues are a misleading project description (“3 20W” vs 26.67 A / 320 W), unspecified pin types/descriptions, and footprint drill/annular-ring dimensions not being visible in readback.
Full report: part-review-vicor-dcm3623t75h13c2t00
A

adrian95

Fix the description and pin metadata, then verify the footprint hole and annular-ring dimensions.

flux

I’ll update the project description and terminal pin metadata, then inspect/export the footprint data to verify drill and annular-ring dimensions against the Vicor land pattern.

flux

Completed: updated the project description, populated pin types/descriptions, and verified the footprint drills/annular rings from the raw KiCad footprint. The footprint dimensions match the Vicor datasheet: 2.03 mm drills with ~0.255/0.382 mm annular rings where required, and 1.52 mm signal drills with ~0.256 mm annular rings.
Detailed verification is in footprint-verification-dcm3623t75h13c2t00.
Review docs and export
Run final ERC/DRC
Update review doc
Export footprint file
Check part properties
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Terminal Order
+IN
A1
Power In
Terminal
Positive input power terminal
+OUT_1
A2
Power Out
Terminal
Positive output power terminal
TR
B1
Input
Terminal
Trim control input; enables/disables trim functionality and adjusts output voltage when trim is active
-OUT_1
B2
Power Out
Terminal
Negative output power return terminal
EN
C1
Input
Terminal
Enable input; enables/disables the power supply, internally pulled up to VCC and referenced to -IN
+OUT_2
C2
Power Out
Terminal
Positive output power terminal
FT
D1
Output
Terminal
Fault monitoring output; active when powertrain stops due to fault or EN low
-OUT_2
D2
Power Out
Terminal
Negative output power return terminal
-IN
E1
Power In
Terminal
Negative input power terminal; reference for control pins

DCM3623T75H13C2T00