Looking at the datasheet of this component, can yo...
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 4 sec
I’ll assign terminal ordering and orientations by functional group, keeping Power at order 1/top and Ground at order 10/bottom, then verify the properties across all pins.
Worked for 1 min 4 sec
Assigned Terminal Order and Pin Orientation across all 32 pins and verified the updates.
Open items:
- Note: there are three remaining non-power/ground groups but only two allowed side orientations (“Left”/“Right”), so Analog and Control both use Left while Digital I/O uses Right.
Suggested next steps:
- Review the symbol layout visually.
- If you want every group to have a unique orientation, allow one of the remaining groups to use Top or Bottom as well.
Fix orientations and ERC
Use unique orientations
Run ERC review
Arrange symbol visually
Export pin report
