Part Review and Datasheet Update
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 4 sec
I’ll review the part metadata, confirm or find the official datasheet, cross-check the symbol/footprint/pins against it, then report any mismatches.
Worked for 3 mins 17 sec
Completed the part review and created the report: AT13-2P-BM01 Part Datasheet Review.
Open items:
- Datasheet was already set, so I did not overwrite it; the official Amphenol URL was identified in the report.
- Main issues flagged: undefined pin descriptions, mount metadata not explicitly “Through Hole,” cosmetic footprint naming without hyphens, and no BOM row in the part project.
Suggested next steps:
- Update terminal descriptions to “Contact 1” and “Contact 2.”
- Change mount/package metadata to explicitly reflect through-hole right-angle PCB connector.
- Optionally replace the stored datasheet URL with the official Amphenol PDF URL.
Fix metadata and review
Fix flagged issues
Use official datasheet
Run part review
Check footprint naming
Refine this doc
Ask about this doc
AT13-2P-BM01 Part Datasheet Review
Scope
Reviewed available project information for published part
AT13-2P-BM01: project metadata/properties, schematic symbol terminal data, PCB footprint/layout data, assets, and datasheet-derived information.Project Information Observed
- Project / part name:
AT13-2P-BM01 - Manufacturer Part Number:
AT13-2P-BM01 - Manufacturer Name:
Amphenol Sine Systems Corp - Part Type:
Connector - Designator Prefix:
J - Mount property:
PCB - Datasheet URL currently set:
https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/2b285478a8cb1f9e7028be981ef9ff4fb11dedb3ee48686d5460ad8a1efb2091.pdf - Official datasheet found during web check:
https://www.amphenol-sine.com/pdf/datasheet/AT13-2P-BM01.pdf - Datasheet property was already populated, so no property update was required by the user instruction.
Datasheet Reference
- Document:
AT13-2P-BMXX, BoardLock PCB Mount Receptacle, 2 Pin, RA Flange, AT Series - Drawing revision: A2, revised 10JUL20
- Variant table:
AT13-2P-BM01= gold contact plating, no potting
Key Datasheet Specs
- Connector type: BoardLock PCB mount receptacle, right-angle flange, AT Series
- Positions / contacts: 2
- Mating part:
AT06-2S*plug - Current rating: 13 A
- Dielectric withstand: <2 mA leakage at 1500 VAC
- Insulation resistance: 1000 MΩ minimum at 25°C
- Moisture resistance: IP67 in mated condition
- Mating durability: 100 cycles
- Operating temperature: -55°C to +125°C
- Materials: thermoplastic housing, silicone rubber seal, copper alloy contacts
- Compliance: RoHS compliant
Schematic Symbol Cross-Check
Observed symbol implementation:
- Two terminal components/designators:
1and2 - Terminal pin numbers:
1,2 - Pin Type on both terminals:
Passive - Symbol pin positions are set
- Terminal pin names/descriptions appear as
undefinedin schematic inspection
Assessment:
- Pin count matches datasheet: 2 contacts.
- Pin numbering matches the expected two-contact connector representation.
- Passive pin type is appropriate for connector contacts.
- No explicit functional pin descriptions are present; for this connector, generic contact descriptions such as
Contact 1andContact 2would improve clarity.
Footprint Cross-Check
Observed footprint implementation:
- KiCad footprint asset name embedded in rule:
AT132PBM01.kicad_mod - Footprint description/value:
AT13-2P-BM01-1/AT132PBM01 - Contact pads:
- Pad 1: through-hole rectangular, at 0.000 mm, 0.000 mm, size 2.700 mm, drill 1.800 mm
- Pad 2: through-hole circular, at 5.400 mm, 0.000 mm, size 2.700 mm, drill 1.800 mm
- BoardLock / mounting holes:
- MH1: NPTH circular, at -6.455 mm, -1.900 mm, drill/size 3.430 mm
- MH2: NPTH circular, at 11.855 mm, -1.900 mm, drill/size 3.430 mm
- MH3: NPTH circular, at 2.700 mm, 6.100 mm, drill/size 3.430 mm
- 3D model:
AT13-2P-BM01.stp
Datasheet recommended PCB layout:
- Contact holes: 2 × Ø1.80 +0.10 / 0
- Contact spacing: 5.40 ±0.05 mm
- BoardLock / mounting holes: 3 × Ø3.43
- BoardLock hole spacing: 18.31 ±0.10 mm
- Additional boardlock pattern dimension: 6.10 ±0.10 mm
- Larger clearance regions shown: 3 × Ø6.6
Assessment:
- Contact drill diameter matches datasheet: 1.80 mm.
- Contact pitch matches datasheet: 5.40 mm.
- BoardLock/mounting hole drill diameter matches datasheet: 3.43 mm.
- BoardLock X spacing matches datasheet: 11.855 - (-6.455) = 18.31 mm.
- BoardLock Y offset for MH3 matches datasheet dimension: 6.10 mm relative to contact row reference.
- Pad 1 rectangular / Pad 2 circular convention is acceptable for pin-1 identification.
Mismatches / Issues Flagged
- Datasheet URL property is populated with a stored uploaded PDF, not the official Amphenol URL. This is not a functional error because a datasheet is available, but the official source URL is
https://www.amphenol-sine.com/pdf/datasheet/AT13-2P-BM01.pdf. - Pin descriptions are missing/undefined in the inspected schematic terminal data. Recommend adding
Contact 1andContact 2descriptions if the part library supports terminal-level descriptions. - Mount property says
PCBrather than explicitlyThrough Hole/PCB Through Hole. The footprint is through-hole and the description says through-hole; the property could be made more specific for search/filter consistency. - BOM inspection reports no BOM items. This may be normal for a published part project, but it means part-level metadata rather than BOM rows is the source of truth.
- Footprint file/value string omits hyphens (
AT132PBM01) while the MPN isAT13-2P-BM01. This is cosmetic if intentionally normalized, but exact MPN-style naming would reduce ambiguity.
Overall Result
The core part identity, two-pin schematic representation, pin numbering, passive terminal type, and PCB footprint geometry are consistent with the datasheet. The main cleanup items are metadata polish: use the official datasheet URL if desired, add terminal descriptions, and make the mount/package wording explicitly through-hole/right-angle connector.
Scope
Project Information Observed
Datasheet Reference
Key Datasheet Specs
Schematic Symbol Cross-Check
Footprint Cross-Check
Mismatches / Issues Flagged
Overall Result
