Part Review and Datasheet Update
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 4 sec
I’ll review the part metadata, confirm or find the official datasheet, cross-check the symbol/footprint/pins against it, then report any mismatches.
Worked for 3 mins 17 sec
Completed the part review and created the report: AT13-2P-BM01 Part Datasheet Review.
Open items:
- Datasheet was already set, so I did not overwrite it; the official Amphenol URL was identified in the report.
- Main issues flagged: undefined pin descriptions, mount metadata not explicitly “Through Hole,” cosmetic footprint naming without hyphens, and no BOM row in the part project.
Suggested next steps:
- Update terminal descriptions to “Contact 1” and “Contact 2.”
- Change mount/package metadata to explicitly reflect through-hole right-angle PCB connector.
- Optionally replace the stored datasheet URL with the official Amphenol PDF URL.
Fix metadata and review
Fix flagged issues
Use official datasheet
Run part review
Check footprint naming
Refine this doc
Ask about this doc
Part Datasheet Cross-Check — AT13-2P-BM01
Source data reviewed
- Project:
adrian95/at13-2p-bm01 - Project name / MPN:
AT13-2P-BM01 - Current part description:
2 Position Right Angle Flange Mount PCB Receptacle, Gray, Gold Plated Contacts Included - Indexed part-level properties found:
- Manufacturer Part Number:
AT13-2P-BM01 - Manufacturer Name:
Amphenol Sine Systems Corp - Datasheet URL:
https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/2b285478a8cb1f9e7028be981ef9ff4fb11dedb3ee48686d5460ad8a1efb2091.pdf - Mount:
PCB - Designator Prefix:
J - Description:
BOARDLOCK PCB MOUNT RECEPTACLE, 2 PIN, RA FLANGE, AT SERIES - Package:
Receptacle / connector, PCB mount right angle, flange - Pin Count:
2
- Manufacturer Part Number:
- Official Amphenol datasheet also found on the web:
https://www.amphenol-sine.com/pdf/datasheet/AT13-2P-BM01.pdf - Official product page:
https://www.amphenol-sine.com/AT13-2P-BM01-2-Position-Right-Angle-Flange-Mount-PCB-Receptacle-Grey-Gold-Plated-Contacts-Included_p_9401.html
Because a Datasheet URL was already set on the part, I did not overwrite it. The set URL appears to be an uploaded copy of the same Amphenol drawing; the official Amphenol URL above is the canonical source.
Key datasheet specs
- Manufacturer: Amphenol Sine Systems
- Series: AT / BoardLock
- Part/drawing family:
AT13-2P-BMXX - Specific variant:
AT13-2P-BM01 - Description: BoardLock PCB mount receptacle, 2 pin, right angle flange, AT Series
- Positions: 2
- Contact type: pin contacts
- Variant: gold contact plating, no potting in reservoir
- Housing material: thermoplastic
- Seal material: silicone rubber
- Contact material: copper alloy
- Current rating: 13 A
- Dielectric withstand: <2 mA leakage at 1500 VAC
- Insulation resistance: 1000 MΩ minimum at 25 °C
- Operating temperature: -55 °C to +125 °C
- Moisture resistance: IP67 when mated
- Mating part:
AT06-2S*plug - Mating cycle durability: 100 cycles
- RoHS compliant
Schematic symbol check
Project symbol currently exposes two terminal components:
Table
| Project terminal | Pin Number | Pin Type | Symbol position |
|---|---|---|---|
1 | 1 | Unspecified | x=-43, y=7.5 |
2 | 2 | Unspecified | x=-43, y=-6.5 |
Datasheet/product info confirms this is a 2-position connector. The extracted datasheet text does not provide electrical signal names for pins 1 and 2; they are generic connector contacts. A secondary front/mating-face reference indicates pin 2 is the upper contact and pin 1 is the lower contact.
Symbol verdict:
- Pin count: match — 2 terminals.
- Pin numbers: match — pins 1 and 2 are present.
- Pin descriptions: acceptable as generic/unspecified contacts; datasheet does not define signal-specific pin names.
- Potential improvement: set pin type/description to generic passive/contact wording, e.g.
Contact 1andContact 2, if desired for clarity.
Footprint check
Indexed PCB/layout data shows:
- Footprint asset present:
AT132PBM01.kicad_mod - 3D model asset referenced by project index:
AT13-2P-BM01.stp - Pads visible in indexed layout: electrical pads
1and2 - Mount-related pads/nodes visible in layout tree:
MH1,MH2,MH3 - Silkscreen/body outline is present in the flat layout view.
Datasheet recommended PCB layout includes extracted callouts such as:
3x Ø3.433x Ø6.62x Ø1.80 +0.1 / 0- key dimensions/spacings including
18.31 ±0.10,5.40 ±0.05,6.10 ±0.10, and8.00 ±0.10
Footprint verdict:
- Electrical pad count: likely match — pads 1 and 2 are present.
- Mechanical/board-lock features: likely present —
MH1,MH2, andMH3are visible in the layout tree. - Exact pad drill sizes, copper diameters, and coordinates could not be fully verified because the layout inspection output did not expose the underlying KiCad footprint geometry values.
- No confirmed footprint mismatch from available indexed data.
- Verification limitation: exact mechanical dimensions should be checked directly against
AT132PBM01.kicad_modif raw asset content is accessible.
Mismatches / flags
-
Datasheet URL is not the official Amphenol URL
The part already has a Datasheet URL, but it points to an uploaded storage copy. This is not necessarily wrong, but the official canonical URL ishttps://www.amphenol-sine.com/pdf/datasheet/AT13-2P-BM01.pdf. -
Pin type is
Unspecified
For a connector, this is not a functional mismatch, butPassiveor generic contact descriptions would be clearer. -
Footprint exact geometry not fully verifiable through indexed layout data
The expected electrical and mechanical features appear present, but raw pad/drill dimensions were not exposed by the inspection output, so this check is partial.
Overall conclusion
The part metadata, schematic pin count, pin numbering, package description, and visible footprint structure are consistent with the AT13-2P-BM01 datasheet. No confirmed electrical symbol mismatch was found. The only flags are the non-canonical stored datasheet URL, unspecified terminal pin types/descriptions, and incomplete access to raw footprint geometry for exact dimensional verification.
Source data reviewed
Key datasheet specs
Schematic symbol check
Footprint check
Mismatches / flags
Overall conclusion
