Create a schematic with the following components and connections:
Components:

Arduino Nano ESP32
RGB LED (common cathode)
3x resistor 220Ω
1x resistor 10kΩ
photoresistor (LDR)
LCD 16x2 with I2C module (PCF8574, address 0x27)

Connections:

Arduino D9 → 220Ω resistor → LED red anode
Arduino D10 → 220Ω resistor → LED green anode
Arduino D11 → 220Ω resistor → LED blue anode
LED common cathode → GND
Arduino 3.3V → photoresistor pin 1
photoresistor pin 2 → Arduino A1
photoresistor pin 2 → 10kΩ resistor → GND
Arduino A4 (SDA) → LCD SDA
Arduino A5 (SCL) → LCD SCL
Arduino VBUS (5V) → LCD VCC
Arduino GND → LCD GND