Create a schematic with the following components and connections: Components:

Arduino Nano ESP32 RGB LED (common cathode) 3x resistor 220Ω 1x resistor 10kΩ photoresistor (LDR) LCD 16x2 with I2C module (PCF8574, address 0x27)

Connections:

Arduino D9 → 220Ω resistor → LED red anode Arduino D10 → 220Ω resistor → LED green anode Arduino D11 → 220Ω resistor → LED blue anode LED common cathode → GND Arduino 3.3V → photoresistor pin 1 photoresistor pin 2 → Arduino A1 photoresistor pin 2 → 10kΩ resistor → GND Arduino A4 (SDA) → LCD SDA Arduino A5 (SCL) → LCD SCL Arduino VBUS (5V) → LCD VCC Arduino GND → LCD GND

You want a schematic that wires an Arduino Nano ESP32 to an RGB%20LED%20(common%20cathode), Generic Resistor parts, a photoresistor%20(LDR), and an LCD%2016x2%20with%20I2C%20module%20PCF8574%200x27.

You’re currently viewing a part project for ABX00083, not an editable design workspace, so the fastest path is to start a new project with your full schematic request prefilled. The current project is the Arduino board’s part definition, with MPN ABX00083 and datasheet URL already set in its properties

Click that link and Copilot will continue in a fresh editable project with your full request loaded.