Part Review and Datasheet Update
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 4 sec
I’ll inspect the part metadata, find/update the official datasheet if needed, then cross-check symbol pins, footprint, and descriptions against the datasheet.
Worked for 2 mins 25 sec
The part already has a Datasheet URL, so I did not overwrite it; I also found the official Molex family datasheet and exact 76829-0010 customer drawing for cross-checking.
Worked for 2 mins 58 sec
Completed the part review and saved the detailed findings in Part Review: Molex 0768290010 / 76829-0010.
Key result: symbol pin count/numbering and the 2×5 5.70 mm through-hole footprint match the Molex documentation. Main flags are the ambiguous
Mount: Wire property, minimal pin descriptions, and drill sizes sitting at the upper datasheet tolerance limit.Fix properties and rerun
Update Mount property
Add pin descriptions
Verify footprint tolerances
Export part package
