Part Data Review and Validation
2:04
Considering.
Using Schematic Tool.
Using BOM Tool.
Using PCB Layout Tool.
Looking for "part description, series name, part number, contact count, row count, pitch, termination style, mounting style, plating, and special features" in TE.Connect?C=1&PN=7-534206-5&M=BYPN&LG=1&I=13&button.x=32&button.y=16
Looking for "absolute maximum ratings" in TE.Connect?C=1&PN=7-534206-5&M=BYPN&LG=1&I=13&button.x=32&button.y=16
Looking for "recommended operating conditions" in TE.Connect?C=1&PN=7-534206-5&M=BYPN&LG=1&I=13&button.x=32&button.y=16
Looking for "electrical characteristics including current rating, voltage rating, contact resistance, insulation resistance, dielectric withstanding voltage, and temperature range" in TE.Connect?C=1&PN=7-534206-5&M=BYPN&LG=1&I=13&button.x=32&button.y=16
Looking for "pin numbering, cavity numbering, mating face layout, and pin descriptions" in TE.Connect?C=1&PN=7-534206-5&M=BYPN&LG=1&I=13&button.x=32&button.y=16
Looking for "mechanical dimensions, package dimensions, recommended pcb footprint dimensions, drill sizes, pad sizes, row spacing, and overall connector dimensions" in TE.Connect?C=1&PN=7-534206-5&M=BYPN&LG=1&I=13&button.x=32&button.y=16
Looking for "application notes, assembly notes, soldering notes, and any cautions or warnings" in TE.Connect?C=1&PN=7-534206-5&M=BYPN&LG=1&I=13&button.x=32&button.y=16
Looking for "overall dimensions, contact layout dimensions, row spacing, pitch, recommended printed circuit board hole pattern, hole diameter, pad diameter, and connector height" in DDEController?Action=srchrtrv&DocFormat=pdf&DocLang=English&DocNm=534206&DocType=Customer+Drawing&PartCntxt=7-534206-5
Looking for "mating face, pin numbering, cavity numbering, and any note describing contact numbering orientation" in DDEController?Action=srchrtrv&DocFormat=pdf&DocLang=English&DocNm=534206&DocType=Customer+Drawing&PartCntxt=7-534206-5
Looking for "electrical characteristics including contact resistance, insulation resistance, dielectric withstanding voltage, current rating, temperature rating, and durability" in DDEController?Action=srchrtrv&DocFormat=pdf&DocLang=English&DocNm=108-25022&DocType=Specification+Or+Standard&PartCntxt=7-534206-5
Looking for "absolute maximum ratings and performance requirements" in DDEController?Action=srchrtrv&DocFormat=pdf&DocLang=English&DocNm=108-25022&DocType=Specification+Or+Standard&PartCntxt=7-534206-5
Looking for "printed circuit board layout recommendations, soldering notes, hole size tolerances, solder mask recommendations, and manufacturing cautions" in DDEController?Action=srchrtrv&DocFormat=pdf&DocLang=English&DocNm=114-25018&DocType=Specification+Or+Standard&PartCntxt=7-534206-5
Looking for "board thickness recommendations and assembly process notes" in DDEController?Action=srchrtrv&DocFormat=pdf&DocLang=English&DocNm=114-25018&DocType=Specification+Or+Standard&PartCntxt=7-534206-5
Searching.
Fetching web page.
Part project summary
| Field | Result |
|---|---|
| MPN | 7-534206-5 |
| Manufacturer | TE Connectivity |
| Project description | 50 MODII VRT DR CE 100/115 |
| Product description | PCB Mount Receptacle, Vertical, Board-to-Board, 50 Position, 2.54 mm centerline, Gold, Through Hole - Solder |
| Series | AMPMODU / Modu Connector System |
| Type | Vertical PCB mount receptacle, socket contacts |
| Positions / rows | 50 positions / 2 rows |
| Pitch | 2.54 mm |
| Row spacing | 2.54 mm |
| Orientation | Vertical |
| Termination | Through Hole - Solder |
| Board retention | Without |
| Board standoff | Yes |
| Contact plating | Gold mating area, Tin termination area |
| Housing / contact features | Closed entry housing, phosphor bronze contacts, top entry |
Symbol / footprint structure found in the project
| Item | Result |
|---|---|
| Symbol pin count | 50 symbol terminals present |
| Footprint pad count | 50 pads present |
| Footprint asset | RHDR50W76P254_2X25_6350X503X813P.kicad_mod |
| 3D model | Present: 7-534206-5.stp |
| Footprint pattern encoded by asset name | 2 x 25, 63.50 x 5.03 x 8.13 mm class |
| Pad numbering | Pads 1...50 exist and map to symbol terminal IDs |
Electrical characteristics
| Parameter | Value |
|---|---|
| Current rating | 3 A max single contact, 2 A per contact fully energized connector |
| Voltage rating | 333 VAC |
| Low level contact resistance | 12 mΩ max |
| Insulation resistance | 5000 MΩ min initial |
| Withstanding voltage | 750 V rms at sea level for .100 CL system |
| Operating temperature | Product page: -65 to 105 °C |
| Temperature rise vs current | 30 °C max at specified current |
| Durability | 200 cycles for 30 µin gold, 100 cycles for 15 µin gold, 25 cycles for 10 µin gold, 75 cycles for 100 µin tin |
Absolute maximum / ratings
| Parameter | Value |
|---|---|
| Current | 3 A max single contact |
| Fully energized current | 2 A per contact max |
| Temperature | Spec page states -65 to 125 °C |
| Withstanding voltage | 750 V rms at sea level for .100 CL |
Recommended operating / application conditions
| Parameter | Value |
|---|---|
| PCB thickness | 1.40 mm to 2.40 mm in application spec |
| Product page operating temp | -65 to 105 °C |
| Placement accuracy for automation | 0.25 mm |
| Max PCB bow | 0.03 mm over connector length |
| Wave solder concerns | Prevent bridging, prevent wicking into receptacles, remove flux after soldering |
| Solderability | 95% minimum solder coverage |
Mechanical / package data
| Parameter | Value |
|---|---|
| Positions / rows | 50 / 2 |
| Pitch | 2.54 mm |
| Row spacing | 2.54 mm from official product page |
| Connector height | 5.03 mm [.198 in] from official product page |
| Termination post length | 2.92 mm [.115 in] |
| Footprint naming dimensions | 63.50 x 5.03 x 8.13 mm encoded in footprint filename |
Pin descriptions
| Item | Result |
|---|---|
| Pin names | Numeric only: 1...50 |
| Pin functional descriptions | No per-pin unique electrical functions found, which is expected for this connector family |
| Numbering note | Customer drawing notes contact numbering is for reference |
Manufacturing / assembly notes
| Topic | Result |
|---|---|
| Solder mask | Recommended between all lands |
| Trace between adjacent lands | Must be solder-mask covered |
| Storage caution | Avoid chemicals that can cause stress corrosion / cracking |
| UV caution | Prolonged UV exposure may degrade housing material |
| Reflow / process | Trial runs recommended under actual manufacturing conditions |
| Through-hole process | Hold-down recommended until soldering completes |
Good matches
| Check | Result |
|---|---|
| Total pin count | Match: symbol 50, footprint 50, product page 50 |
| Row count | Match: footprint asset is 2 x 25, datasheet says 2 rows |
| Pitch family | Match: 2.54 mm |
| Orientation / termination | Match: vertical, through-hole receptacle |
| Overall footprint width class | Match with product page height/width class around 5.03 mm |
Issues flagged
| Severity | Finding | Why it matters |
|---|---|---|
| High | Symbol pins are reported as undefined with Pin Type: Unspecified for all 50 terminals | This can degrade ERC quality and increase risk of incorrect symbol behavior in downstream designs |
| Medium | Project-level designator prefix is J, but symbol terminal properties show Designator Prefix: P | Not a manufacturing failure by itself, but can cause library inconsistency and confusion when instantiating the part |
| High, needs manual confirmation | Footprint file uses 0.95 mm drill and 1.425 mm pad size, while the extracted customer drawing data reported 1.02 mm ± 0.05 mm hole and 1.55 mm min pad diameter | If the drawing extraction is correct, the current footprint may be undersized, creating assembly risk, poor annular ring, or insertion problems |
| Medium | Datasheet sources are internally inconsistent on max operating temperature: product page 105 °C vs spec 125 °C | This is a part-documentation discrepancy that should be resolved before using the part at elevated temperature limits |
- The symbol-to-footprint pin count and numbering coverage look structurally correct.
- The largest possible manufacturing risk is the plated through-hole geometry: current footprint uses 0.95 mm drill / 1.425 mm pad, which may be too small if the official drawing requirement is really 1.02 mm hole / 1.55 mm pad min.
- The symbol metadata quality needs cleanup because all terminals are effectively untyped/undefined.
- I do not see evidence of a catastrophic pin-count mismatch, wrong row count, or wrong connector family.
Ready.
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #genericsjharwinbarrozo15.6k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
Pricing & Availability
See prices from popular manufacturers for your project.
Assets
7-534206-5
7-534206-5 Symbol.svgDefault
7-534206-5-thumb.png
7-534206-5-thumbThumbnail7-534206-5
RHDR50W76P254_2X25_6350X503X813P.kicad_modFootprint7-534206-5
7-534206-5.stp3D ModelControls
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.