Part Data Review and Verification
2:23
Planning data updates.
Fetching component details.
Checking if I can make the changes for you.
Reviewing the bill of materials.
Analyzing the schematic.
Analyzing the PCB layout.
Looking for "part overview description circuits pitch orientation contact position height plating and series" in 5051102091?display=pdf
Looking for "number of contacts circuit count and mounting tabs or fitting nails" in 5051102091?display=pdf
Looking for "electrical characteristics current rating voltage rating contact resistance insulation resistance dielectric withstanding voltage" in 5051102091?display=pdf
Looking for "absolute maximum ratings or maximum current maximum voltage temperature limits" in 5051102091?display=pdf
Looking for "recommended operating conditions operating temperature applicable fpc thickness mating cycles" in 5051102091?display=pdf
Looking for "pin assignments terminal numbering contact numbering and mounting pad numbering" in 5051102091?display=pdf
Looking for "package dimensions recommended pcb layout land pattern pad dimensions pitch overall length width height" in 5051102091?display=pdf
Looking for "special features bottom contact right angle easy on fd19 gold over nickel halogen free rohs locking actuator" in 5051102091?display=pdf
Looking for "material information contact material housing material actuator material plating details" in 5051102091?display=pdf
Looking for "ordering information package code and product specification reference" in 5051102091?display=pdf
Looking for "mechanical drawing overall dimensions width depth height recommended pcb layout pad dimensions pitch contact numbering mounting pad numbering" in 5051102091.pdf?inline=
Looking for "pin numbering contact numbering and orientation pin 1 location bottom contact right angle pull direction" in 5051102091.pdf?inline=
Looking for "dimensions A C overall length circuit dependent dimensions for 20 circuits" in 5051102091.pdf?inline=
Looking for "series drawing dimensions recommended pcb layout and contact numbering for 20 circuit variant 5051102091" in 5051101292_sd.pdf
Looking for "materials electrical characteristics operating temperature fpc thickness mating cycles" in 5051101292_sd.pdf
Looking for "pin 1 indicator contact numbering left to right orientation bottom contact 20 circuit variant" in 5051101292_sd.pdf
Looking for "recommended pcb layout dimensions for contact pads and fitting nails for 20 circuit variant" in 5051101292_sd.pdf
Looking for "overall connector dimensions width depth height for 20 circuit 5051102091" in 5051101292_sd.pdf
Running multiple web searches.
Found 2 results.
Found 0 results.
Found 0 results.
Looking for "5051102091 overall dimensions recommended pcb layout dimensions contact numbering and pin 1 orientation" in 5051100592_sd.pdf?inline
Looking for "5051102091 electrical characteristics materials operating temperature fpc thickness mating cycles plating" in 5051100592_sd.pdf?inline
Looking for "5051102091 recommended pcb layout A B C D values for 20 circuit variant" in 5051100592_sd.pdf?inline
Looking for "5051102091 bottom contact right angle pin numbering left to right" in 5051100592_sd.pdf?inline
1) Available part information
| Field | Value |
|---|---|
| Manufacturer | Molex |
| MPN | 5051102091 |
| Part type | Connector |
| Project description | Easy-On FFC/FPC Connector, 0.50 mm pitch, FD19 series, right-angle, bottom contact, 1.90 mm height, 20 circuits, gold over nickel plating |
| Designator prefix | J |
| Schematic symbol contents | 20 signal terminals + 2 fitting-nail terminals |
| Footprint contents | 20 signal pads + 2 mounting/fitting-nail pads |
| 3D model asset | 5051102091.stp |
| Footprint asset | 5051102091.kicad_mod |
Overview
| Item | Datasheet value |
|---|---|
| Series | FD19 / 505110 |
| Connector type | Easy-On FFC/FPC connector |
| Circuits | 20 |
| Pitch | 0.50 mm |
| Orientation | Right-angle |
| Contact position | Bottom contact |
| Mated height | 1.90 mm |
| Packaging | Embossed package |
| Compliance/features | RoHS, halogen free, locking actuator |
Electrical characteristics
| Parameter | Datasheet value |
|---|---|
| Current rating | 0.5 A |
| Voltage rating | 50 V |
| Contact resistance | 40 mΩ max |
| Insulation resistance | 100 MΩ min |
| Dielectric withstanding voltage | 250 V AC for 1 minute |
Recommended operating conditions / use conditions
| Parameter | Datasheet value |
|---|---|
| Operating temperature | -40 C to +105 C |
| Applicable FPC/FFC thickness | 0.30 mm +0.04 / -0.03 |
| Also seen in series drawing | 0.30 mm +0.04 / -0.03 to 0.35 mm +0.04 / -0.03 |
| Recommended base film thickness | 25 um |
| Recommended conductor thickness | 35 um or 50 um |
| Mating cycles | 20 cycles |
Materials and plating
| Item | Datasheet value |
|---|---|
| Housing | LCP, glass filled, UL94V-0, beige |
| Actuator | PA, glass filled, UL94V-0, black |
| Terminal material | Phosphor bronze |
| Fitting nail material | Phosphor bronze |
| Contact area plating | Gold, 0.05 um minimum |
| Solder tail plating | Gold |
| Terminal underplate | Nickel, 1.0 um minimum |
| Fitting nail plating | Tin, 1.0 um minimum |
| Fitting nail underplate | Nickel, 1.0 um minimum |
Pin / terminal description
| Item | Datasheet finding |
|---|---|
| Signal contacts | 20 signal contacts |
| Mechanical tabs | 2 fitting nails / mounting pads |
| Numbering | Single row of 20 contacts plus 2 fitting nails |
| Pin 1 orientation | Not cleanly recoverable from text extraction alone |
Table
| Category | Datasheet value |
|---|---|
| Recommended PCB layout A | 10.5 mm |
| Recommended PCB layout B | 13.1 mm |
| Recommended PCB layout C | 9.5 mm |
| Recommended PCB layout D | 14.7 mm |
| Embossed package A | 10.9 mm |
| Embossed package B | 14.9 mm |
| Embossed package C | 16 mm |
| Pitch | 0.50 ±0.05 mm |
Cross-check results
| Check | Result | Notes |
|---|---|---|
| Contact count | Pass | Symbol and footprint both represent 20 contacts. |
| Fitting nails / mounting pads | Pass | Symbol includes 2 fitting-nail terminals and footprint includes 2 larger pads. |
| Pitch consistency | Pass | Footprint uses 0.50 mm contact spacing, matching the datasheet. |
| Bottom-contact / right-angle type | Pass | Project metadata matches datasheet description. |
| Height / product family | Pass | Project description matches the Molex part overview. |
| Footprint pad topology | Pass | Single fine-pitch signal row plus two larger mechanical pads is consistent with the datasheet. |
| Pin numbering orientation | Needs manual visual check | I could not conclusively verify pin 1 left/right orientation from machine-extracted drawing text alone. This is the main residual risk. |
| Plating metadata wording | Minor metadata mismatch | Project description says gold over nickel plating, but the drawing is more specific: fitting nails are tin over nickel, while signal contacts are gold over nickel. Not a footprint failure, but metadata could be more precise. |
-
Highest-risk item: contact numbering orientation.
If the footprint is mirrored relative to the official Molex drawing, the cable pinout would be reversed even though pad count and pitch are correct. That can cause:- incorrect board function
- apparent assembly success but electrical failure
- wrong mating orientation in-system
-
Minor documentation issue: plating description is simplified in the project metadata.
That is unlikely to cause board failure, but it could cause ordering ambiguity if this part project is reused downstream as a purchasing reference.
- The part project looks mostly consistent with the Molex documentation.
- I do not see an obvious count, pitch, or mounting-pad mismatch that would immediately cause a manufacturing failure.
- The one item I would still treat as must-verify is the pin 1 / contact-row orientation against the official drawing image, because that is the classic failure mode for bottom-contact FFC connectors.
Ready.
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibraryjharwinbarrozo15.6k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
5051102091
Properties
5051102091
Molex
Connectors
J
Pricing & Availability
See prices from popular manufacturers for your project.
Assets
5051102091
5051102091.stp3D Model
5051102091
5051102091 Symbol.svgDefault
5051102091-thumb.png
5051102091-thumbThumbnail5051102091
5051102091.kicad_modFootprintControls
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.