Part Review and Datasheet Update

adrian95

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
a day

flux

3:51

Reviewing information necessity.

Reviewing the bill of materials.

Analyzing the schematic.

Analyzing the PCB layout.

Looking for "Extract the official part number, manufacturer, description, package or mechanical form, material/color, pin/terminal count, electrical/current ratings if present, dimensions relevant to footprint, and any notes for Keystone 5000 test point connector." in product-pdf.cfm?p=1309

Looking for "Find the pin or terminal information for Keystone 5000: pin count, pin name/function, recommended PCB hole or footprint dimensions, and mechanical drawing details." in product-pdf.cfm?p=1309

Working.

Analyzing the PCB layout.

Searching the project.

Searching 3 domains.

Searching 3 domains.

Searching 3 domains.

Looking for footprint details.

Searching fetch_url.

Looking for "Keystone 5000 terminal dimensions mounting hole recommended PCB hole pad diameter pin" in K75p62.pdf

Clarifying PCB details.

Search complete — 61 results across 5 domains.

Documenting test point details.

Reviewed the part against the official Keystone datasheet already set on the project, so no Datasheet URL update was needed. The main issues are: terminal pin type is Unspecified instead of passive/test-point style, pin description is missing, manufacturer name is shortened, package/case metadata is missing, and the footprint drill size needs confirmation against the 0.040 in / ~1.0 mm datasheet hole. Full review is in Keystone 5000 Part Information Review.
Fix part metadata
Check drill size
Run ERC/DRC
Show BOM entry
a day
Sign up to send

Refine this doc
Ask about this doc
Keystone 5000 Part Information Review
Scope
Reviewed the current Flux part project metadata, schematic terminal, available footprint/3D/symbol assets, and the official datasheet URL already present on the project. The part-project sync workflow requires using the datasheet as the source of truth, exact pin-number matching, and exact terminal count matching.

Current Project Metadata

FieldCurrent project valueDatasheet / review resultStatus
Manufacturer Part Number50005000OK
Manufacturer NameKeystoneKeystone Electronics Corp.Minor mismatch / shortened name
Datasheet URLhttp://www.keyelco.com/product-pdf.cfm?p=1309Official Keystone product PDF was already setOK; no web search/update needed
Part TypeConnectorsThrough-hole PC test point / connector-style test pointAcceptable, though “Test Point” or “Connector” would be more precise
Designator PrefixJJ is appropriate for connector/test-point style partOK
DescriptionKEYSTONE - 5000 - TEST POINT, CONNECTOR, REDMiniature THM Test Point - RedOK but could be clearer
Package / Case CodeNot setTHM / through-hole miniature PC test pointMissing recommended property
Max CurrentNot setNot specified in the Keystone PDFOK to leave unset
Datasheet-Derived Key Specs
  • Part: Keystone Electronics 5000
  • Function: Single red through-hole miniature PC test point for probe/clip hookup
  • Mounting: Through-hole mount (THM)
  • Terminal count: 1 electrical terminal / 1 mounting hole
  • Recommended PCB hole: 0.040 in diameter, approximately 1.0–1.02 mm
  • Terminal/contact material: 0.010 in × 0.020 in phosphor bronze
  • Finish: Silver plate
  • Base material: Nylon 46, UL 94V-0
  • Color: Red
  • Current rating: Not specified in the provided Keystone PDF
  • Notable use notes: Snap-fit retention for wave soldering, wire-form loop for safe non-slip testing, suitable for high-density PC boards, usable with J-hooks/EZ-hooks/grabbers/alligator clips/probes.

Schematic Symbol / Terminal Cross-Check

Datasheet expectationCurrent schematicStatus
1 terminal/pin1 terminal component presentOK
Pin number 1Terminal has Pin Number: 1OK
Single test-point functionTerminal designator is 1; no pin description property observedUsable, but description missing
Passive probe/test node behaviorPin Type: UnspecifiedMismatch / improvement recommended: set to Passive or equivalent passive terminal type
Symbol Notes
  • The project has a default symbol asset: 5000 Symbol.svg.
  • The terminal count matches the datasheet’s single electrical test point.
  • The main mismatch is metadata quality on the terminal: the terminal is electrically passive but is currently typed as Unspecified, and no concise pin description such as “Test Point Terminal” was found.

Footprint / Mechanical Cross-Check

Datasheet expectationCurrent projectStatus
Single through-hole plated pad / mounting holeFootprint contains one pad named/designated 1OK by pad count
Recommended drill/hole: 0.040 in / ~1.0–1.02 mmPad geometry/hole size was not exposed in the current layout query resultNeeds manual/asset verification
Through-hole test-point body / loop3D model asset 5000.stp is presentOK
Footprint asset5000.kicad_mod present and marked as footprintOK
Footprint Notes
  • The available layout tree shows a default footprint with one pad, which matches the datasheet’s one-terminal part.
  • I could not confirm the pad’s drill diameter or annular ring from the accessible layout data. The key footprint item to verify is that pad 1 is a through-hole pad with a ~1.0 mm drill matching the Keystone datasheet.

Assets Review

AssetTypeRoleStatus
5000.stpSTEP3D modelPresent
5000.kicad_modKiCad footprintDefault footprintPresent
5000 Symbol.svgSVGDefault symbol / thumbnailPresent
Mismatches / Issues Flagged
  1. Terminal pin type is Unspecified
    • Datasheet function is a passive single test-point terminal.
    • Recommended correction: set terminal Pin Type to Passive.
  2. Terminal pin description is missing
    • Recommended property: Pin Description = Test Point Terminal.
  3. Manufacturer name is shortened
    • Current: Keystone
    • Datasheet: Keystone Electronics Corp.
    • Recommended correction: update Manufacturer Name to the official datasheet name if you want canonical metadata.
  4. Package / Case Code is missing
    • Recommended value: THM, miniature through-hole PC test point or similar concise package/mechanical form.
  5. Footprint drill size could not be confirmed from accessible layout data
    • Datasheet requirement: 0.040 in / ~1.0–1.02 mm mounting hole.
    • Recommended verification: inspect the 5000.kicad_mod footprint pad drill and ensure pad 1 is a plated through-hole with ~1.0 mm drill.
If you want me to clean this part up, the safe metadata updates are:
  • Project property: Manufacturer Name = Keystone Electronics Corp.
  • Project property: Package or Case Code = THM miniature through-hole PC test point
  • Terminal 1: Pin Type = Passive
  • Terminal 1: Pin Description = Test Point Terminal
I would not set Max Current, because the datasheet extraction did not provide a current rating.

    Scope

    Current Project Metadata

    Datasheet-Derived Key Specs

    Schematic Symbol / Terminal Cross-Check

    Symbol Notes

    Footprint / Mechanical Cross-Check

    Footprint Notes

    Assets Review

    Mismatches / Issues Flagged

    Recommended Fixes

Documents

    Keystone 5000 Part Information Review

Assets

stp

5000

5000.stp3D Model
kicad_mod

5000

5000.kicad_modFootprint
5000

5000

5000 Symbol.svgDefault
5000-thumb.png

5000-thumb.png

5000-thumbThumbnail

5000

5000 thumbnail
KEYSTONE - 5000 - TEST POINT, CONNECTOR, RED Red PC Test Point, Miniature Phosphor Bronze Silver Plating Through Hole Mounting Type

Properties

5000

Keystone

Connectors

keyelco.com/userAssets/file/K75p62.pdf

J

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls