Pin Grouping by Function

Thought for 5 sec

I’ll simplify the current categories by merging related functions—for example, SuperSpeed TX/RX into SuperSpeed, CC/SBU into Control, and shields into Shield—while retaining Power, Ground, and USB2.

Worked for 1 min 36 sec

flux

Simplified the functional groups to:

Power
Ground
SuperSpeed
USB2
Control
Shield

All 28 pins remain intact, with each Section matching its Pin Group.

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

Thought for 5 sec

flux

There are six groups but only four orientations. With Power = Top and Ground = Bottom, the remaining four groups must share Left and Right, so every group cannot have a unique orientation.

Should I alternate the remaining groups between Left and Right while assigning each group a unique Terminal Order from 2–9?

Alternate left and right

Use paired side groups

Choose optimal arrangement

Waiting for input

Files

Pins

Symbol

Layout

3D View

1054500101