Pin Grouping by Function

A

adrian95

Make the functional group more general

flux

I’ll simplify the current categories by merging related functions—for example, SuperSpeed TX/RX into SuperSpeed, CC/SBU into Control, and shields into Shield—while retaining Power, Ground, and USB2.

flux

Simplified the functional groups to:
  • Power
  • Ground
  • SuperSpeed
  • USB2
  • Control
  • Shield
All 28 pins remain intact, with each Section matching its Pin Group.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

There are six groups but only four orientations. With Power = Top and Ground = Bottom, the remaining four groups must share Left and Right, so every group cannot have a unique orientation.
Should I alternate the remaining groups between Left and Right while assigning each group a unique Terminal Order from 2–9?
Alternate left and right
Use paired side groups
Choose optimal arrangement
Sign up to send

Files

Pins

Symbol

Layout

3D View

No files yet