Part Datasheet Review and Validation

Thought for 5 mins 23 sec

flux

Here’s a complete, in-order execution of your 4 requested steps.

Review of available part information

Part: 10151348-00011LF
Manufacturer: Amphenol Communications Solutions (per project description)
Description (from datasheet): USB TYPE C FEMALE R/A UP RIGHT TYPE
Package/style: Through-hole, right-angle, upright (from datasheet description)
Pin count on symbol/footprint:
- 14 signal contacts: VBUS x4, GND x4, DPx x2, DNx x2, CCx x2
- 4 shield tabs
- Total pads present in footprint: 18
Project properties present:
- Designator Prefix: J
- Manufacturer Part Number: 10151348-00011LF
- No “Datasheet” property was set prior to this step

Datasheet URL

Prepared to add/update the project’s Datasheet property to: Datasheet

Extracted metadata from the datasheet Electrical characteristics

Current rating: 5.0 A
Voltage rating: 5.0 V
Contact resistance (LLCR): VBUS & GND pins and other pins: 40 mΩ/pin max
Shell resistance: 50 mΩ max
LLCR max change (all pins): 10 mΩ
Insulation resistance: 100 MΩ min
Dielectric withstand: AC 100 V for 1 minute

Environmental and soldering

Operating temperature: -25°C to +85°C
Soldering survivability: Housing withstands 260°C peak for 10 s (wave or reflow)

Mechanical/materials/plating (from notes)

Insertion force: 0.5–2.0 kgf
Removal force: 0.8–2.0 kgf
Durability: 10000 cycles
Materials:
- Housing: High temperature thermoplastic, UL94 V-0
- Contacts: Copper alloy
- Mid plate: Stainless steel
- Front shell: Stainless steel
- Cover: Stainless steel
Plating:
- Contacts: Ni 50 µin min underplate overall; Au on contact area (thickness per P/N); Gold flash on solder area
- Front shell: Ni 30 µin min underplate overall
- Middle plate & cover: “Clear only”
- Contact plating variants indicated: Gold flash, 30 µin Au, 15 µin Au (selection follows exact P/N)

Pin descriptions (as listed)

A1: GND
A4: VBUS
A5: CC1
A6: DP1
A7: DN1
A9: VBUS
A12: GND
B1: GND
B4: VBUS
B5: CC2
B6: DP2
B7: DN2
B9: VBUS
B12: GND

Package dimensions / PCB layout

Drawing includes outline dimensions and recommended PCB layout/land pattern. Numeric values could not be auto-extracted here; refer to the PDF drawing figures directly.
Noted dimension in drawing text: “Ø3.00 (picking up area)”

Cross-check: schematic symbol and footprint vs datasheet

Symbol pin mapping vs datasheet

A1 GND -> GND_A (Pin Number A1): MATCH
A4 VBUS -> VBUS_A (A4): MATCH
A5 CC1 -> CC1 (A5): MATCH
A6 DP1 -> DP1 (A6): MATCH
A7 DN1 -> DN1 (A7): MATCH
A9 VBUS -> VBUS_A__1 (A9): MATCH
A12 GND -> GND_A__1 (A12): MATCH
B1 GND -> GND_B (B1): MATCH
B4 VBUS -> VBUS_B (B4): MATCH
B5 CC2 -> CC2 (B5): MATCH
B6 DP2 -> DP2 (B6): MATCH
B7 DN2 -> DN2 (B7): MATCH
B9 VBUS -> VBUS_B__1 (B9): MATCH
B12 GND -> GND_B__1 (B12): MATCH

Shield tabs

Footprint/symbol includes four shield tabs: SHIELD, SHIELD__1, SHIELD__2, SHIELD__3 — presence matches the drawing’s shell features.

Pad count and roles

Footprint pads found: VBUS_A, VBUS_A__1, VBUS_B, VBUS_B__1, GND_A, GND_A__1, GND_B, GND_B__1, DP1, DN1, DP2, DN2, CC1, CC2, and the four shields listed above. This matches the datasheet’s 14 contacts plus shell tabs for a USB 2.0 Type‑C receptacle.

Pin types in symbol

VBUS/GND marked Power In; DP/DN/CC marked Passive. Acceptable for a connector symbol; no mismatch to datasheet pin functions.

Footprint geometry checks

What matches:
- Pad naming and count align with the datasheet pin map.
- Distinct shield pads are present.
Items to verify (could not extract numerics automatically):
- Exact pad sizes, pitch, anti-pad/keepout, and hole/slot dimensions against the “Recommended PCB layout/land pattern” in the Datasheet.
- Confirm any “Ø3.00 (picking up area)” callouts in the drawing match the footprint features.
No mismatches were detected in pin naming or count. Dimensional conformance should be confirmed visually/mechanically against the drawing.

If you want, I can proceed to:

Apply the Datasheet property update noted above.
Pull specific dimension callouts from the drawing into a checklist and compare against the current footprint geometry one by one.

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.7k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k
Push Button
A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
jharwinbarrozo
490.7k
T491D226K025AT
22 µF Molded Tantalum Capacitors 25 V 2917 (7343 Metric) 800mOhm #Capacitors #Tantalum #22uF #part
vasyl
448.3k