Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project

Write a project description

Find schematic issues

Create a test plan

Simulate a circuit

Prepare for Manufacturing

Component Selection Workflow

New Subsystem Wizard

Write I2C initialization code

Generate firmware skeleton

create a high level mermaid block diagram of Y3. Include key component's manufac...

zenomagna

connect the ECS-1612MV-260-CN-TR crystal to the esp 8266ex

zenomagna

@copilot create a high level mermaid block diagram of Y3. Include key component's manufacturer part number in each block whenever possible.

copilot

Below is a high-level Mermaid block diagram of the component designated as Y3, an ECS-1612MV-260-CN-TR crystal oscillator.

Diagram

This diagram captures the basic pinout structure of the ECS-1612MV-260-CN-TR crystal oscillator, showing the connections from the component to its pins.

zenomagna

connect the ECS-1612MV-260-CN-TR crystal to the esp 8266ex

copilot

To connect the ECS-1612MV-260-CN-TR crystal oscillator (Y3) to the ESP8266EX (IC1), we need to make sure we align the corresponding pins correctly. Here's how you can connect them:

VDD: This is the power supply pin of the crystal oscillator.
GND: This is the ground pin of the crystal oscillator.
OUTPUT: This is the output pin of the crystal oscillator.
STAND-BY: This pin is used to enable or disable the oscillator.

Here are the specific connections between Y3 and IC1:

Y3:VDD to IC1:VDDA_1, IC1:VDDA_2, IC1:VDD3P3_1, and IC1:VDD3P3_2.
Y3:GND to **IC1:EP_ $(GND)$ .
Y3:OUTPUT to IC1:XTAL_OUT.
Y3:STAND-BY: This pin can be connected to a GPIO pin on IC1 for control or tied to a logic level to keep the oscillator always enabled. For simplicity, let's connect it to IC1:GPIO0.

In formatted list:

Connect Y3:VDD to IC1:VDDA_1, IC1:VDDA_2, IC1:VDD3P3_1, and IC1:VDD3P3_2.
Connect Y3:GND to **IC1:EP_ $(GND)$ .
Connect Y3:OUTPUT to IC1:XTAL_OUT.
Connect Y3:STAND-BY to IC1:GPIO0.

zenomagna

xtal in?

copilot

You are correct. The crystal oscillator should interface with both the XTAL input and output pins of the ESP8266EX for accurate clock generation.

For the ECS-1612MV-260-CN-TR (Y3) crystal oscillator and the ESP8266EX (IC1), the additional connection between the crystal and the microcontroller would be:

XTAL_IN (on IC1) should be connected to the appropriate source. However, since the ECS-1612MV-260-CN-TR has a single output, it only requires connection to XTAL_OUT on IC1.

Here's the corrected and complete set of connections:

Connect Y3:VDD to IC1:VDDA_1, IC1:VDDA_2, IC1:VDD3P3_1, and IC1:VDD3P3_2.
Connect Y3:GND to IC1:EP$ (GND)$.
Connect Y3:OUTPUT to IC1:XTAL_IN.
Connect Y3:OUTPUT to IC1:XTAL_OUT.
Connect Y3:STAND-BY to IC1:GPIO0.

Or, condensing everything in a single list:

Connect Y3:VDD to IC1:VDDA_1, IC1:VDDA_2, IC1:VDD3P3_1, and IC1:VDD3P3_2.
Connect Y3:GND to IC1:EP$ (GND)$.
Connect Y3:OUTPUT to IC1:XTAL_IN and IC1:XTAL_OUT.
Connect Y3:STAND-BY to IC1:GPIO0.

how to make an esp 8266ex work, what crystal do i need

zenomagna

@copilot how to make an esp 8266ex work, what crystal do i need

copilot

To make the ESP8266EX function correctly, there are several basic components and connections you need to set up, including the power supply, crystal oscillator, and proper pin connections.

Here's how you can connect the ESP8266EX:

Essential Connections

Power Supply:
- Connect VDD3P3_1 (Pin 3), VDD3P3_2 (Pin 4), VDDPST_1 (Pin 11), VDDPST_2 (Pin 17) to a 3.3V power supply.
- Connect VDD_RTC (Pin 5) and VDDA (Pins 1, 30) to the same 3.3V power supply.
- Connect GND (Pin 33) to ground.
Enable Pin:
- Connect CHIP_EN (Pin 7) to the 3.3V power supply via a pull-up resistor (typically 10kΩ).
Crystal Oscillator:
- You'll need a 26MHz crystal oscillator. Connect XTAL_IN (Pin 28) and XTAL_OUT (Pin 27) to a 26MHz crystal.
- Place two capacitors (typically 10-22pF) between the crystal pins and ground.
UART for Communication:
- Connect U0TXD (Pin 26) to the RXD of your UART-to-USB converter.
- Connect U0RXD (Pin 25) to the TXD of your UART-to-USB converter.
Reset Pin:
- Connect EXT_RSTB (Pin 32) to a push button that pulls the pin to ground when pressed.

Specific Connections

In a more formal way, the required connections can be summarized as:

Connect IC1:VDD3P3_1 to power supply 3.3V.
Connect IC1:VDD3P3_2 to power supply 3.3V.
Connect IC1:VDDPST_1 to power supply 3.3V.
Connect IC1:VDDPST_2 to power supply 3.3V.
Connect IC1:VDD_RTC to power supply 3.3V.
Connect IC1:VDDA_1 to power supply 3.3V.
Connect IC1:VDDA_2 to power supply 3.3V.
Connect IC1:CHIP_EN to power supply 3.3V via a 10kΩ pull-up resistor.
Connect IC1:U0TXD to the RXD pin of UART-to-USB converter.
Connect IC1:U0RXD to the TXD pin of UART-to-USB converter.
Connect IC1:XTAL_IN to one pin of the 26MHz crystal.
Connect IC1:XTAL_OUT to the other pin of the 26MHz crystal.
Place a 10-22pF capacitor between IC1:XTAL_IN and ground.
Place a 10-22pF capacitor between IC1:XTAL_OUT and ground.
Connect IC1:EXT_RSTB to a push button or switch for resetting the ESP8266EX with one side connected to ground.

Assumptions:

The power supply is a stable 3.3V source.
The UART-to-USB converter allows you to program and communicate with the ESP8266EX.
The external components, such as the crystal and capacitors, are chosen correctly to match the requirements of the ESP8266EX.

These key connections should get your ESP8266EX up and running. Adjust any specifics based on your exact setup and requirements. If you need more detailed instructions on firmware flashing or additional hardware peripherals, feel free to ask!

zenomagna

what crystal model do i need

copilot

For the ESP8266EX, you'll need a 26MHz crystal oscillator. The ECS-1612MV-260-CN-TR can be a suitable choice. Here is a summary of the specifications that align with requirements for ESP8266EX:

Recommended Crystal Oscillator:

Model: ECS-1612MV-260-CN-TR
Frequency: 26.000 MHz

Key Features:

Package Size: 1.6 x 1.2 mm
Frequency Stability: Includes initial tolerance, temperature, supply voltage, and load change reflow frequency shift, and aging, e.g., ±25 ppm (customizable)
Supply Voltage Range: 1.6V - 3.6V (MultiVolt™ capability)
Typical Load Capacitance: 10-22pF external capacitors required

Connection to ESP8266EX:

XTAL_IN (Pin 28) on ESP8266EX to one pin of the crystal oscillator Y2:OUTPUT (Pin 3).
XTAL_OUT (Pin 27) on ESP8266EX to the other pin of the crystal oscillator Y2:STAND-BY (Pin 1).
Use two load capacitors (typically 10-22pF) between each crystal pin and ground.

Suggested Connections:

Connect IC1:XTAL_IN (Pin 28) to Y2:OUTPUT (Pin 3).
Connect IC1:XTAL_OUT (Pin 27) to Y2:STAND-BY (Pin 1).
Place a capacitor (10-22pF) between Y2:OUTPUT (Pin 3) and GND.
Place a capacitor (10-22pF) between Y2:STAND-BY (Pin 1) and GND.

Example Setup:

Markdown
Connect Y2:OUTPUT to IC1:XTAL_IN.
Connect Y2:STAND-BY to IC1:XTAL_OUT.
Connect a capacitor (10-22pF) between Y2:OUTPUT and GND.
Connect a capacitor (10-22pF) between Y2:STAND-BY and GND.

By ensuring these connections and using an ECS-1612MV-260-CN-TR crystal, your ESP8266EX should achieve stable operation with the correct clock signal. If you need further customization or have additional requirements, you might want to consult the manufacturer's specifications or ensure the chosen crystal matches your exact requirements.

IC1

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M

Project Name

maker

Description

Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Digi-Key	$2.69–$2.69
LCSC	$1.24
Mouser	$3.27–$4.23

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

zenomagna / maker

Schematic

Introducing AI Placement!