Circuit Tracker Optimization

Thought for 2 mins 10 sec

I can’t reposition components for you, but here’s the most relevant entry I found related to the topic. Quoting the instructions verbatim:

“## Positioning

To move a component, left-click on it and drag it to the desired position. For rotating a part, there are two options:

Right-click on the part you want to rotate and select "Rotate right" or "Rotate left."
To rotate parts quickly, use the open or close square brackets [ ]

Image

Note: you will see that moving or rotating a component creates an Object-Specific Layout Rules with the desired position or rotation. You can edit the rule directly instead of using the UI elements.”

Source: https://docs.flux.ai/flux/reference/reference-positioning-routing

Once you’ve spaced parts so nothing overlaps, tell me and I’ll pull a fresh review to confirm all DRC overlaps are cleared.

State key overlap spots

Align and space parts

Fix copper pour look

DRC next steps

Lock edge connectors

Resistance

1.2kΩ

CH340C

Resistance

10kΩ

Capacitance

0.1µF

Capacitance

100uF

Resistance

10 Ω

Resistance

5.1kΩ

Resistance

5.1kΩ

FB1

Resistance

22 Ω

J1 DN1 - J1 DN2

U5 GND - LED1 1

U6 ~RTS - Q2 B

U1 EN - Q3 C

R4 P2 - U6 UD+

U1 IO2 - R6 P1

C6 P1 - C7 P1

J3 I/O - U2 SIMD_DIO

J3 VCC - U2 VSIMD

U3 BAT - J2 PIN1

J3 GND_5 - C1 P2

U1 EN - Q3 C

U2 GPS_RF - J6 Center_Contact

R6 P2 - LED1 2

U1 IO4 - Q4 G

U1 EN - Q3 C

J1 VBUS__1 - D3 K

J3 GND_5 - C1 P2

U2 GPS_RF - J6 Center_Contact

C6 P2 - U2 GND

J1 DP1 - J1 DP2

U2 GPRS_RF - J4 Center_Contact

U3 PROG - R1 P1

U6 ~RTS - Q2 B

C6 P2 - U2 GND

U6 TXD - U1 RXD0/IO3

J1 DP1 - J1 DP2

U1 IO17 - U2 UART1_RXD

C6 P2 - U2 GND

C6 P1 - C7 P1

U1 IO17 - U2 UART1_RXD

U1 EN - Q3 C

U3 BAT - J2 PIN1

C6 P2 - U2 GND

U6 RXD - U1 TXD0/IO1

J3 I/O - U2 SIMD_DIO

U1 IO0 - Q2 C

J3 CLK - U2 SIMD_CLK

J3 GND_5 - C1 P2

U2 GPRS_RF - J4 Center_Contact

J3 GND_5 - C1 P2

J1 DN1 - J1 DN2

U6 ~DTR - Q3 B

U1 IO4 - Q4 G

U1 IO0 - Q2 C

C6 P2 - U2 GND

R6 P2 - LED1 2

J3 GND_5 - C1 P2

J1 VBUS__1 - D3 K

U3 ~{CHRG} - R9 P1

U6 V3 - C3 1

J1 CC2 - R3 P1

U1 IO0 - Q2 C

Q4 D - FB1 1

R5 P2 - U3 VCC

Q4 D - FB1 1

U1 EN - Q3 C

U5 VO - C9 P1

U5 VI - C8 P1

J3 GND_5 - C1 P2

J1 DP1 - J1 DP2

J1 CC2 - R3 P1

U3 EP - U2 EP1

R4 P2 - U6 UD+

R5 P2 - U3 VCC

SIM_CLK

SIM_IO

J3 I/O - U2 SIMD_DIO

U3 EP - U2 EP1

U5 GND - LED1 1

J3 GND_5 - C1 P2

J3 CLK - U2 SIMD_CLK

U1 IO2 - R6 P1

U1 IO0 - Q2 C

U3 PROG - R1 P1

J3 VCC - U2 VSIMD

J3 CLK - U2 SIMD_CLK

J3 VCC - U2 VSIMD

SIM_RST

U6 ~DTR - Q3 B

C6 P2 - U2 GND

J3 RST - U2 SIMD_RST

J1 CC1 - R2 P1

C6 P2 - U2 GND

U6 RXD - U1 TXD0/IO1

J3 RST - U2 SIMD_RST

J1 DN1 - J1 DN2

U1 IO16 - U2 UART1_TXD

C6 P2 - U2 GND

J1 VBUS__1 - D3 K

U3 ~{STDBY} - R10 P1

U3 BAT - J2 PIN1

U6 V3 - C3 1

J3 RST - U2 SIMD_RST

J3 VCC - U2 VSIMD

U3 BAT - J2 PIN1

U1 IO16 - U2 UART1_TXD

C6 P1 - C7 P1

J1 VBUS__1 - D3 K

U6 TXD - U1 RXD0/IO3

J1 DN1 - J1 DN2

J3 GND_5 - C1 P2

J1 DP1 - J1 DP2

J1 CC1 - R2 P1

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.2k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k

Project Name

Description

Credit Card GPS + GSM Tracker (ESP32 + A9G)

Properties

System Ar…itecture

Part Type

Pricing & Availability

Distributor	Qty 1
Arrow	$1.93–$4.64
Digi-Key	$13.74–$19.97
LCSC	$14.70–$20.78
Mouser	$11.30
TME	$9.26
Verical	$5.24–$99.41

Controls

New control

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.