Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part
Write a part description
Describe each pin
Verify Part Details
Recommend similar parts
Check availability & lifecycle
Sign up to send
explain this project.
nexus2301

nexus2301

@copilot explain this project.
2y

copilot

This project describes a circuit involving a QRE1113 opto-reflective sensor module commonly used for industrial sensing applications.
Here are the main components and characteristics
  • Opto-Reflective Sensor (IC1): It's the key element in the circuit, which is essentially a phototransistor paired with an infrared LED.
  • Resistors (R1 and R2): The project uses a 47KΩ (R2) pull-up resistor for the sensor output and a 100Ω (R1) resistor, most likely for current limiting.
  • Capacitor (C1): A 1µF capacitor aids in stability, likely smoothing out power supply noise and decoupling.
  • Power Supply (VCC): The power input to the circuit is designed to connect via a JST connector.
  • Output (OPTO_OUT): The processed signal is available at OPTO_OUT.
Under normal circumstances, the sensor's phototransistor allows current based on the amount of light it receives from its paired infrared LED. When an object is nearby, it reflects more light towards the phototransistor, resulting in more current being allowed.
Here's how these components are connected:
  1. Both R1 and R2 are connected to VCC on one side.
  2. The other pin of R1 is connected to one pin of the Opto-Reflective Sensor.
  3. The other pin on R2 is connected to another leg of the Opto-Reflective Sensor, and that point serves as the output (OPTO_OUT) of the circuit.
  4. OPTO_OUT is additionally connected to a capacitor, which is then grounded.
Please note that for the Opto-Reflective Sensor (IC1), the pin names have not been specified. Therefore, I'm assuming a standard configuration where the LED is powered through a current limiting resistor (R1) and the phototransistor is pulled up with R2 to create a digital output. Always refer to the specific datasheet for correct connection guidance.
This project further mentions a license link confirming it's made under the creative commons license and specifies that the components VCC, OPTO_OUT, GND are to be excluded from the Bill of Materials (BOM) and PCB.
2y
nexus2301

nexus2301

lo puedo utilixar para escanear codigo qr
2y

copilot

Aunque la QRE1113 es una gran opción para evaluar la distancia a los objetos a través de la reflectancia de infrarrojos, no es la opción ideal para la lectura de códigos QR. Leer un código QR requiere la capacidad de scanner e interpretar patrones visuales altamente detallados, algo que normalmente requeriría una cámara o un sensor de imagen para conseguirlo.
El QRE1113 es un sensor opto-reflectante que incluye un par de elementos: un LED emisor de infrarrojos y un fototransistor. El LED emite luz infrarroja y el fototransistor detecta la luz reflejada. Este sensado se usa típicamente para detectar proximidad o para diferenciar entre superficies claras y oscuras, por lo que no tiene la capacidad de leer códigos QR por sí mismo.
Si necesitas un método de escanear códigos QR, deberías considerar el uso de una cámara o un lector de códigos de barras 2D especializado, que puede capturar y procesar la imagen completa de un código QR.
2y
Someone is typing...
2
R2
Resistance
47KΩ
VCC
IC1
VCC
OUT
OPTO_OUT
C1
Capacitance
1uF
OPTO_OUT
VCC
VCC

No results...

Learn to Add a Component

QRE1113 Module

QRE1113 Module thumbnail
This is a QRE1113 opto-reflective sensor module, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #OpticalSensor #industrialSensing #reusable #module #industrialsensing #onsemi #sublayout

Properties

creativecommons.org/licenses/by/4.0/

M

Pricing & Availability

Distributor

Qty 1

Digi-Key

$0.37–$1.09

LCSC

$0.80

Mouser

$1.03

Controls