Schematic for TJA1059TKJ Reference Design: This is a reference...

Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project

Write a project description

Find schematic issues

Create a test plan

Ready.

Breakdown the circuit diagram into functional block.

ananttater

@copilot Breakdown the circuit diagram into functional block.

copilot

Sure! Let’s break down the TJA1059TKJ CAN transceiver reference design into its functional blocks:

1. Power Supply

VCC (P1): Main power supply for the transceiver, typically +5V.
VIO (P1): Logic voltage for the transceiver and MCU communication, typically +3.3V or +5V depending on the MCU.
GND (various): Common ground for the circuit.

2. Decoupling Capacitors

C1: 0.1µF capacitor for VCC decoupling.
C2: 0.1µF capacitor for VIO decoupling.
C3: 10µF bulk capacitor for VCC.
C10: 10µF bulk capacitor for VIO.

3. CAN Transceiver (TJA1059TKJ)

U1 (TJA1059TKJ): Dual high-speed CAN transceiver with standby mode.
- Pin 3: VCC
- Pin 11: VIO
- Pin 2, 5, 15: GND
- Pin 1, 4, 6, 7, 8, 9, 10, 12, 13, 14: Various CAN interface and control signals.

4. Microcontroller Interface

MCU1 and MCU2: Microcontroller interfaces for CAN1 and CAN2 respectively.
- MCU1 P3 -> U1 TXD1 (Pin 1): Transmit data for CAN1.
- MCU1 P4 -> U1 RXD1 (Pin 4): Receive data for CAN1.
- MCU1 P2 -> U1 STB1 (Pin 14): Standby control for CAN1.
- MCU2 P3 -> U1 TXD2 (Pin 6): Transmit data for CAN2.
- MCU2 P4 -> U1 RXD2 (Pin 7): Receive data for CAN2.
- MCU2 P2 -> U1 STB2 (Pin 8): Standby control for CAN2.

5. CAN Bus Connections

CANH1, CANL1: CAN high and low lines for CAN bus 1.
- U1 (Pin 12) CANL1: Low line CAN bus 1.
- U1 (Pin 13) CANH1: High line CAN bus 1.
CANH2, CANL2: CAN high and low lines for CAN bus 2.
- U1 (Pin 9) CANL2: Low line CAN bus 2.
- U1 (Pin 10) CANH2: High line CAN bus 2.

6. Bus Protection/Termination

TERM1: Termination for CAN bus 1.
- Resistor $R3$ : 30Ω between CANH1 and CANL1.
- Capacitor $C7$ : 68pF between CANL1 and GND.
- Diode $D2$ : NUP2105L for ESD protection.
TERM2: Termination for CAN bus 2.
- Resistor $R1$ : 30Ω between CANH2 and CANL2.
- Capacitor $C5$ : 68pF between CANH2 and GND.
- Diode $D1$ : NUP2105L for ESD protection.

7. General Capacitors

C6: 47nF capacitor.
C8: 47nF capacitor.
C4: 68pF capacitor.
C9: 68pF capacitor.

8. Connectors

CANBUS1: CAN bus connection for CAN bus 1.
CANBUS2: CAN bus connection for CAN bus 2.

9. Miscellaneous

R2, R3, R4: 30Ω resistors potentially for termination or filtering.
D1, D2 (NUP2105L): ESD protection diodes.

Key Interconnections

Connect U1:VCC to VCC:P1.
Connect U1:VIO to VIO:P1.
Connect U1:GNDA, GNDB, EPAD to GND.
Connect MCU1:4 to U1:RXD1.
Connect MCU1:3 to U1:TXD1.
Connect MCU1:2 to U1:STB1.
Connect MCU2:4 to U1:RXD2.
Connect MCU2:3 to U1:TXD2.
Connect MCU2:2 to U1:STB2.
Connect CANBUS1:P1 to CANH1:P1.
Connect CANBUS1:P2 to CANL1:P1.
Connect CANBUS2:P1 to CANH2:P1.
Connect CANBUS2:P2 to CANL2:P1.

Let me know if you need further details or modifications in the breakdown!

Someone is typing...

I need to break down into functional blocks and modularize. Please analyze the c...

ananttater

@copilot I need to break down into functional blocks and modularize. Please analyze the circuit diagram, identify the different functional parts and DO NOT ASSUME ANY PART/COMPONENT. Here is a list of common module names:

Power Supply Circuits
Amplifier Circuits
Oscillator Circuits
Filter Circuits
Signal Processing Circuits
Signal Conditioning Circuits
Modulation and Demodulation Circuits
Communication Circuits
Control Circuits
Sensor Interface Circuits
Protection Circuits

If you find a part relevent to a perticular module name then you use it otherwise you do not use it.

Create individual tables for each identified module with the following details:

Module Name
Components
Description of Functionality
Connections and Interactions with Other Modules
Recommendations : Functional Block Level Modularization according to relevant standards (e.g., ISO standards)

Please provide the response in a structured format.

copilot

Sure! Let's analyze the circuit and break it down into functional blocks based on the provided modules. I'll create individual tables for each identified module and fill in the required details.

Power Supply Circuits

Table: Power Supply Circuits

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules	Recommendations
Power Supply	- VCC- VIO- C1- C2- C3- C10	Provides the necessary operating voltage to the circuit components.	- Connects VCC to other modules U1: $VCC$ , MCU1: $5$ .- Connects VIO to U1: $VIO$ , MCU2: $5$ .- Capacitors C1, C2, C3, C10 are used for decoupling and stabilizing voltage supplies.	- Ensure compliance with power supply regulations like IEC 61000-4-8.- Modularize power supply for ease of maintenance and testing.

Signal Conditioning Circuits

Table: Signal Conditioning Circuits

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules	Recommendations
Signal Conditioning	- C4, C6, C8, C9- R1, R2, R3, R4	Filters signal to remove noise and ensure correct signal levels for CAN communication.	- Connects filters capacitors/resistors to CANH1, CANL1, CANH2, CANL2 respectively.- Interacts with CAN transceiver U1 by connecting to CANH/CANL pins.	- Follow standards such as ISO 7637-2 for signal conditioning.- Use modular connection headers for easy testing and replacement.

Communication Circuits

Table: Communication Circuits

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules	Recommendations
Communication Circuits	- U1- CAN_TX1, CAN_TX2, CAN_RX1, CAN_RX2 - CANBUS1, CANBUS2	Manages CAN communication for high-speed data transfer and CAN bus interactions.	- U1 handles the dual CAN transceiver functionality.- Connects to CAN_TX1, CAN_TX2, CAN_RX1, CAN_RX2 for transmitting and receiving CAN signals.- Interfaces with MCUs MCU1, MCU2.- Connects to CANBUS connectors for external CAN bus.	- Comply with ISO 11898-2 for high-speed CAN transceivers.- Modularize communication circuits for easy integration with other CAN devices.

Protection Circuits

Table: Protection Circuits

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules	Recommendations
Protection Circuits	- D1, D2	Protects the circuit from voltage spikes and ESD.	- D1 and D2 are ESD protection diodes protecting the CAN lines.- Connect D1/D2 anodes to ground and cathodes to CANH2/CANL2 and CANH1/CANL1 respectively.	- Follow IEC 61000-4-2 standard for ESD protection.- Ensure these components are easily replaceable.

Control Circuits

Table: Control Circuits

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules	Recommendations
Control Circuits	- STBY1, STBY2- MCU1- MCU2	Manages control signals for enabling/disabling parts of the circuit.	- STBY1 and STBY2 for standby control, connected to MCUs and U1 $STB1$ / $STB2$ .- MCU1 and MCU2 control $TXD$ / $RXD$ signals for CAN communication.	- Follow ISO/IEC 15408 standards for control circuit security.- Ensure modular control circuits for flexibility in upgrades and expansions.

Recommendations for Functional Block Level Modularization

Power Supply Circuits:
- Ensure compliance with IEC 61000-4-8 for power supply regulations.
- Modularize the power supply section to include headers for easy voltage monitoring and maintenance.
- Allocate space for additional power filtering or EMI reduction components if needed.
Signal Conditioning Circuits:
- Follow ISO 7637-2 standard for signal conditioning components.
- Modularize connections using headers or connectors to facilitate easy swapping and testing of filters or resistive elements.
Communication Circuits:
- Adhere to ISO 11898-2 for high-speed CAN communication interfaces.
- Design the communication circuits with modularity in mind to allow easy attachment or removal of CAN transceivers or connectors.
Protection Circuits:
- Follow IEC 61000-4-2 standard for ESD protection implementations.
- Make protection circuits modular with replaceable ESD protection diodes to ensure easy maintenance and reliability improvements over time.
Control Circuits:
- Comply with ISO/IEC 15408 for control circuits to enhance overall security measures.
- Design control circuits in a modular fashion for adaptability to different application requirements and future enhancements.

By following these suggestions, your TJA1059TKJ reference design will be compliant with relevant standards and modular for efficient maintenance and potential upgrades, making it versatile for automotive and industrial applications.

Someone is typing...

I need to break down this circuit diagram into functional blocks. Please analyze...

ananttater

@copilot I need to break down this circuit diagram into functional blocks. Please analyze the it, identify the different functional parts and DO NOT ASSUME ANY PART/COMPONENT. Here is a list of common module names:

Power Supply Functional Blocks
Amplifier Functional Blocks
Oscillator Functional Blocks
Filter Functional Blocks
Signal Processing Functional Blocks
Signal Conditioning Functional Blocks
Modulation and Demodulation Functional Blocks
Communication Functional Blocks
Control Functional Blocks
Sensor Interface Functional Blocks
Protection Functional Blocks

If you find a part relevent to a perticular module name then you use it otherwise you do not use it.

Create individual tables for each identified module with the following details:

Module Name
Components
Description of Functionality
Connections and Interactions with Other Modules

Please provide the response in a Table Format

copilot

Let's break down the circuit diagram from your project into the relevant functional blocks, based on the components and their roles. Here are the tables for each identified module:

Table 1: Power Supply Functional Blocks

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules
Power Supply	VCC, VIO, C1, C2, C3, C10	Supplies power to the circuit components	- VCC to U1:VCC, MCU1:5 - VIO to U1:VIO, MCU2:5 - C1, C2, C3, C10 are decoupling capacitors connected to VCC and VIO to stabilize voltage

Table 2: Communication Functional Blocks

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules
CAN Transceiver	$TJA1059TKJ$ (U1), CANBUS1, CANBUS2	Manages the communication between CAN nodes	- CANH1, CANH2, CANL1, CANL2 connected to CANBUS1, CANBUS2 - TXD1, TXD2, RXD1, RXD2 connected to MCU1 and MCU2 - STB1, STB2 connected to MCU1, MCU2 for standby control
Diodes for Protection	$NUP2105L$ (D1, D2)	Protects CAN transceiver from voltage spikes	- D1 connected to CANBUS2 - D2 connected to CANBUS1
Resistors for Termination	R1, R2, R3, R4	Ensures proper termination of the CAN bus	- R1, R2, R3, R4 are connected to respective CANH and CANL terminals

Table 3: Control Functional Blocks

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules
Standby Control	STBY1, STBY2	Allows enabling/disabling of standby mode	- STBY1 to MCU1:2 and U1:STB1 - STBY2 to MCU2:2 and U1:STB2

Table 4: Filter Functional Blocks

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules
Filtering and Decoupling	C7, C5, C9, C4, C8, C6	Filters and stabilizes the signals	- C4, C5, C6, C7, C8, and C9 are connected across various points in the circuit to filter noise and stabilize signals

Table 5: Protection Functional Blocks

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules
Diode Protection	$NUP2105L$ (D1, D2)	Protects the circuit from voltage spikes	- D1 connected across CANH2, CANL2, and GND - D2 connected across CANH1, CANL1, and GND

These tables provide a structured overview of the identified functional blocks in your circuit. If any additional details or further breakdowns are required, please let me know!

ananttater

Why there is no microcontroller functional block?

copilot

Let's update the table for the microcontroller components.

Table 6: Microcontroller (MCU) Functional Blocks

Module Name	Components	Description of Functionality	Connections and Interactions with Other Modules
Microcontroller Unit 1	MCU1	Manages communication via CAN1	- MCU1:2 to STBY1 (Standby control for CAN1) - MCU1:3 to CAN_TX1 (Transmitter for CAN1) - MCU1:4 to CAN_RX1 (Receiver for CAN1)
Microcontroller Unit 2	MCU2	Manages communication via CAN2	- MCU2:2 to STBY2 (Standby control for CAN2) - MCU2:3 to CAN_TX2 (Transmitter for CAN2) - MCU2:4 to CAN_RX2 (Receiver for CAN2)

With this addition, the microcontroller units are now properly identified as a distinct functional block in the circuit.

Please let me know if you need any further details or adjustments!

Someone is typing...

CANL1

CANH2

CANL2

CANH1

Reviews

Electrical Rule Checks

Missing Footprints

Reports components that need a footprint but don't have one.

Design Rule Checks

Overlapping Copper

Reports copper elements that are shorting.

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides • 20

	Designator	Ruleset
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊

Airwires

Reports missing routed traces between pads in a net.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper

Detect any via, trace or copper fill island that is not connected to any net.

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number • 18

	Designator	MPN
	C1	None
	C2	None
	C3	None
	C4	None
	C5	None
	C6	None
	C7	None
	C8	None
	C9	None
	C10	None
	CANBUS1	None
	CANBUS2	None
	MCU1	None
	MCU2	None
	R1	None
	R2	None
	R3	None
	R4	None

Parts Available

Beta

Checks that all components are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

TJA1059TKJ Reference Design

Controls

Properties

License

https://creativecommons.org/licenses/by/4.0/

Availability & Pricing

Distributor		Qty 1
	Digi-Key	$0.19–$0.90
	LCSC	$4.10–$4.25
	Mouser	$4.15

Assets

Thumbnail

TJA1059TKJ Reference Design-removebg-preview.png

id=TJA1059TKJ Reference Design-removebg-preview

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.