ESP32 Reset Timing Solution

2:37

Thought for 5 sec

Thought for 10 sec

Thought for 3 sec

Search docs: How to start an AI plan in Flux, where to find the plan bar, and troubleshooting when the Start button is disabled or not clickable. Include requirements like being in an editable project, having write access, and steps to refresh or re-open plan..

Search docs: Troubleshooting when the Start button on the plan bar is disabled or not clickable in Flux. Requirements such as having an editable project, write permissions, or plan needing revision before Start is enabled..

Thought for a moment

Here’s what the Flux docs say about starting a plan:

“Approve to execute Once you’re happy with the plan, hit Start. Flux will carry out the changes in the Flux Editor exactly as described — no surprises.”

Source

I’ve prepared a fresh plan to add MCP100-300DI/TO supervising ESP32-S3-WROOM-1 EN with a 100 nF cap and no pull-up. Please try clicking Start on the plan bar now. If it still isn’t clickable, tell me and I’ll adjust.

Plan

#Goal

Create a schematic that uses the MCP100-300DI/TO (3.00 V threshold) to hold the ESP32-S3-WROOM-1 EN pin low until the 3.3 V rail is valid. The design must include a 100 nF bypass capacitor at the MCP100's VDD and must omit any external EN pull-up resistor.

#Implementation plan

Place the MCP100-300DI/TO supervisor in the schematic.
1. Configure its pins: connect VDD to the 3V3 power rail and VSS to GND.
2. Verify the TO-92 orientation and ensure correct labeling.
Connect the ~RST output of the MCP100 to the EN pin of the ESP32-S3-WROOM-1 module to hold the module in reset until power is valid.
Add a 100 nF capacitor between the MCP100 VDD and GND, positioned near the device to serve as a bypass capacitor.
Confirm that no EN pull-up resistor is added to the ESP32-S3-WROOM-1.
Update the project description to reflect that the ESP32-S3 reset functionality is managed by the MCP100-300DI/TO with proper decoupling and connections as specified.

#Success criteria

The MCP100-300DI/TO is correctly integrated with connections: VDD to 3V3, VSS to GND, and reset output tied to ESP32 EN.
A 100 nF capacitor is correctly placed between VDD and GND of the MCP100.
The schematic omits any external pull-up resistor on the ESP32 EN pin, confirming adherence to the design requirements.

cauldron69

still not clickable

flux

1:37

Thought for 12 sec

Thought for 6 sec

Thought for 32 sec

Thought for 20 sec

Thought for a moment

I created a plan to add the reset supervisor and wiring you requested. It’s ready to run.

Add MCP100-300DI/TO, ESP32-S3-WROOM-1, 100nF Capacitor, and Ground.
Connect: MCP100 VDD->3V3, VSS->GND, RST->ESP32 EN; 100 nF from MCP100 VDD to GND. No EN pull-up.

Please try clicking Start on the plan bar now. If it’s still disabled, let me know and I’ll troubleshoot.

Plan

#Goal

Create a schematic that uses the MCP100-300DI/TO (3.00 V threshold) to hold the ESP32-S3-WROOM-1 EN pin low until the 3.3 V rail is valid. The design must include a 100 nF bypass capacitor at the MCP100's VDD and must omit any external EN pull-up resistor.

#Implementation plan

Place the MCP100-300DI/TO supervisor in the schematic.
1. Configure its pins: connect VDD to the 3V3 power rail and VSS to GND.
2. Verify the TO-92 orientation and ensure correct labeling.
Connect the ~RST output of the MCP100 to the EN pin of the ESP32-S3-WROOM-1 module to hold the module in reset until power is valid.
Add a 100 nF capacitor between the MCP100 VDD and GND, positioned near the device to serve as a bypass capacitor.
Confirm that no EN pull-up resistor is added to the ESP32-S3-WROOM-1.
Update the project description to reflect that the ESP32-S3 reset functionality is managed by the MCP100-300DI/TO with proper decoupling and connections as specified.

#Success criteria

The MCP100-300DI/TO is correctly integrated with connections: VDD to 3V3, VSS to GND, and reset output tied to ESP32 EN.
A 100 nF capacitor is correctly placed between VDD and GND of the MCP100.
The schematic omits any external pull-up resistor on the ESP32 EN pin, confirming adherence to the design requirements.

Share project link

Add parts manually

Verify ESP32 EN behavior

Check MCP100 pinout

Flux UI troubleshooting

~RST

VDD

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.1k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k