PCB Design Package Creation

flux

0:31

Reading docs about What export formats does Flux support for a finished PCB layout, including manufacturing outputs and 3D model exports?.

Exploring export formats.

Reading docs about List the supported export formats for PCB manufacturing, BOM, pick and place, and 3D model export in Flux..

Reading docs about Flux data portability export formats supported: Gerber, ODB++, IPC-2581C, BOM, pick-and-place, DXF, PDF, SVG, STEP, STL, VRML, GLB, BREP. What formats are supported for a finished PCB layout?.

This is the most relevant entry I found related to the topic:
Additional Manufacturing Files
Beyond Gerber files, you may need additional files for assembly:
  • Bill of Materials (BOM) - Component list with part numbers and quantities
  • Pick and Place files - Component coordinates for automated assembly
  • IPC-2581C or ODB++ - Modern comprehensive manufacturing formats
Comprehensive Export Guide
For complete information about all available export formats including netlists, 3D models, and project files, see the Data Portability reference.
Source
17 days
farouklazreg

farouklazreg

Where do I export these files in Flux?
17 days

flux

0:17

Finding export file answers.

Reading docs about Where do I export manufacturing files for a finished PCB layout in Flux? I need the UI location and basic steps for exporting Gerbers, BOM, pick and place, and 3D model files..

This is what the Flux documentation says about it:
How to Export:
  1. Click the Flux logo in the top-left corner
  2. Navigate to Export > Manufacturing Files (Gerbers, etc)
  3. The ZIP file will be downloaded automatically
Source
All export options are accessible through the Flux menu in the top-left corner of your workspace under the Export submenu.
Source
Generate Gerbers
Export BOM
Export pick and place
Export STEP model
17 days
Sign up to send
hi
2y

copilot

Hello! How can I assist you with your Flux project today?
2y
anu2206

anu2206

i want to conect 14 ESP-01 using LM2596
2y

copilot

To power 14 ESP-01 modules using a single LM2596 DC-DC converter, you need to ensure that the output voltage and the total current capacity of the LM2596 module are adequate.
  • The LM2596 DC-DC converter can output voltages ranging from 1.5 V to 35 V, which makes it capable of providing the 3.3V necessary for the ESP-01 modules.
  • The LM2596 is capable of sourcing a maximum current of 3A. Given that each ESP-01 can consume up to 170mA during transmission, you'll need to account for a total maximum current consumption of 14 ESP-01 * 170 mA/ESP-01 = 2.38 A. So, the LM2596 can theoretically power 14 ESP-01 modules, but it would be good to have a safety margin, so the actual number might be closer to 10-12.
Before proceeding, you'll need to set the output voltage on your LM2596 to 3.3V. With the ESP-01 modules all being identical, you can string them together in a parallel configuration, connecting each module's VCC and GND to the corresponding output pins on your LM2596. Here's how to connect it approximately in terms of components:
  • Connect the OUT + of the LM2596 module to each VCC pin on the 14 ESP-01s.
  • Connect the OUT - of the LM2596 module to each GND pin on the 14 ESP-01s.
Please verify your exact component's datasheet for confirmed pin names and specific connections. Also, it's worth mentioning your power source should provide more than 2.38A at the input voltage to account for both the maximum current draw and the conversion efficiency of the LM2596.
If the current consumption of your ESP-01 modules might happen to exceed the 3A limit during peak load conditions, it would be safer to add an additional LM2596 module or look for a DC-DC converter that can handle a larger current. Always confirm operation in a safe test environment before finalizing your design.
2y
Someone is typing...
4
explain this project.
11ishan

11ishan

@copilot explain this project.
1y

copilot

This project appears to be centered around the LM2596 Buck Converter, which is a high-efficiency DC-DC step-down (buck) voltage regulator. Here's a breakdown of the components and the setup:
LM2596 DC-DC Buck Converter
  • Functionality: The LM2596 is designed to convert a higher input voltage $3.0-40V$ to a lower output voltage $1.5-35V$. It is typically used in power supply applications where a stable and adjustable output voltage is required.
  • Adjustable Output: The output voltage is adjustable, meaning you can set it to the desired level within the specified range.
  • High Efficiency: This type of converter is known for its efficiency, making it suitable for applications where energy saving and heat dissipation are important.
Project Components
  • Input and Output Terminals:
    • IN +: This is the positive input terminal where you connect the higher input voltage.
    • OUT +: This is the positive output terminal where you will get the regulated, lower voltage output.
    • IN -: This is the negative input terminal, typically connected to the ground or a negative power rail.
    • OUT -: This is the negative output terminal, also for connection to ground or a negative power rail.
Connection Overview
  • There are four main terminals in this project: two for input (IN +, IN -) and two for output (OUT +, OUT -).
  • No electrical connections have been made yet, but a typical configuration might involve connecting a voltage source to IN + and IN - and retrieving the regulated output from OUT + and OUT -.
The project seems to be in its initial stages, where you need to make appropriate connections and potentially add components such as capacitors or heat sinks depending on the detailed application requirements and operating conditions. Let me know if you have any specific questions or need further assistance with connections!
1y
Someone is typing...
8
Provide complete schematic
adi9151

adi9151

@copilot Provide complete schematic
2y

copilot

To provide a complete schematic for your LM2596 DC-DC buck converter project based on the textual description, we'll outline a basic setup. This setup assumes you're using the LM2596 module to step down voltage from a higher voltage source to a lower voltage. Remember, ensure all components are compatible with your power and load requirements.
Components List
  • LM2596 Buck Converter Module (as described)
  • Input Power Source: Depending on your application, this might vary. For our example, we'll assume a 12V battery.
  • Load: To demonstrate, we'll use a generic load that requires 5V; for instance, a microcontroller or LED strip.
  • Capacitors: For input and output smoothing; typically, values might be 100μF for the input and 220μF for the output (but consult the LM2596 datasheet for your specific needs).
Schematic Connections
  1. Input Power Source to LM2596:
    • Connect the positive terminal of your 12V battery to IN+ (P:1).
    • Connect the negative terminal of your 12V battery to IN- (P:2).
  2. LM2596 Output to Load:
    • Connect OUT+ (P:4) to the positive input of your load. If your load is a microcontroller, this would typically connect to the VIN pin on the microcontroller.
    • Connect OUT- (P:3) to the ground of your load.
  3. Capacitors (for improved stability and smoothing):
    • Place a 100μF capacitor at the input side, connecting between IN+ (P:1) and IN- (P:2).
    • Place a 220μF capacitor at the output side, connecting between OUT+ (P:4) and OUT- (P:3).
Notes
  • The values and components described for capacitors are based on common practice and may need to be adjusted depending on the specifics of your load and source. Checking the LM2596 datasheet is recommended for optimal capacitor values.
  • The LM2596 module typically includes a potentiometer for adjusting the output voltage. Ensure to adjust this to your desired output voltage (in our case, 5V) before connecting your load.
  • If your project involves sensitive electronics or precision tasks, consider adding additional filtering on the output, like an LC filter, to further smooth out any remaining voltage ripple.
This basic schematic should guide you through setting up your LM2596 buck converter project in Flux. Remember, the exact connections might vary slightly based on your specific module and other components in your project, so it's always good to verify with the component datasheets.
2y
Someone is typing...
7
please explain what IN + does.
alonigrin

alonigrin

@copilot please explain what IN + does.
2y

copilot

Sure, in the context of your LM2596 DC-DC buck converter, "IN+" designates the positive terminal of the input voltage. You connect the positive end of the power supply that you want to step down to the "IN+" terminal. The LM2596 converter will take this input voltage (which can range from 3.0-40V) and, after conversion, will output a lower voltage at the "OUT+" terminal. The actual output voltage can be adjusted anywhere between 1.5-35V depending on your specific design needs.
2y
Someone is typing...
5
explain this project.
diegolop

diegolop

@copilot explain this project.
2y

copilot

Sure, I'll break it down for you. This project is centered around the LM2596 Buck Converter module, which is a type of DC to DC Converter. This particular component is designed to efficiently reduce a DC input voltage between 3.0V and 40V down to a lower adjustable DC output voltage between 1.5V and 35V. Here are some key points about the project:
  • The LM2596 is the main component.
  • The project has four designators: IN+, IN-, OUT+, and OUT-. Each designator corresponds to a terminal of the buck converter circuit.
  • IN+ and IN- are the designators for the DC input terminals (positive and negative respectively).
  • OUT+ and OUT- are the designators for the DC output terminals (positive and negative respectively).
  • Up to this point, there are no electrical connections made in the project yet.
Please note that the specifics of how to use this module and connect it to other parts of your circuit will depend on your project's specific requirements. Be sure to adjust the output voltage to the level required for your downstream components before connecting them.
2y
hansmeier

hansmeier

How much current can it handle?
1y

copilot

The LM2596LM2596 DC-DC buck converter is capable of handling up to 3A of output current. Here are some more detailed specifications related to its current handling capability:
  • Maximum Input Current: Typically, the input current capability of the power source should be higher than the output current to account for efficiency losses.
  • Output Current: The LM2596LM2596 can provide a maximum output current of 3A.
  • Efficiency: The efficiency of the LM2596LM2596 can be quite high (up to about 90%), which means that the current draw from the input will be slightly higher than the output current due to energy conversion losses.
If you have any specific current requirements or additional questions about your circuit design, feel free to ask!
1y
Someone is typing...
3
IN +
OUT +
IN -
OUT -
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    15.8k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M

LM2596 DC-DC buck converter

LM2596 DC-DC buck converter thumbnail
LM2596 Buck Converter DC to DC Converter High Efficiency Voltage Regulator 3.0-40V to 1.5-35V Buck Converter Adjustable Power Supply Module #part #LM2596

Properties

Integrated Circuit

PS

creativecommons.org/licenses/by/4.0/

Pricing & Availability

Distributor

Qty 1

Controls