Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project
Write a project description
Find schematic issues
Create a test plan
Simulate a circuit
Prepare for Manufacturing
Component Selection Workflow
New Subsystem Wizard

Ready.

Sign up to send
would you be able to come up with simulation code based on a datasheet
turbos

turbos

@copilot would you be able to come up with simulation code based on a datasheet
1y

copilot

I'd be glad to help with creating simulation code based on a datasheet, but to provide the most accurate advice, I need to know several details:
  1. The specific component or circuit you're looking to simulate. For instance, are you interested in simulating the operational characteristics of a microcontroller like the PIC24FJ64GA002-I/SO, an operational amplifier such as the LM741, or maybe the noise characteristics of a BJT like the BC182LB?
  2. The simulation environment you plan to use. Different environments like SPICE, MATLAB/Simulink, or a specific tool like LTspice or Multisim have different coding or scripting methodologies.
  3. The target of the simulation. Are you looking to observe the output waveforms, analyze the frequency response, power consumption, thermal characteristics, or something else?
For example, if you're simulating an LM741 operational amplifier in a SPICE environment and looking to observe the output waveform of a simple amplifier circuit, a basic SPICE code snippet could look something like this:
Plaintext
* LM741 Operational Amplifier Example Circuit
VIN 1 0 DC 1.0 AC 1.0V
R1 1 2 1k
R2 2 0 10k
XOP 3 2 0 LM741
RLOAD 3 0 10k
.model LM741 OPAMP (LEVEL=1 FREQ=10MEG)
.lib LM741.lib
.end
In this example:
  • VIN is the input voltage source.
  • R1 and R2 form a feedback network around the operational amplifier.
  • XOP represents the LM741 Op-Amp where pin 3 is the output, pin 2 is the inverting input, and pin 1 is the non-inverting input which in this case is grounded.
  • RLOAD is the load resistor on the output.
  • .model and .lib directives are placeholders for linking to the specific model or library file for the LM741. These would be replaced by actual paths or references depending on how the LM741 is modeled in your SPICE library.
Keep in mind that without the specific component or simulation details, this example might not exactly fit your needs. If you have more detailed information or another component in mind, feel free to share, and I'll tailor the advice more closely to your project's requirements.
1y
turbos

turbos

I want to create simulation code for LT1028
1y

copilot

Creating a simulation model for the LT1028 ultra-low noise precision high-speed operational amplifier involves defining its electrical characteristics in a manner that a SPICE-based simulation environment can recognize. Given the LT1028's notable features—such as its ultra-low noise and very high gain-bandwidth product—it's essential to accurately represent these in the simulation model for meaningful results.
Unfortunately, as I can't directly access real-time databases or specific vendor-supplied models, I'll outline a general approach to creating a simulation code based on the typical characteristics of the LT1028, which are found in its datasheet. Most SPICE simulation environments allow you to define a subcircuit (.subckt) to model complex components such as operational amplifiers.
Starting Point
  1. First, check the manufacturer's website or trusted component libraries for a pre-existing SPICE model of the LT1028. Analog Devices, for example, often provides models for their components.
  2. If a pre-built model is not available or if you're looking to understand how to build one from scratch, you'll focus on key parameters:
    • Open-loop gain
    • Bandwidth
    • Noise characteristics
    • Input and output impedance
Generic SPICE Model Template for an Op-Amp
Below is a highly simplified SPICE subcircuit model example that you might use as a starting point, substituting in values specific to the LT1028 where possible:
Plaintext
* LT1028 Ultra-Low Noise Op-Amp Subcircuit Model
.subckt LT1028 NonInvInput InvInput Vout Vplus Vminus
* Pin order: Non-inverting input, Inverting input, Output, Positive supply, Negative supply

Rin  NonInvInput InvInput 100e3
* Input resistance simplified, real value might be different

Egain NonInvOutput 0 NonInvInput InvInput 100e4
* Ideal voltage-controlled voltage source (VCVS) for gain
* The LT1028 has a very high open-loop gain, here simplified

Rout NonInvOutput Vout 50
* Simplifies output resistance, LT1028 might differ

Cdom Vout InvInput 1.5pF
* Compensating for dominant pole, adjust value based on real bandwidth

* Power supplies connection (not modeling quiescent current effects)
Dpwr Vplus 0 Dmodel
Dpwr 0 Vminus Dmodel

.model Dmodel D(Is=1e-32)
.ends LT1028
This code skeleton models:
  • Input impedance through Rin.
  • Open-loop gain with the controlled source Egain.
  • Output resistance with Rout.
  • Dominant pole compensation for bandwidth limitation through Cdom.
  • Simplistic power supply connections with diodes to complete the circuit without concretely simulating supply behavior.
Refinements
To accurately simulate the LT1028, you'll need to refine these elements significantly, especially:
  • Open-loop gain and frequency response: These can be represented more complexly by including multiple poles and zeros to the Egain part of the circuit or using more advanced controlled source models.
  • Noise performance: Incorporating noise generators in your model to simulate the ultra-low noise performance of the LT1028 can be complex, as it might require custom noise sources that accurately reflect the noise characteristics given in the datasheet.
Conclusion
This example serves as a foundation. Given the complex nature of accurately modeling specific behaviors like noise, it's often more practical to use a manufacturer-supplied model. Always validate any homegrown model against known performance metrics and application notes provided by the manufacturer. For detailed simulation involving specific applications (e.g., ultra-low noise amplification stages), reviewing application circuits and guidelines provided by Analog Devices would also be beneficial.
1y
5
https://cdn2.flux.ai/flux-comment-files/files/commentFileId-6bfff4fed5449354d513...
turbos

turbos

@copilot what's a good board size for my design consideirng the components I have
1y

copilot

Determining an optimal PCB (Printed Circuit Board) size for your design involves considering several factors, such as the size and number of your components, required spacing between them (for both electrical and thermal reasons), any mechanical constraints (like casing), and potential future expansions or modifications. Given the components listed in your project description, here's a basic approach to estimate a good starting point for your board size:
  1. Component Footprint: Adding up the space taken by your components, keeping in mind packages like SMD_0603 for resistors and capacitors are quite small (about 1.6mm x 0.8mm), while ICs like the PIC24FJ64GA002-I/SO and LM741 in a SO package will require more space. Your passive components (resistors, capacitors) and the two ICs (PIC24 and LM741) are relatively compact but remember to account for their electrical and thermal clearance.
  2. Connectors and External Interfaces: Larger components like connectors (e.g., J1, J2, J3, J4) might take up more space, not just for their footprint but also for ease of access. Including space around connectors is important for pluggable interfaces.
  3. Routing Space: Ensuring there's enough space for routing traces between components is crucial, especially for analog signals where you want to minimize interference. For a mixed-signal board like this, keeping analog and digital sections separate and ensuring sufficient ground planes might require additional space.
  4. Power Supply and Grounding: Adequate space for power supply components, decoupling capacitors close to IC pins, and grounding considerations (ground planes or traces) is essential for stable operation.
  5. Future Expansion: If you plan to add more components in the future, considering some extra space might be helpful.
Given the mix of several resistors, capacitors, a microcontroller (PIC24), a couple of LM741 operational amplifiers, and interface connectors, a starting PCB size of around 100mm x 80mm could work for your design. This size should give you adequate space for layout while keeping the design compact. However, it’s a rough estimate:
  • Component Layout: Briefly lay out your components in a CAD tool like Flux.ai (roughly, without routing) to see how much space they occupy.
  • Spacing and Routing: Add extra space for routing and spacing between components, considering analog signal integrity.
  • Review and Adjust: It might take a couple of iterations to optimize the board size based on the actual layout and routing complexity.
It’s important to use a CAD tool like Flux.ai to place your components and start routing them to get a more accurate idea of the space requirements before finalizing the board size.
1y
turbos

turbos

@copilot does the button switch need to stay pushed to have a closed circuit
1y

copilot

The description you provided does not explicitly mention a button switch in the project components or the manner in which it is expected to interact with the circuit. However, in general, button switches come in various types, with the two most common being:
  • Momentary Switches: These switches only maintain their electrical connection (closed circuit) while being pressed. Once you release the pressure, the switch returns to its default position, breaking the circuit (open circuit).
  • Latching Switches: With a latching switch, pressing the button changes its state from open to closed or vice versa, and the switch stays in this new state until it is pressed again.
Based on your question, it sounds like you're asking about a momentary switch, which indeed needs to stay pushed to keep the circuit closed. If you need a switch to maintain its state without continuous pressure, a latching switch would be the appropriate choice.
For incorporating a switch into your schematic within Flux, consider how you intend for the switch to modify the circuit behavior—whether it's to initiate a process, act as a reset, or control power—and choose the type that aligns with your functional requirements.
1y

copilot

Based on your preference for a latching switch, it implies that you require a switch that maintains its state (either open or closed) after being actuated until it is pressed again. This is well-suited for applications where a continuous action or state needs to be maintained without the need for constant manual pressure on the switch.
Latching switches are often used in situations where you want to toggle power or modes on and off without holding the switch down. For example, they are used in power buttons on many electronic devices, allowing users to switch the power state with a single press.
Given the components and circuits described in your project, if you wish to incorporate a latching switch, it could serve various purposes, such as enabling or disabling the noise circuit, toggling the microcontroller's power, or acting as a control input for signal processing tasks.
Assuming you want to add a latching switch into your existing schematic for toggling power or a similar function, here's a general guide on how to integrate it with the provided components using Flux:
  1. Determine the switch's function:
    • If it's for power toggling, you'll likely connect it to the power supply lines (+5V/GND).
    • If it's for control, determine which part of the circuit it will interact with.
  2. Select the appropriate connection points. For a simple example, toggling the power to your noise circuit or microcontroller setup:
    • Pin 1 of the switch (SWx:1): Connect this to the +5V (or another designated control voltage).
    • Pin 2 of the switch (SWx:2): Connect this to the component or net needing control. For a power toggle example, it could be the V+ pin of U1 or U2 for turning noise addition on/off.
Here's how you might format these connections:
  • Connect +5V:P1 to SWx:1.
  • For noise circuit power toggle: Connect SWx:2 to U1:V+, U2:V+.
  • For microcontroller power control: Connect SWx:2 to IC1:VDD.
Keep in mind the actual implementation and component choice (e.g., designator SWx) might vary based on your specific circuit needs and switch specifications. Also, ensure that the switch you choose can handle the voltage and current requirements of the circuit it controls.
If you have more specific functionality in mind for the latching switch or need further guidance on integrating it with your project, please provide additional details regarding its intended role.
1y
turbos

turbos

I need a latching switch in this context
1y
turbos

turbos

@copilot what is a simple switch I could use
1y

copilot

For a simple, effective switch that can be integrated into your project for controlling power or toggling between different states of a circuit, I recommend considering a tactile pushbutton switch. These switches are popular due to their compact size, ease of use, and straightforward implementation in both breadboard prototypes and final PCB designs.
Here's a brief overview of why a tactile pushbutton might be a suitable choice:
  • Ease of Use: Tactile feedback lets the user know the switch has been successfully activated.
  • Versatility: Available in normally open (NO) configurations that close the circuit when pressed, making them perfect for momentary action tasks.
  • Size and Availability: Common sizes like 6mm x 6mm are compact and widely available, fitting easily on a PCB designed in Flux.
  • Compatibility: They are compatible with a wide range of signal voltages (often from 3.3V to 12V or more) which should match the logic levels in your project.
  • Durability: Rated for thousands to millions of cycles, depending on the model.
For your circuit in Flux, you might use a tactile switch to enable or disable the noise addition from your dithering circuit, or to reset your PIC24 microcontroller.
In the schematic, you would typically:
  • Connect one pin of the switch to a digital input pin on the microcontroller, such as IC1:2 (AN0/VREF+/CN2/RA0) for a reset function or any other suitable pin for enabling/disabling functionality.
  • Connect the other pin of the switch to the ground (GND).
Please ensure to enable pull-up resistors internally in the PIC24 for the input pin or add an external pull-up resistor to ensure a defined logic level when the switch is not pressed.
This is a general suggestion; if your application has specific requirements, such as needing a switch to handle high current or specific environmental conditions, please provide more details so I can tailor the recommendation further.
1y

copilot

Yes, you can use the same noise signal for several ADC pins, especially in applications where dithering is applied to enhance the resolution of digital conversion in systems with multiple channels. This technique can help in improving the effective number of bits (ENOB) of the ADC by spreading the quantization noise over a wider frequency band.
When applying the same noise signal to several ADC inputs, consider the following points:
  1. Noise Characteristics: Ensure the noise signal has the desired characteristics (such as being white noise) and is uncorrelated to the signal being measured to avoid biasing the measurements.
  2. Signal Integrity: Sharing the noise signal across multiple inputs may introduce a point of coupling between the ADC channels. It's essential to ensure that this shared connection does not degrade the noise signal or introduce unwanted interaction between channels.
  3. Impedance Matching: To maintain the integrity of the noise signal, consider the impedance of the circuit path and the input impedance of the ADC pins. Matching these impedances can help in minimizing signal reflection and attenuation.
  4. Isolation: If isolation between ADC channels is critical, you might need to use buffers or operational amplifiers to isolate the noise signal's impact on each channel, thus preserving the independence of each measurement.
Given your project setup with a PIC24 microcontroller and assuming you're using its ADC channels, here's a schematic example:
  • You could connect the noise_output (Net: noise_output:P1) to several ADC input pins on the PIC24, such as IC1:2 (AN0/VREF+/CN2/RA0), IC1:3 (AN1/VREF-/CN3/RA1) etc., depending on how many channels you wish to apply the noise signal to.
  • If isolation is needed, consider using an operational amplifier in a voltage follower configuration for each ADC input you intend to dither.
A simple approach without additional amplification would be:
  • Connect noise_output:P1 directly to the desired ADC pins such as IC1:2 and IC1:3.
However, always make sure that the impedance of the noise source and the input impedance of the ADC pins are compatible, and that introducing such a noise source does not exceed the ADC input's voltage range specification. Also, evaluate the potential for cross-talk between channels and whether it impacts your application. If yes, buffering or isolation through amplifiers may be necessary.
1y
turbos

turbos

do you think I can use the same noise signal for several adc pin
1y

copilot

Given your project involves a PIC24 microcontroller (Designator: IC1, MPN: PIC24FJ64GA002-I/SO), for analog-to-digital conversion (ADC) purposes, choosing the right pins depends on your project's specific requirements, such as the number of ADC channels needed and whether any special functions (e.g., VREF+/VREF-) are required.
Considering the PIC24FJ64GA002-I/SO's datasheet (assuming typical application and priorities allowing for any ADC pin to be selected), here are three pins that are appropriate for ADC inputs:
  1. Pin 2 (AN0/VREF+/CN2/RA0): This pin can be used as a general-purpose ADC input. It's also capable of being used as a reference voltage input (VREF+), but if you're using it as an ADC channel, you'll likely configure it for general ADC input.
  2. Pin 3 (AN1/VREF-/CN3/RA1): Similar to Pin 2, this can be a general ADC input and is also configurable as a VREF- input. It gives you the flexibility to use it for normal ADC applications or as part of a differential ADC setup if your application requires it.
  3. Pin 4 (PGED1/AN2/C2IN-/RP0/CN4/RB0): Apart from its functions related to in-circuit debugging and programming (PGED1), this pin serves as an ADC input (AN2). It allows you to read analog values like the previous two pins.
Using these three pins, you can set up three ADC channels for your PIC24. Connecting the ADC inputs properly requires attention to the signal's integrity and ensuring that any external signal is within the ADC input range specified for the PIC24.
It's also worth noting that these pins can serve other functions, so configuring them for ADC use will require setting the appropriate registers in software, ensuring that there's no conflict with other peripherals or functions you might be using.
Here's how you might connect an external analog signal to these ADC pins:
  • Connect your analog signal source to IC1:2 (AN0/VREF+/CN2/RA0).
  • Connect another analog signal to IC1:3 (AN1/VREF-/CN3/RA1).
  • Connect a third analog signal to IC1:4 (PGED1/AN2/C2IN-/RP0/CN4/RB0).
Remember, the analog signals connected to these pins need to be within the PIC24's specified input voltage range for ADC conversion, typically 0V to VDD. Ensure you've configured these pins for analog input in your microcontroller's software setup, disabling digital input functions to reduce power consumption and noise.
1y
turbos

turbos

I need 3 ADC pins which pins would be the most appropriate
1y
1y
1
bjt_noise
R10
Resistance
1M Ω
-5V
ADC2
ADC1
RA3
NO2
NO3
RB6
DISVREG
RA0
bjt_noise
RA0
nMcr
NO1
R12
Resistance
560k Ω
R3
Resistance
500 Ω
DISVREG
ADC1
+5V
C2
Capacitance
100n F
+5V
RB3
RB5
ADC1
ADC2
C5
Capacitance
100n F
C12
Capacitance
47u F
R8
Resistance
10k Ω
Net1
RA2
C4
Capacitance
100n F
R4
Resistance
1M Ω
ADC2
+5V
+5V
-5V
C3
Capacitance
1n F
ANin2
SDA1
SW1
C10
Capacitance
100n F
RA1
RA1
ADC3
RB13
RB10
RA4
J3
RB13
C9
Capacitance
1n F
-5V
ANin3
C1
Capacitance
Capacitance
SDA1
R11
Resistance
10k Ω
C13
Capacitance
100n F
+5V
C6
Capacitance
1n F
OLED1
R2
Resistance
1M Ω
R7
Resistance
1M Ω
RB5
RB12
J2
C11
Capacitance
100n F
-5V
RA4
RA2
RB4
C7
Capacitance
100n F
RB11
3.3V
3.3V
R5
Resistance
1M Ω
RB3
+5V
J1
RB7
U2
nMcr
RB12
VCAP
NO3
R9
Resistance
20k Ω
RB15
NO2
VR1
Resistance
5k Ω
ANin1
R6
Resistance
50k Ω
NO1
RB10
SCL1
RB6
C8
Capacitance
47u F
U3
RB4
SCL1
RA3
RB15
U1
RB14
Q1
nMCR
VCAP
ADC3
+5V
RB11
RB7
IC1
ADC3
R1
Resistance
1M Ω
GND
SCL1
RB14
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.5k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M
Adding uncorrelated (i.e. white) noise to an analog signal prior to digitization. It has 2 noise circuits and the adc circuit with a pic24 microcontroller

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Digi-Key

$8.03–$16.63

LCSC

$56.55

Mouser

$19.29

Assets

reshot-icon-logout-XEWRNPF3Q9.svg

reshot-icon-logout-XEWRNPF3Q9.svg

reshot-icon-logout-XEWRNPF3Q9Default

Controls