Pet Health Collar PCB

Created 2 project docs

Project Specification — Pet Health Tracking Collar

View Document
Status: Draft — schematic architecture in progress. Compact collar-mounted electronics for continuous pet activity and cardiac monitoring wi...

Power Budget and Architecture Notes

View Document
The BG95 cellular transmit burst dominates electrical sizing. The protected single-cell LiPo path is therefore treated as a high-current rai...
Created 2 components
nRF52832-QFAA
Nordic Semiconductor multiprotocol Bluetooth Low Energy SoC, 512 kB flash / 64 kB RAM, 1.7–3.6 V, QFN-48 6×6 mm with exposed ground pad.
MAXM86161EFD+
Analog Devices single-supply integrated optical module for heart-rate and SpO2 measurement with green, red and IR LEDs, photodiode, I2C, 14-pin OLGA 2.9×4.3 mm.

flux

Assigned scope status: Failed — partial build only Completed
  • Read and applied the existing Project Specification and Power Budget.
  • Researched exact parts and official datasheets.
  • Added 12 production parts:
    • BQ24074RGTT charger/power-path manager
    • TPS79318-EP 1.8 V, 200 mA low-noise LDO
    • TPS22995RZGR 3.8 A, 18 mΩ BG95 load switch
    • MAX30003CTI+ ECG AFE
    • LSM6DSV16XTR IMU
    • BG95M3LA-64-SGNS LTE-M/NB-IoT/GNSS module
    • USB4215-03-A USB-C receptacle
    • 2452796-1 TE nano-SIM socket
    • Two RECE.20279.001E.01 Taoglas U.FL connectors
    • 2450AT42A0100001E Johanson BLE chip antenna
    • USBLC6-2SC6 ESD array
  • Created datasheet-backed component projects for:
    • nRF52832-QFAA, QFN-48 with exposed pad
    • MAXM86161EFD+, 14-pin OLGA
  • Verified key reference requirements, including:
    • BQ24074 NTC and programming network
    • TPS79318 capacitor requirements
    • TPS22995 3.8 A rating and 18 mΩ typical resistance
    • MAX30003 reference capacitors and 1 kΩ electrode protection
    • BG95 VBAT, SIM, RF, control, and unused-pin requirements
    • nRF52832 QFN pinout and Nordic reference BOM
    • MAXM86161 pinout and decoupling
Failed / blocked
  • The newly created nRF52832 and MAXM86161 parts were not immediately discoverable through the library index, so they could not be instantiated in the current schematic.
  • Consequently, support passives, connectors, GPIO allocation, full wiring, no-connect annotations, and schematic organization were not completed.
  • The requested ≥2 A battery connector was not available as a suitable documented library part.
  • Current ERC reports 226 unresolved checks, primarily floating pins. The schematic is not production-ready and should not proceed to PCB layout.
Verification evidence
  • BOM currently contains 11 unique real manufacturer parts / 12 instances.
  • Datasheets were consulted for every active IC added.
  • ERC confirms the partial schematic remains unwired; no claim of completion is made.The primary parts are placed, but two newly created datasheet-backed parts have not indexed yet, leaving the schematic unwired. I’m retrying those exact parts and completing the wiring before running ERC.

flux

Created the project architecture, power budget, and a partial production-intent BOM. The schematic currently has 12 components but no wiring, so it is not ready for layout.
Open items
  • Add the indexed nRF52832 and MAXM86161 parts.
  • Add support passives, connectors, battery protection, clocks, and test points.
  • Wire all power and interfaces; resolve 212 ERC findings.
  • Complete schematic verification, PCB placement, RF/ECG isolation, routing, and DRC.
  • Execution stopped because the account has no available ACUs.
Project files:
After ACUs are available, the priority is to finish and verify the schematic before proceeding to PCB layout.
Finish schematic
Add missing parts
Review ERC findings
Update project docs
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.5k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

Pet Health Tracking Collar

Pet Health Tracking Collar thumbnail
Compact LiPo-powered pet collar health tracker using nRF52832 BLE, ECG, optical PPG, 6-axis motion sensing, and Quectel BG95 cellular/GNSS connectivity.

Properties

Cellular

Battery

Consumer Electronics

ECG, PPG, IMU, LTE-M/NB-IoT, GNSS

Pricing & Availability

Distributor

Qty 1

Arrow

$35.74–$44.61

Digi-Key

$0.30

HQonline

$4.97–$5.07

LCSC

$34.39–$34.52

Mouser

$59.11

TME

$5.73

Verical

$51.96–$55.13

Controls