Custom Donut PCB Design

No changes applied.

0:17

adding missing support components and finishing wiring...

4:35

Searching for components.

Finished searching for components.

Searching for a component.

Creating search plan for: "Find a compact surface-mount active buzzer suitable for a 5V USB-powered ESP32-C6 product. Prefer a 2-pin or simple self-driven buzzer that can be switched by an NPN transistor from a 5V or 3.3V rail, low to moderate current, compact footprint for a small consumer PCB, and common sourcing availability. --- MANDATORY search constraints (these MUST be applied to all searches): fieldCategories: ["core","type","manufacturer","specifications","availability","packaging"] hitsPerPage: 10"

Searching: "Compact 2-pin self-driven surface-mount buzzer for 5V USB-powered ESP32 product; switchable by an NPN transistor from 5V or 3.3V; low-to-moderate current (typical <50mA); small footprint for consumer PCB; common manufacturers (Murata, CUI, TDK), prefer widely available part"

Searching: "Find a compact surface-mount active buzzer suitable for a 5V USB-powered ESP32-C6 product. Prefer a 2-pin or simple self-driven buzzer that can be switched by an NPN transistor from a 5V or 3.3V rail, low to moderate current, compact footprint for a small consumer PCB, and common sourcing availability. --- MANDATORY search constraints (these MUST be applied to all searches): fieldCategories: ["core","type","manufacturer","specifications","availability","packaging"] hitsPerPage: 10"

Finished searching for a component.

flux

0:41

I kept the ESP32-C6 native USB path instead of adding a USB-UART bridge, because ESP32-C6 already exposes native USB D+ and D-. I’m finishing the board around that choice with the fallback UART header retained for recovery and debug.

Added 10 components (2 designators reassigned)

0:53

Added 1x LED 0603 (1608 Metric) as D161 (Pins: K, A)

Added 1x CMI-8536-82-SMT-TR as BZ1 (Pins: CONTROL, +, -, OUT_PAD)

Added 1x PRTR5V0U2X,215 as D162 (Pins: I/O1, VCC, I/O2, GND)

Added 5x Generic Resistor as R15, R16, R17, R18, R19 (Pins: P2, P1)

Added 2x Generic Capacitor as C177, C178 (Pins: P1, P2)

⚠️ Requested designator C161 was unavailable, assigned C177 instead

⚠️ Requested designator C162 was unavailable, assigned C178 instead

Updating connections...

47d 2:38:56

Working...

47d 2:38:54

Started: wiring added support parts into final nets

tds99

Continue. Finish updating all connections and complete the schematic wiring.

flux

6:01

Checking if I can make the changes for you.

Considering known pins.

Considering design connections.

Net Connections to be added

Net	Connections
VBUS_PROTECTED	U7:VIN, C87:P1, C91:P1, R11:P1, TP9:1
3V3	U7:VOUT, U7:TAB(VOUT), U6:3V3, U8:VSUP, U8:DVDD, C84:P1, C85:P1, C86:P1, C90:P1, C92:P1, C93:P1, R9:P1, R14:P1, J4:Pin_4, TP10:1
USB_CC1	J3:CC1, R12:P1
USB_CC2	J3:CC2, R13:P1
USB_DP	J3:DP1, J3:DP2
USB_DN	J3:DN1, J3:DN2
LED_DATA	U6:IO3, R8:P1, TP12:1
LED_DIN_1	R8:P2, D1:DIN
HX711_DOUT	U6:IO6, U8:DOUT, TP13:1
HX711_SCK	U6:IO7, U8:PD_SCK, TP14:1
BUTTON_GPIO4	U6:IO4, R9:P2, SW1:P1
UART_TX	U6:TXD0, J4:Pin_1
UART_RX	U6:RXD0, J4:Pin_2

Net Connections to be removed

Net	Connections
3V3	U6:IO18, R10:P1
VBUS_PROTECTED	R10:P2

Stopped due to a problem. Please try again.

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.9k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M

Project Name

Description

MagicGlow smart key tray annular PCB with dual WS2812B rings, ESP32-C6 control, HX711 load-cell interface, USB-C power/UART access, buzzer, and button.

Properties

Manufact… Target

System Architecture

Diagram

Board Shape

Board Thickness

Compliance

Pricing & Availability

Distributor	Qty 1
Arrow	$7.44–$145.29
Digi-Key	$14.70–$382.52
LCSC	$33.17–$34.51
Mouser	$27.35–$35.56
TME	$17.01
Verical	$9.68–$64.47

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.