Schematic for [Example] LED Simulator Template: Simulator template...

Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project

Write a project description

Find schematic issues

Create a test plan

Ready.

create a detailed step by step plan table for this project to verify its functio...

syug

@copilot create a detailed step by step plan table for this project to verify its functionality.

copilot

Certainly! Below is a detailed step-by-step plan to verify the functionality of the current project. Each step focuses on testing different components and connections to ensure everything is working correctly:

Table

Step	Description	Action	Expected Outcome
1	Verify Power Connections	Check connections from power source $J1$ :(P1) to the rest of the circuit, including polarity.	Ensure correct voltage is applied with correct polarity to prevent damage.
2	Test Resistors	Measure resistance of $R1$ and $R2$ using a multimeter.	$R1$ should be 330kΩ and $R2$ should be 10kΩ.
3	Check Capacitor	Measure capacitance of $C1$ using a multimeter.	$C1$ should be 100nF.
4	Inspect Transistor Configurations	Confirm correct placement and orientation of transistors $Q1$ and $Q2$ .	$Q1$ and $Q2$ should be positioned correctly per pin configuration.
5	Test Speaker Connection	Verify connections for $SPK1$ :(POSITIVE) and $SPK1$ :(NEGATIVE).	Ensure proper connection to the rest of the circuit to prevent distortion.
6	Analyze Circuit Function	Power the circuit and observe operation $e.g.,: sound: from: SPK1$.	$SPK1$ should emit expected sound.
7	Test Net Connections	Use continuity tests on all nets: Net 1, Net 2, Net 3, Net 4, Net 5.	Confirm all logical connections are intact per design.
8	Simulate the Circuit	Use Flux's simulation feature to run a virtual test.	Validate expected behavior and outputs without real-world interference.

This plan is designed to methodically test each part and connection in your project to ensure all components are working correctly and that the overall circuit operates as intended. Please make any adjustments if there are specific requirements or constraints for your project.

syug

Syu

copilot

Let's create a step-by-step plan to verify the functionality of your project. This will involve checking connections, testing components, and ensuring overall circuit functionality. Here's a detailed table outlining these steps:

Table

Step	Description	Actions Required	Expected Outcome
1	Verify Schematic Connections	Manually inspect the schematic to ensure all components are connected as per the design. Check against the project nets provided.	Connections match the intended design.
2	Visual Inspection	Verify physical components are placed correctly on the PCB or breadboard. Ensure orientation of polarized components like capacitors, LEDs, and transistors (BC547B and BC558) is correct.	Components are in correct positions and orientations.
3	Measure Component Values	Use a multimeter to measure resistance values of $R1$ and $R2$ and capacitance of $C1$. Compare with expected values $330K$, $10K$, $100nF$ respectively.	Measurements match expected component values.
4	Power Supply Check	Check the power supply connections. Ensure correct voltage and polarity are supplied through $J1$.	Power supply is connected correctly and providing expected voltage.
5	Transistor Biasing Verification	Check the biasing of transistors $Q1$ and $Q2$. Measure base-emitter voltages and compare with expected saturation and cutoff values.	Transistors show correct biasing conditions.
6	Functional Testing	Apply power and observe the behavior of the circuit. For an LED circuit, observe if the functionality intended (such as lighting up or blinking) occurs as expected.	Circuit functions correctly as per design expectations.
7	Signal Integrity Check (if applicable)	For circuits involving signals, check waveform shapes using an oscilloscope. Ensure signals meet expected frequency and amplitude parameters.	Signals display expected characteristics without distortion.
8	Audio Output Test (for $SPK1$)	If applicable, check if the speaker outputs sound when connected as intended in the project design.	Speaker produces expected audio output.
9	Final Review and Documentation	Review the overall setup and document any discrepancies or observations. Prepare notes for any changes or adjustments needed.	Comprehensive understanding and record of the project's functionality.

By following this table, you can systematically verify the functionality of your project. Let me know if you need further elaboration on any step or have other questions!

Resistance

10K Ω

Capacitance

100 F

SPK1

Reviews

Electrical Rule Checks

Missing Footprints

Reports parts that have no footprint.

Design Rule Checks

Overlapping Copper

Reports copper elements that are shorting.

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides

Reports components that have been modified using the "!important" flag.

Airwires

Reports missing routed traces between pads in a net.

Deprecated Rules

Reports nodes that are using rules that are not supported anymore.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper

Detect any via, trace or copper fill island that is not connected to any net.

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number

Reports parts that have no manufacturer part number.

Parts Available

Beta

Checks that all parts have a part number and are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

[Example] LED Simulator Template

Controls

Properties

Forward Voltage

1.70 V

Part Type

LED

Manufacturer Name

https://www.microchip.com/

Manufacturer Part Number

CTL1206FYW1T

Datasheet URL

https://page.venkel.com/hubfs/Resources/Datasheets/LEDs/CTL1206FYW1T.pdf

Designator Prefix

LED

Availability & Pricing

DPN		Stock	Qty 1
	1	27K	$0.04269
	1	0	$0.113

Assets

led-on.svg

id=led-on

Footprint

LED_1206_3216Metric.kicad_mod

id=LED_1206_3216Metric

3d Model

LED_1206_3216Metric.step

id=3D_LED_1206_3216Metric

DefaultThumbnail

led-off.svg

id=led-off

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.