Schematic Design Analysis

Im in the rules tab to the left part of my screen, do i click the add ruleset button?

Thought for 22 sec

If you want to restrict routing to the top copper layer using a dedicated ruleset, then yes—you can click the Add Ruleset button to create a new one. Here’s what to do next:

Create a New Ruleset (if needed):
- Click the Add Ruleset button.
- Give your new ruleset a clear name (e.g., "Top Copper Only").
Edit Routing or Trace Rules:
- Within the new ruleset, find the routing or trace rule settings.
- Look for an option that lets you select the allowed routing layers.
- Deselect all layers except the Top Copper layer.
Apply and Save the Ruleset:
- Confirm and save your changes in the rules editor.
- Ensure that this ruleset is active for your PCB.

After setting these preferences, you can proceed to the Auto Layout feature (typically located in the PCB editor toolbar) to autoroute your connections using only the top copper layer.

This way, your design will comply with your CNC laser requirements for a single-layer copper trace output.

Component Selection Research

Power Section

Main IC selection

Si tengo conectada la tierra en mi circuito, por que me sale que tengo cables vo...

sparta24344

@copilot Si tengo conectada la tierra en mi circuito, por que me sale que tengo cables volando en el aire? Explicamelo y luego dime como lo puedo arreglar?

copilot

Cuando te encuentras con cables "volando en el aire" en un circuito, generalmente significa que hay conexiones que no están completamente definidas o que los componentes conectados no tienen todos sus pines ligados a las redes adecuadas. Aquí hay algunas razones comunes y soluciones para este problema:

Razones Comunes:

Pines No Conectados: Existe uno o más pines de componentes que no se han conectado a ninguna red o punto del circuito. Esto puede dar la apariencia de que los cables están "en el aire".
Errores en la Red GND: Puede que la red GND no esté correctamente conectada a todos los componentes que deberían estar asociados con ella.
Componentes Duplicados o Incorrectos: A veces puede haber componentes redundantes o incorrectamente colocados que no están conectados apropiadamente.

Cómo Solucionarlo:

Revisar Conexiones: Verifica todas las conexiones que has hecho en el esquema para asegurarte de que cada pin de cada componente esté conectado a alguna red.
Verificar la Conexión de Tierra: Asegúrate de que la red GND (tierra) esté conectada correctamente a todos los pines GND de los componentes. En tu proyecto actual, la red GND está correctamente conectada a varios pines de componentes como $R4$ :(3), $U1$ (GND), etc.
Revisar Nombres de Redes: Si has nombrado tus redes, asegúrate de que sean correctas y de que no haya errores tipográficos o duplicaciones involuntarias.
Usar la Herramienta de Verificación de Flotación: Muchos programas CAD como Flux tienen una función de verificación o depuración que te permiten ver gráficamente qué pines o conexiones no están correctamente ligados a una red.

Verificación para tu Caso:

Para tu proyecto, verifica que todos los pines de la red GND estén bien conectados. Algo que podrías hacer es asegurarte de que este tipo de conexiones estén completas:

Ya tienes estas conexiones:
- $C1$ :(P2) a red GND
- $R5$ :(P1) a red GND
- $U1$ (GND) a red GND

Una revisión detenida de todas las conexiones del circuito podría ayudar a identificar componentes mal conectados o faltantes.

Si sigues estos pasos y aún encuentras problemas, quizás quieras compartir más detalles específicos sobre los errores que encuentras para que pueda ayudarte mejor.

Someone is typing...

Resistance

1 Ω

Resistance

1 Ω

R10

Resistance

5kΩ

Resistance

3.3 Ω

Resistance

3.3 Ω

Resistance

5kΩ

Resistance

390 Ω

Resistance

390 Ω

Capacitance

1000uF

Capacitance

0.1 F

Resistance

10kΩ

Bocina 1

Capacitance

Alimentacion

Capacitance

1000uF

C11

Capacitance

470uF

Capacitance

C10

Capacitance

1000uF

Capacitance

1000uF

Bocina 2

Capacitance

470uF

Resistance

10kΩ

Capacitance

0.1 F

C12

Capacitance

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.6k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k

Project Name

Description

Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Arrow	$1.54–$2.00
Digi-Key	$3.49–$4.18
LCSC	$2.17–$2.22
Mouser	$3.54
Verical	$1.83–$3.01

Controls

Welcome 👋

Flux accelerates your PCB design with AI.

Create your account to start using this component and bring your ideas to life.