Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
PCA9632DP1,118
40 power reduction compared to PCA9633 4 LED drivers. Each output programmable at: Off On Programmable LED brightness Programmable group dimming/blinking mixed with individual LED brightness 1 MHz Fast-mode Plus I2C-bus interface with 30 mA high drive capability on SDA output for driving high capacitive buses 256-step (8-bit) linear programmable brightness per LED output varying from fully off (default) to maximum brightness using a 1.5625 kHz PWM signal in Individual brightness m
4 Uses0 StarsKTD2027BEWE-TR
LED Lighting Driver ICs LED Lighting Drivers 4-Channel RGBW Driver, I2C, 1.5x1.5mm TDFN The KTD2027BEWE-TR is a highly integrated, low-power RGB LED driver designed for portable and battery-powered applications. It features a compact WLCSP package and provides precise current control for up to three LED channels. The device includes an I²C-compatible interface, enabling flexible control of brightness, color mixing, and lighting effects. Integrated features such as programmable current sinks, dimming control, and built-in protection mechanisms make it suitable for indicators, backlighting, and decorative lighting in consumer electronics. Key Features Triple-channel constant current LED driver (RGB support) I²C-compatible digital interface Independent brightness control per channel Programmable current up to ~24 mA per channel Built-in PWM dimming and pattern generation Low quiescent current for power-sensitive applications Wide input voltage range Thermal shutdown and overcurrent protection Small WLCSP package (suitable for compact designs) Applications Mobile devices and wearables Status indicators and notification LEDs Backlighting and decorative lighting IoT and portable electronics Absolute Maximum Ratings Supply Voltage (VDD): −0.3 V to +6.0 V Logic Input Voltage: −0.3 V to VDD + 0.3 V Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −55°C to +150°C Recommended Operating Conditions Supply Voltage (VDD): 1.8 V to 5.5 V LED Forward Voltage: Dependent on external LEDs Ambient Temperature: −40°C to +85°C Electrical Characteristics (Typical) Supply Current (Idle): < 1 µA (shutdown mode) Channel Current Accuracy: ±5% (typical) Maximum Output Current: ~24 mA per channel I²C Clock Frequency: Up to 400 kHz (Fast Mode) Functional Description The KTD2027BEWE-TR operates as a constant-current sink driver for RGB LEDs. Each channel can be independently programmed via the I²C interface to control brightness and enable dynamic lighting effects. Internal PWM generators allow smooth dimming without requiring continuous microcontroller intervention. The device also integrates protection features such as thermal shutdown and current limiting to ensure reliable operation. Pin Configuration (Typical WLCSP) VDD – Power supply GND – Ground SDA – I²C data line SCL – I²C clock line LED1 – Current sink output (Red) LED2 – Current sink output (Green) LED3 – Current sink output (Blue) Package Information Package Type: WLCSP (Wafer-Level Chip Scale Package) Mounting: Surface mount Tape & Reel: Yes (TR suffix) Ordering Information KTD2027BEWE-TR: Tape and reel packaging for automated assembly #commonpartslibrary #integratedcircuit #leddriver
2 Uses0 StarsSDP33-1500Pa-TR-250pcs
Pressure Sensor +/-0.22PSI (+/-1.5kPa) Differential Male - 0.08\" (2.00mm) Tube, Dual 16 b 16-SMD Module, Dual Top Ports The SDP33-1500Pa-TR-250PCS is a digital differential pressure sensor module from Sensirion AG, designed for high-precision measurement of low-pressure differences up to ±1500 Pa (±1.5 kPa). It belongs to the SDP3x series, which uses Sensirion’s CMOSens® technology for compact, accurate, and stable sensing performance. It is widely used in HVAC systems, airflow measurement, medical devices, and industrial control applications where precise air or gas flow monitoring is required. Key Features Differential Pressure Measurement Range: ±1500 Pa (±1.5 kPa) Digital Output Interface I²C communication for easy MCU integration High Resolution 16-bit digital output Accurate & Stable Performance Factory-calibrated and temperature compensated No zero-point drift Low Power Consumption Designed for battery-powered and embedded systems Compact SMD Module Small footprint, surface-mount package (easy PCB integration) Fast Response Time Suitable for real-time airflow and pressure monitoring Wide Operating Conditions Supply voltage: ~3.3V Operating temperature: -40°C to +85°C Reflow Solderable Compatible with standard SMT manufacturing processes Reliable Long-Term Stability Built for high-volume industrial and commercial applications Typical Applications HVAC airflow and filter monitoring Ventilation and air quality systems Medical respiratory devices Industrial automation and process control Drones and airspeed (pitot tube systems) IoT environmental sensing #CommonPartsLibrary #Sensor
2 Uses0 StarsSSW-120-01-T-S
20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSW-120-01-T-S is a single-row, 20-position female (receptacle) socket strip with a 2.54 mm (0.1") pitch, intended for through-hole PCB mounting. It uses Samtec’s Tiger Buy™ contact system, providing reliable electrical performance and durability for repeated mating cycles. It is commonly used in embedded systems, development boards, and general PCB interconnections, especially where standard 0.1" headers are required. Female header 1x20 2.54mm Key Features Standard 2.54 mm Pitch Industry-standard spacing compatible with most pin headers and prototyping systems 20 Positions, Single Row Ideal for compact signal connections and header interfaces Tiger Buy™ Contact System Provides low insertion force and reliable electrical contact Available in standard or low insertion force variants Through-Hole Mounting Ensures strong mechanical retention and durability on PCBs Tin-Plated Contacts (T option) Cost-effective plating suitable for general-purpose applications High-Speed Capability Supports signals up to ~8 Gbps, depending on application and layout Wide Operating Temperature Range Typically −55 °C to +105 °C, suitable for industrial environments Material Construction Contacts: Phosphor bronze Insulator: High-temperature plastic (e.g., LCP) Versatile Mating Compatibility Mates with common Samtec header series (TSW, MTSW, etc.) and standard 0.025" square posts #CommonPartsLibrary #Connector #SSW-120
86 Uses0 StarsTSW-103-07-G-D
Connector Header Through Hole 6 position 0.100" (2.54mm) The TSW-103-07-G-D is a through-hole, dual-row (2×3) male pin header from the TSW series of Samtec. It is designed for board-to-board or cable-to-board interconnections, using a standard 2.54 mm (0.1″) pitch, making it widely compatible with common PCB layouts and prototyping systems. This connector features gold-plated square posts for reliable electrical contact and durability, and is commonly used in embedded systems, development boards, and general electronics applications. Key Features Connector Type: Male pin header (unshrouded) Number of Positions: 6 pins (2 rows × 3 pins) Pitch: 2.54 mm (0.100″) standard spacing Mounting Type: Through-hole soldering Contact System: 0.025″ (0.635 mm) square post Contact Material: Phosphor bronze with gold plating Orientation: Vertical (straight) Row Spacing: 2.54 mm Operating Temperature: −55 °C to +125 °C Insulator Material: PBT (UL94 V-0 rated) Typical Use: Board-to-board or cable interface AVR ISP 2x3 2.54mm header #commonpartslibrary #connector #header
235 Uses0 Stars615006141121
Jack Modular Connector 6p6c (RJ11, RJ12, RJ14, RJ25) 90° Angle (Right) Shielded Cat5 The 615006141121 is a board-to-board or wire-to-board connector component designed for reliable electrical interconnection in electronic assemblies. It is typically used in compact PCB layouts where secure mating, consistent contact performance, and durability are required. This connector is suited for applications in consumer electronics, industrial equipment, and embedded systems, offering dependable signal and power transmission. Key Features: Compact connector design for space-constrained applications High-reliability contact interface Designed for PCB mounting ապահով secure mating and retention Suitable for signal and low-power connections Mechanical Characteristics: Mounting Type: Through-hole or surface-mount (depending on variant) Orientation: Vertical or right-angle configuration Contact Configuration: Multi-position connector Pitch: Standard fine-pitch spacing typical for board-level connectors Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with plated finish Electrical Characteristics: Contact Resistance: Low contact resistance for stable signal integrity Insulation Resistance: High insulation resistance Rated Voltage: Suitable for low-voltage applications Current Rating: Designed for signal-level or moderate current carrying Environmental Characteristics: Operating Temperature Range: Suitable for standard industrial temperature ranges RoHS Compliance: Yes Durability: Designed for multiple mating cycles Applications: Embedded systems Consumer electronics Industrial control boards Communication devices PCB interconnect solutions #commonpartslibrary #connector #jackmodular
51 Uses0 StarsPPPC082LJBN-RC
16 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold The PPPC082LJBN-RC is a dual-row, right-angle pin header connector intended for through-hole PCB mounting. It uses a standard 2.54 mm pitch with a 2×8 pin configuration and is commonly used for board-to-board or board-to-cable connections. The connector provides stable mechanical support and reliable electrical performance, making it suitable for prototyping, embedded systems, and general-purpose electronic designs. Mechanical Specifications Connector Type: Pin Header Mounting Type: Through-Hole, Right Angle Number of Positions: 16 (2×8) Pitch: 2.54 mm Row Spacing: 2.54 mm Contact Orientation: Right Angle Termination Style: Solder Housing Material: Thermoplastic (UL94V-0 rated) Contact Material: Brass Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically 250 V Contact Resistance: ≤ 20 mΩ Insulation Resistance: ≥ 1000 MΩ Dielectric Withstanding Voltage: ~500 VAC Environmental Specifications Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94V-0 RoHS Compliance: Yes Plating Contact Plating: Gold flash over nickel (typical) Tail Plating: Tin over nickel Applications PCB interconnections Embedded systems and microcontroller boards Industrial control interfaces Consumer electronics prototyping Signal and low-power connections Mating Compatibility Compatible with standard 2.54 mm pitch female headers and IDC connectors #commonpartslibrary #connector #header
10 Uses0 Stars218-2LPSTJ
Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst
13 Uses0 Stars1761607-3
Connector Header Through Hole, Right Angle 10 position 0.100" (2.54mm) The 1761607-3 is a pluggable terminal block connector manufactured by TE Connectivity. It is designed for reliable wire-to-board connections in industrial and electronic applications. The connector supports screw-clamp termination, allowing secure and reusable wire connections. Its modular design enables easy installation and maintenance, making it suitable for control systems, power distribution, and signal interfacing. Key Features Pluggable terminal block connector Screw-clamp wire termination Reliable mechanical and electrical connection Modular and field-serviceable design Suitable for industrial environments Electrical Characteristics Rated voltage: up to 300 V (typical, application dependent) Rated current: up to 8 A (depending on wire size and conditions) Contact resistance: low contact resistance for stable conductivity Insulation resistance: high insulation resistance Mechanical Characteristics Number of positions: 3 Pitch: 3.5 mm Termination type: screw clamp Wire size range: typically 26 AWG to 16 AWG Mounting type: through-hole PCB Mating type: pluggable header interface Material Properties Housing material: high-temperature thermoplastic Contact material: copper alloy Contact plating: tin plating Flammability rating: UL94 V-0 Environmental Specifications Operating temperature range: −40°C to +105°C RoHS compliant Suitable for industrial applications Applications Industrial control systems Power supply connections Signal interface modules Automation equipment HVAC and building control systems Compliance & Standards RoHS compliant UL recognized (application dependent) IEC standard compliant terminal block design #commonpartslibrary #connector #header
21 Uses0 Stars
