Buck Switching Regulator IC Positive Adjustable 2.5V 1 Output 1A 14-PowerTSSOP (0.173", 4.40mm Width) The LM5010 step-down switching regulator features all the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying in excess of 1-A load current. This high-voltage regulator contains an N-Channel Buck Switch, and is available in thermally enhanced 10-pin WSON and 14-pin HTSSOP packages. The hysteretic regulation scheme requires no loop compensation, resulting in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the ON-time. The valley current limit detection is set at 1.25 A. Additional features include: VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter Features 1• Input Voltage Range: 8 V to 75 V • Valley Current Limit At 1.25 A • Switching Frequency Can Exceed 1 MHz • Integrated N-Channel Buck Switch • Integrated Start-Up Regulator • No Loop Compensation Required • Ultra-Fast Transient Response • Operating Frequency Remains Constant With Load and Line Variations • Maximum Duty Cycle Limited During Start-Up • Adjustable Output Voltage • Precision 2.5-V Feedback Reference • Thermal Shutdown • Exposed Thermal Pad for Improved Heat Dissipation 2 Applications • High Efficiency Point-of-Load (POL) Regulator • Non-Isolated Telecommunications Buck Regulator • Secondary High Voltage Post Regulator • Automotive Systems #TexasInstruments #LM5010MHXNOPB #BuckRegulator #DCDCConverter #SwitchingRegulator #PowerManagement #HighVoltage #StepDownConverter #IndustrialElectronics #EmbeddedSystems #PowerSupplyDesign #HTSSOP14 #PMIC #ElectronicsDesign #VoltageRegulator

Video Switch IC 1 Channel 14-SOIC The LMH6574MAX/NOPB is a high-speed, 4:1 video multiplexer amplifier manufactured by Texas Instruments. It is designed for routing multiple analog video or high-bandwidth signals into a single output while maintaining excellent signal integrity. With wide bandwidth, low distortion, and fast switching characteristics, it is well-suited for applications such as video switching, RGB routing, medical imaging, and high-speed data acquisition systems. Key Features 4:1 high-speed analog video multiplexer Wide small-signal bandwidth: ~500 MHz (typical) Fast channel switching time: ~8 ns (typical) Low differential gain and phase for video fidelity High slew rate: ~1800 V/µs Low crosstalk and channel-to-channel isolation Single-supply operation: 5 V TTL/CMOS compatible logic inputs Internal 75 Ω back-termination support (video applications) Output disable (high impedance mode) Electrical Characteristics Supply Voltage (Vcc): 4.5 V to 5.5 V Supply Current: ~13 mA (typical) Input Voltage Range: 0 V to Vcc Output Voltage Swing: ~2 Vpp (video typical) Gain: 2 V/V (fixed gain configuration) Input Resistance: High impedance Output Resistance: Low impedance (video drive capable) Dynamic Performance -3 dB Bandwidth: ~500 MHz Slew Rate: ~1800 V/µs Settling Time: ~10 ns Channel Switching Time: ~8 ns Crosstalk: <-60 dB (typical at 10 MHz) Package Information Package Type: SOIC-8 (MAX) Mounting Type: Surface Mount Lead Finish: NiPdAu (RoHS compliant) Operating Temperature Range: -40°C to +85°C Pin Configuration (Summary) 4 Analog Inputs (IN0–IN3) 1 Analog Output (OUT) 2 Digital Select Lines (A0, A1) Enable/Disable Control (EN) Power Supply (Vcc) Ground (GND) Applications Video signal routing and switching (RGB, CVBS) CCTV and broadcast systems Medical imaging equipment Test and measurement instruments High-speed analog multiplexing Data acquisition front-end switching Compliance & Notes RoHS compliant (NOPB = Lead-free package) Designed for 75 Ω video systems Requires proper PCB layout for high-frequency performance (controlled impedance, short traces) #commonpartslibrary #integratedcircuit

SLC NAND Flash Parallel/Serial 3.3V 256G-bit 32G x 8 100-Pin LBGA FLASH - NAND (SLC) Memory IC 256Gbit Parallel 100 MHz 100-LBGA (12x18) The MT29F256G08AUCABH3-10ITZ:A is a high-density 256Gb Single-Level Cell (SLC) NAND Flash memory device from Micron Technology. It provides non-volatile data storage with high reliability, fast read/write performance, and long endurance, making it suitable for industrial, networking, embedded computing, automotive, and data-logging applications. The device supports both asynchronous and synchronous interfaces and complies with the Open NAND Flash Interface (ONFI) standard for enhanced interoperability and performance. It is housed in a compact 100-ball LBGA package (12 mm × 18 mm). • Open NAND Flash Interface (ONFI) 2.2-compliant1 • Single-level cell (SLC) technology • Organization – Page size x8: 8640 bytes (8192 + 448 bytes) – Block size: 128 pages (1024K + 56K bytes) – Plane size: 2 planes x 2048 blocks per plane – Device size: 32Gb: 4096 blocks; 64Gb: 8192 blocks; 128Gb: 16,384 blocks; 256Gb: 32,768 blocks • Synchronous I/O performance – Up to synchronous timing mode 5 – Clock rate: 10ns (DDR) – Read/write throughput per pin: 200 MT/s • Asynchronous I/O performance – Up to asynchronous timing mode 5 – tRC/tWC: 20ns (MIN) – Read/write throughput per pin: 50 MT/s • Array performance – Read page: 35µs (MAX) – Program page: 350µs (TYP) – Erase block: 1.5ms (TYP) • Operating Voltage Range – VCC: 2.7–3.6V – VCCQ: 1.7–1.95V, 2.7–3.6V • Command set: ONFI NAND Flash Protocol • Advanced Command Set – Program cache – Read cache sequential – Read cache random – One-time programmable (OTP) mode – Multi-plane commands – Multi-LUN operations – Read unique ID – Copyback • First block (block address 00h) is valid when shipped from factory. For minimum required ECC, see Error Management (page 114). • RESET (FFh) required as first command after power-on • Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status • Data strobe (DQS) signals provide a hardware method for synchronizing data DQ in the synchronous interface • Copyback operations supported within the plane from which data is read • Quality and reliability – Data retention: JESD47G compliant; see qualification report – Endurance: 60,000 PROGRAM/ERASE cycles • Operating temperature: – Commercial: 0°C to +70°C – Industrial (IT): –40ºC to +85ºC • Package – 52-pad LGA – 48-pin TSOP – 100-ball BGA – 132-ball BGA #Micron #NANDFlash #SLCNAND #FlashMemory #NonVolatileMemory #ONFI #EmbeddedSystems #IndustrialElectronics #DataStorage #MemoryIC #LBGA100 #HighReliability #MT29F256G08AUCABH310ITZA #MicronMemory #ParallelNANDFlash

This is a QRE1113 opto-reflective sensor module, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #OpticalSensor #industrialSensing #reusable #module #industrialsensing #onsemi #sublayout