1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.2 VBAT The BQ24075TRGTR (from Texas Instruments) is a highly integrated single-cell Li-Ion / Li-Polymer linear battery charger IC with power-path management. It is designed for portable and space-constrained applications, allowing a device to be powered from a USB port or AC adapter while simultaneously charging the battery. The device integrates charging control, power-path management, and safety features into a compact package. A key feature is its Dynamic Power Path Management (DPPM), which ensures the system is powered even when the battery is low or absent, while intelligently managing charging current. Key Features Battery Charging Supports single-cell Li-Ion / Li-Polymer batteries Up to 1.5 A programmable charge current Three-phase charging: Pre-charge (conditioning) Constant current Constant voltage Fixed 4.2 V charge voltage Power Path Management Dynamic Power Path Management (DPPM): Powers system and charges battery simultaneously Prioritizes system load over charging Allows system operation even with: Deeply discharged battery No battery connected Input & Power Features Operates from: USB input (100 mA / 500 mA selectable) AC adapter Programmable input current limit up to 1.5 A Input voltage range: ~4.35 V to 6.4 V (28 V max rating) Input dynamic power management (VIN-DPM) prevents source overload Protection & Safety Thermal regulation and shutdown Over-voltage protection (OVP) Short-circuit and reverse current protection Battery temperature monitoring (NTC thermistor input) Battery disconnect (SYSOFF) feature Control & Status Standalone operation (no MCU required, resistor-programmable) Charge status outputs: Charging Charge complete Power good Physical Characteristics Package: 16-pin VQFN (3 mm × 3 mm) Operating temperature: –40°C to +85°C #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

1-cell, 1-A, Li-ion battery charger with 50-mA LDO 10-WSON -40 to 85 #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

2A 1-Cell to 2-Cell Li-Ion Battery Charger in a QFN-16 (3mmx3mm) Package #ultralibrarian

24V Input 2A 600kHz 4S Cell Switching Li-Ion Battery Charger #ultralibrarian

2A 1-Cell to 2-Cell Li-Ion Battery Charger in a QFN-16 (3mmx3mm) Package #ultralibrarian

600kHz Switching Li-Ion Battery Charger #ultralibrarian

600kHz Switching Li-Ion Battery Charger #ultralibrarian

2A 1 Cell Li-Ion Battery Charger in 3mmx3mm Package #ultralibrarian

1A Linear Li-Ion Battery Charger with Trickle Charge #ultralibrarian

28V 1A Linear Li-Ion Battery Charger with Trickle Charge #ultralibrarian

28V 1A Linear Li-Ion Battery Charger with Trickle Charge #ultralibrarian

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051RMWR. EN is internally pulled up to VIN Input Voltage Range: 2.5V to 5.5V

5V USB 1000mA I2C-Controlled Linear Charger with Power Path Management for Single-Cell Li-Ion Battery in QFN Package #ultralibrarian

1-4 series Li-ion battery pack manager supporting Turbo Mode 2.0 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #BatteryManagement #BQ40Z50

Battery Battery Protection IC Lithium Ion/Polymer SOT-23-6 S-8261ABJMD-G3JT2G is a high-accuracy lithium-ion/lithium-polymer battery protection IC designed for single-cell battery packs. It integrates voltage detection and timing circuits to protect rechargeable batteries against overcharge, overdischarge, overcurrent, and short-circuit conditions, helping improve battery safety, reliability, and lifespan. The device is commonly used in portable electronics, battery packs, IoT devices, and handheld equipment. It is housed in a compact SOT-23-6 package suitable for space-constrained designs. Key Features Single-cell Li-ion / Li-polymer battery protection IC High-accuracy overcharge detection High-accuracy overdischarge detection Overcurrent and short-circuit protection Built-in delay circuits to prevent false triggering Low current consumption (typical operating current in the µA range) Wide operating voltage range Support for 0 V battery charging function Compact SOT-23-6 package RoHS compliant and lead-free version available Typical Applications Li-ion battery packs Li-polymer battery packs Portable consumer electronics Wireless sensors and IoT devices Handheld instruments Rechargeable battery-powered equipment #BatteryProtectionIC #LiIonBattery #LiPoBattery #PowerManagement #BatteryPackProtection #OverchargeProtection #OverdischargeProtection #ShortCircuitProtection #SOT23 #ABLIC #SeikoInstruments #PortableElectronics #RechargeableBattery #PMIC #SingleCellBattery

500mA Single-Cell Li-ion Battery Charger with Power Path Management 1mA Termination and <1μA Battery Leakage #ultralibrarian

This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ25895 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This project is a reference design based on the BQ24075RGTT, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ24075 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

This project is a reference design based on the BQ25606, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ25606 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This project is a reference design based on the BQ24295, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ24295 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This project is a reference design based on the BQ25890, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ25890 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This project is a reference design based on the BQ24230 , a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ24230 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout #polygon

This project is a reference design based on the ISL6292, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #ISL6292 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #renesas #sublayout

500mA Single-Cell Li-ion Battery Charger with Power Path Management 1mA Termination and <1μA Battery Leakage #ultralibrarian