Video Switch IC GPIO, I2C HDMI 1.3a 64-TQFP (10x10) Package #commonpartslibrary #integratedcircuit #videoswitch

Video Reclocker IC Serial, SPI AES10, DVB-ASI, SMPTE 32-WQFN (5x5) Package #commonpartslibrary #integratedcircuit #videoprocessing

Video Receiver IC I²S, Serial HDMI 1.4a, IEC 60958 128-TQFP-EP (14x14) Package #CommonPartsLibrary #IntegratedCircuit #Linear #Video-Processing #ADV7619

Differential Amplifier 1 Circuit Differential 8-MSOP #Amplifier #Video #commonpartslibrary

2 Circuit IC Switch 2:1 10Ohm 10-UQFN (2.0x1.5) The TS5A23157 device is a dual single-pole doublethrow (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. Signals up to 5.5 V (peak) can be transmitted in either direction. Features 1• Low ON-State Resistance (15 Ω at 125℃) • 125℃ Operation • Control Inputs are 5-V Tolerant • Specified Break-Before-Make Switching • Low Charge Injection • Excellent ON-Resistance Matching • Low Total Harmonic Distortion • 1.8-V to 5.5-V Single-Supply Operation • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C101) 2 Applications • Sample-and-Hold Circuits • Battery-Powered Equipment • Audio and Video Signal Routing • Communication Circuits #commonpartslibrary #integratedcircuit #circuitswitch #TexasInstruments #AnalogSwitch #SPDT #SignalRouting #Multiplexer #LowOnResistance #HighSpeedSwitching #UQFN #EmbeddedSystems #ElectronicsDesign

Video Switch IC Logic DVI 1.0, HDMI 1.4 42-WQFN (3.5x9) Package #CommonPartsLibrary #IntegratedCircuit #Linear #Video-Processing #TS3DV621

LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 32-WFQFN Exposed Pad, CSP The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #Isolator #ADN4624BCPZ #AnalogDevices #LVDS #DigitalIsolator #GalvanicIsolation #HighSpeedCommunication #SERDES

4-Channel Wideband and Video Multiplexer, DIP-18 #CommonPartsLibrary #IntegradedCircuits #Interface #AnalogSwitches #Multiplexers #Demultiplexers

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.

Application Processor integrating a quad-core Arm Cortex-A55 64-bit CPU operating at up to 2.0 GHz, an Arm Mali-G52 2EE GPU, and a 1 TOPS INT8 NPU. Supports DDR3/DDR3L/DDR4/LPDDR3/LPDDR4/LPDDR4X memory, 4K H.264/H.265/VP9 video decoding, 1080p60 H.264/H.265 video encoding, and interfaces including PCIe 3.0, SATA 3.0, USB 3.0/2.0, Gigabit Ethernet, HDMI 2.0, eDP 1.3, MIPI-CSI, MIPI-DSI, CAN, SDIO/eMMC, UART, SPI, I²C, and PWM. Packaged in a FCBGA636L (19 × 19 mm) package. Hashtags: #ApplicationProcessor #SoC #Rockchip #RK3568 #CortexA55 #MaliG52 #NPU #EmbeddedProcessor #AIoT #FCBGA636 #BGA636 #DDR4 #LPDDR4X #PCIe3 #USB3 #HDMI2 #GigabitEthernet

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.