Linear Voltage Regulator IC Positive Fixed 1 Output 600mA SOT-25 3.3V LDO AP2112K-3.3 The AP2112K-3.3TRG1 is a low dropout (LDO) linear voltage regulator designed to provide a stable 3.3V output from a higher input voltage. It is optimized for low noise, high power supply rejection ratio (PSRR), and low quiescent current, making it suitable for battery-powered and noise-sensitive applications. The device features current limiting and thermal shutdown protection, ensuring reliable operation under fault conditions. It is commonly used in portable electronics, RF modules, microcontroller power supplies, and other low-power systems. Key Features Fixed output voltage: 3.3V Output current: up to 600 mA Low dropout voltage: ~250 mV at 300 mA load High PSRR: up to 70 dB at 1 kHz Low quiescent current: typically 55 µA Stable with low ESR ceramic capacitors Built-in overcurrent protection Thermal shutdown protection Fast transient response Absolute Maximum Ratings Input Voltage (VIN): up to 6.5 V Output Current: Internally limited Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Electrical Characteristics (Typical values unless otherwise specified) Output Voltage Accuracy: ±2% Dropout Voltage: 250 mV @ 300 mA 400 mV @ 600 mA Line Regulation: 0.05%/V Load Regulation: 0.2% Quiescent Current: 55 µA Shutdown Current: <1 µA PSRR: 70 dB @ 1 kHz 45 dB @ 10 kHz Pin Configuration (SOT-23-5 / SC-70-5) VIN – Input voltage GND – Ground EN – Enable (active high) NC – No connection VOUT – Regulated output (3.3V) Package Information Package Type: SOT-23-5 (TRG1 suffix indicates tape & reel) Mounting: Surface mount Small footprint suitable for compact PCB layouts Typical Applications Battery-powered devices Wireless modules (Wi-Fi, Bluetooth, RF) Microcontroller and FPGA power supplies Portable consumer electronics Sensor and analog circuits requiring low noise Compliance & Reliability RoHS compliant Lead-free package Designed for high reliability and long operational life #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole screw terminal 2 pin 3.5mm This component is a printed circuit board mounted screw terminal block designed to provide a secure and serviceable wire-to-board connection. It accommodates two conductors and uses a screw clamp mechanism to ensure reliable electrical and mechanical contact. The compact 3.5 mm pitch makes it suitable for space-constrained designs while maintaining adequate creepage and clearance distances for low-voltage applications. The terminal is intended for through-hole mounting and supports field wiring without the need for specialized tools, making it appropriate for industrial control systems, power distribution modules, and general-purpose electronic assemblies. Mechanical Characteristics: The terminal block is constructed with a high-temperature thermoplastic housing that provides mechanical strength and electrical insulation. The housing is typically green in color and designed for side-entry wire insertion. The clamping system uses metal screws and pressure plates to secure stripped wire ends. The component is designed for through-hole PCB mounting with soldered pins providing structural stability. The form factor supports modular placement along the PCB edge for accessible wiring. Electrical Characteristics: The device is designed for low to moderate voltage and current applications typical of signal and power connections in control electronics. Conductive elements are made from metal alloys with appropriate plating to ensure good conductivity and resistance to corrosion. The screw clamp connection provides stable contact resistance under vibration and thermal cycling conditions. Material and Environmental Characteristics: The insulating body is made from flame-retardant thermoplastic material compliant with relevant safety standards. The component is suitable for standard operating temperature ranges encountered in industrial and commercial electronics. Materials are selected to meet common environmental and regulatory requirements such as RoHS compliance. Application Considerations: This terminal block is intended for applications requiring reliable field wiring connections, ease of maintenance, and secure termination. It is commonly used in power supplies, control panels, interface modules, and embedded systems. Proper PCB footprint design and adherence to recommended soldering practices are required to ensure optimal performance and reliability. #CommonPartsLibrary #Connector #Terminal-Block #WR-TBL Series 1377

JST PH Connector Header Through Hole 3 position 0.079" (2.00mm) The B3B-PH-K-S(LF)(SN) is a 3-position, 2.0 mm pitch, through-hole (THT) male header from the JST PH series, designed for wire-to-board connections. It is a top-entry, shrouded connector that mates with JST PH crimp housings, commonly used for compact internal wiring in electronic devices such as consumer electronics, battery connections, and embedded systems. This connector is optimized for high-density PCB layouts, offering a reliable and secure connection with a locking mechanism and low contact resistance. Key Features Mechanical 3 positions (3-pin) 2.0 mm pitch (compact spacing) Through-hole mounting (THT) Top-entry / vertical orientation Shrouded header (prevents misalignment) Detent lock / friction lock for secure mating Electrical Rated current: up to 2A per pin Rated voltage: up to 100V AC/DC Low contact resistance (~10 mΩ max initial) High insulation resistance (≥1000 MΩ) Environmental Operating temperature: -25°C to +85°C Design & Reliability Fully shrouded design → protects pins and ensures proper insertion Reliable contact structure with dimpled contacts for stable connection PCB retention mechanism → improves mechanical stability Tin-plated contacts for good conductivity and solderability Application Use Commonly used for: Battery connectors Sensor modules Embedded systems (e.g., microcontroller boards) Consumer electronics internal wiring Power + signal low-current connections #commonpartslibrary #connector #header #tht

WiFi Modules (802.11) (Engineering Samples) SMD module, ESP32-C3, 4MB SPI flash, PCB antenna, -40 C +85 C

Display Modules - LED Character and Numeric Red 7-Segment 1 Character Common Cathode 2.1V 20mA 0.670" H x 0.495" W x 0.315" D (17.02mm x 12.57mm x 8.00mm) 10-DIP (0.600", 15.24mm) #commonpartslibrary #displaymodule #ledcharacter #numeric #red

WiFi Modules - 802.11 SMD Module, ESP32-S3FN8, 8 MB SPI Flash, PCB Antenna #CommonPartsLibrary #Wifi #module

Bluetooth, WiFi 802.11b/g/n/ax, Bluetooth v5.4 Transceiver Module 2.4GHz Integrated, Chip Surface Mount Silicon Labs SiWG917 module is our lowest power Wi-Fi 6 plus Bluetooth LE 5.4, ideal for ultra-low power IoT wireless devices using Wi-Fi®, Bluetooth, Matter, and IP networking for secure cloud connectivity. It is optimal for developing battery operated devices that need long battery life. SiWG917 module includes an ultra-low power Wi-Fi 6 plus Bluetooth Low Energy (LE) 5.4 wireless CPU subsystem, and an integrated micro-controller (MCU) application subsystem, security, peripherals and power management subsystem all in a single 16 x 21.1 x 2.3 mm package. The wireless subsystem consists of a multi-threaded Network Wireless Processor (NWP) running up to 160 MHz, baseband digital signal processing, analog front end, 2.4 GHz RF transceiver and integrated power amplifier. The application subsystem consists of an ARM® Cortex®-M4 running up to 180 MHz, embedded SRAM, flash, ultra-low power sensor hub, and matrix vector processor. The ARM® Cortex®-M4 is dedicated for peripheral and application-related processing, while the NWP runs the wireless and networking stacks on independent threads, thus providing a fully integrated solution that is ready for a wide range of embedded wireless IoT applications. The modules come with modular radio type approvals for various countries, including USA (FCC), Canada (IC/ISED) and Japan (MIC), and are in compliance with the relevant EN standards (including EN 300 328 v2.2.2) for the conformity with the directives and regulations in EU and UK. KEY FEATURES • Wi-Fi 6 Single Band 2.4 GHz 20 MHz 1x1 stream IEEE 802.11 b/g/n/ax • Bluetooth LE 5.4 • Single chip Matter Over Wi-Fi Solution • ARM® Cortex® M4 Processor with FPU subsystem up to 180 MHz with rich set of Digital and Analog Peripherals. • Wi-Fi 6 Benefits: TWT for improved efficiency and longer battery life, MUMIMO/OFDMA for Higher Throughput, network capacity and low latency • Best in Class Device and Wireless Security • WLAN Tx power up to +17.5 dBm with integrated PA • Bluetooth LE Tx power up to +17 dBm with integrated PA • WLAN Rx sensitivity as low as -95.5 dBm • Wi-Fi 4 Standby Associated mode current: 71 μA @ 1-second listen interval • Embedded Flash option up to 8 MB/ optional external Flash up to 16 MB • Embedded PSRAM option up to 2 MB/ optional external PSRAM option up to 16 MB • Ultra-low power sensor hub peripherals • Matrix Vector Processor (MVP) • Embedded Wi-Fi, Bluetooth LE, Matter, and networking stacks supporting wireless coexistence • Three software-configurable MCU application memory options for sharing the RAM between the wireless, system, and application (192/256/320 KB) • Operating temperature: -40 to +85 ºC • Operating supply range: 3.0 to 3.63 V • Supply voltage for GPIOs: 1.71 to 3.63 V #WiFi6 #BluetoothLE54 #IoTModule #WirelessSoC #SiliconLabs #EmbeddedSystems #SmartHome #IndustrialIoT #LowPowerDesign #RFModule #ConnectedDevices #EdgeComputing #MatterReady #PCBDesign #ElectronicsEngineering

RF Modules Wio-SX1262 Wireless Module (Bulk), SX1262 embedded, supports LoRa&LoRaWAN on EU868 & US915

Connector Header Through Hole 40 position 0.100" (2.54mm) Raspberry Pi 40 pin header The TSW-120-07-G-D is a through-hole, double-row vertical header manufactured by Samtec. It features 40 total positions (2 rows of 20 pins) with a standard 2.54 mm pitch. This connector is widely used for board-to-board connections, prototyping, and general-purpose signal routing in embedded and electronic systems. It is designed for reliable mechanical and electrical performance with gold-plated contacts for enhanced conductivity and corrosion resistance. Manufacturer Samtec Inc. Manufacturer Part Number TSW-120-07-G-D Product Type Through-Hole Pin Header Number of Positions 40 (2 × 20) Number of Rows 2 Pitch 2.54 mm (0.100") Row Spacing 2.54 mm (0.100") Mounting Type Through Hole Orientation Vertical Contact Material Phosphor Bronze Contact Plating Gold (Au) over Nickel Plating Thickness Typically 10 µin (0.25 µm) Gold Insulator Material Black Liquid Crystal Polymer (LCP) Current Rating Typically 3.0 A per contact (depending on application conditions) Voltage Rating Typically 250 VAC Operating Temperature Range -55°C to +125°C Termination Type Solder Contact Style Square Post Post Length Standard Samtec “-07” tail length (approx. 2.92 mm tail, varies slightly per datasheet) Applications Embedded systems (e.g., Raspberry Pi GPIO headers) Development boards and expansion modules Board-to-board interconnects Prototyping and test setups Compliance RoHS Compliant Lead-Free Notes Compatible with standard 2.54 mm female headers and sockets Commonly used in stacking or mezzanine configurations Available in various plating options and pin lengths under the TSW series #commonpartslibrary #connector

GSM & GPRS & GPS Modules 9.7X10.1mm RoHS

Display Modules - LED Character and Numeric Red 7-Segment 1 Character Common Cathode 2V 20mA 0.512" H x 0.386" W x 0.148" D (13.00mm x 9.80mm x 3.75mm) 10-SMD, No Lead #Commonpartslibrary #optoelectronic #LEDcharacter #module

8 (6 + 2) Position Card Connector NANO SIM Surface Mount, Right Angle Gold SIM card holder nano SIM The 2452796-1 is a surface-mount Nano SIM card connector from TE Connectivity designed for 4FF Nano SIM applications in cellular, IoT, GPS, and wireless communication devices. It features a hinged locking mechanism for secure card retention and reliable electrical contact in compact embedded systems. The connector is optimized for PCB mounting and supports high durability for repeated SIM card insertion and removal cycles. Key Features Supports 4FF (Nano SIM) cards Hinge-type SIM holder with locking mechanism 7-position contact configuration Surface-mount (SMT) PCB termination Integrated card detection switch Compact right-angle board-mount design Contact material made from copper alloy with gold plating Durable stainless-steel shell construction Operating temperature range: -40°C to +85°C Rated durability up to 2500 mating cycles Suitable for cellular modems, LTE modules, GPS trackers, and IoT devices UL 94V-0 flammability rated housing #CommonPartsLibrary #Connector #NANO SIM

2 Position Wire to Board Terminal Block Horizontal with Board 0.150" (3.81mm) Through Hole ## Engineering Specification ## General Description The **1727010** is a Phoenix Contact **MKDS series PCB terminal block** designed for secure wire-to-board electrical connection in printed circuit board assemblies. It provides a compact screw-clamp termination interface for connecting external conductors to PCB circuitry. The component is suitable for industrial electronics, automation equipment, control modules, power interfaces, instrumentation, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1727010** Manufacturer: **Phoenix Contact** Product Name: **MKDS 1/ 2-3,81** Product Series: **MKDS** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed PCB terminal block that allows external wires to connect directly to the printed circuit board. The screw-clamp mechanism provides both mechanical conductor retention and electrical continuity between the field wiring and PCB circuit. This makes the component suitable for applications where wiring must be secure, serviceable, and accessible during installation or maintenance. ## Mechanical Description The terminal block uses a compact housing with side-entry conductor access and through-hole solder pins for stable PCB attachment. Its construction supports organized wire routing and practical access for conductor insertion and screw tightening. The design is suitable for compact board layouts where reliable field wiring connection is required. ## Electrical Description The component is intended for signal and low-voltage power connection applications within the manufacturer’s specified electrical ratings. It provides stable electrical contact when used with compatible conductor sizes, correct wire preparation, and proper screw tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements that transfer current from the inserted conductor to the soldered PCB pins. The screw connection with tension sleeve helps maintain reliable contact pressure and secure conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1727010** is intended for through-hole solder mounting on a printed circuit board. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidance. The component should be positioned to allow safe wire insertion, screwdriver access, and adequate clearance from nearby components or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, power supply interfaces, relay boards, instrumentation equipment, sensor wiring interfaces, building control systems, communication hardware, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current requirement, voltage rating, tightening torque, creepage and clearance spacing, solder joint strength, wire routing, and service access. The terminal block should not be used beyond the manufacturer’s specified electrical, mechanical, or environmental limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkds #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

LED Driver IC 16 Output Linear PWM Dimming 25mA 5.5V 28-TSSOP PCA9685PW,118 is a 16-channel, 12-bit PWM LED controller with an I²C interface designed for LED dimming, RGB/RGBA lighting, and servo motor control applications. It provides independent PWM control for up to 16 outputs, allowing precise brightness or position control while minimizing MCU GPIO usage. The device supports Fast-mode Plus I²C communication up to 1 MHz and operates from a 2.3 V to 5.5 V supply range. It is commonly used in robotics, LED backlighting, automation systems, and PWM expansion modules for microcontrollers such as Arduino, ESP32, and Raspberry Pi. Key Features 16 independent PWM output channels 12-bit PWM resolution (4096 steps) Programmable PWM frequency from approximately 24 Hz to 1526 Hz I²C Fast-mode Plus compatible interface up to 1 MHz Six hardware address pins allowing up to 62 devices on one I²C bus Programmable open-drain or totem-pole outputs Output capability: 25 mA sink current 10 mA source current Internal 25 MHz oscillator with optional external clock input Individual programmable LED ON/OFF timing for reduced EMI and current surges Supports software reset and group addressing (All Call/Sub Call) 5.5 V tolerant inputs and outputs Operating voltage range: 2.3 V to 5.5 V Package: 28-pin TSSOP (PW suffix) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LEDdriver

20 Hz ~ 20 kHz Analog Microphone Electret Condenser 3 V ~ 10 V Omnidirectional (-44dB ±2dB) PC Pins JLI 140A HD microphone microphone capsule The CMA-4544PF-W is an electret condenser microphone designed for compact audio capture applications. It features high sensitivity, low noise characteristics, and stable frequency response, making it suitable for voice recording, communication devices, and embedded audio systems. The device integrates a permanently charged electret diaphragm with a built-in FET preamplifier, enabling reliable signal output with minimal external circuitry. Key Features Electret condenser microphone element High sensitivity and signal-to-noise ratio Omnidirectional pickup pattern Compact, low-profile package Built-in FET impedance converter Stable performance over temperature range RoHS compliant Electrical Characteristics Operating Voltage: typically 2.0 V (range: 1.5 V to 10 V) Current Consumption: typically 0.5 mA Sensitivity: typically -44 dB ±3 dB (at 1 kHz, 0 dB = 1 V/Pa) Signal-to-Noise Ratio: typically 60 dB Output Impedance: typically 2.2 kΩ Frequency Response: 20 Hz to 16 kHz Acoustic Characteristics Directivity: Omnidirectional Maximum Sound Pressure Level: typically 110 dB SPL Equivalent Noise Level: typically 34 dB SPL Mechanical Characteristics Package Type: Through-hole cylindrical metal can Dimensions: approximately 4.5 mm diameter × 4.4 mm height Mounting Type: PCB through-hole Terminal Configuration: Two-pin (signal and ground) Environmental Specifications Operating Temperature Range: -20°C to +70°C Storage Temperature Range: -40°C to +85°C Applications Voice recording devices Mobile and handheld electronics Intercom and communication systems Embedded audio input modules IoT and consumer electronics Pin Configuration Pin 1: Output (Vout) Pin 2: Ground (GND / Case) Compliance RoHS compliant Suitable for general consumer electronics use #commonpartslibrary #audio #microphone #analog #condenser