N-Channel 30 V 5.7A (Ta) 1.4W (Ta) Surface Mount SOT-23-3 The AO3400A N-Channel MOSFET is a 30V N-channel enhancement-mode MOSFET designed using trench MOSFET technology. It is widely used for load switching, DC-DC converters, motor driving, and PWM control applications due to its very low on-resistance and compact SOT-23 package. It is especially popular in small electronics and embedded systems because it can be driven directly by 3.3V or 5V logic signals, making it ideal for microcontroller-based designs. Key Features Drain-Source Voltage (VDS): 30V Continuous Drain Current (ID): up to 5.7A (at 25°C) Ultra-low RDS(on): ~26.5 mΩ @ VGS = 10V ~32 mΩ @ VGS = 4.5V ~48 mΩ @ VGS = 2.5V Logic-level gate drive (works well with MCU GPIOs) Fast switching performance (ns-range switching times) Low gate charge (~6–7 nC) → efficient switching Compact SOT-23 package for space-saving PCB design Low power dissipation (~1.4W typical at 25°C ambient) Operating temperature: −55°C to +150°C Typical Applications Load switching (LEDs, sensors, small motors) Power management in battery-powered devices DC-DC converters PWM control circuits Fan and heater control in embedded systems #AO3400A #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #LoadSwitch #EmbeddedSystems #ElectronicsComponents #TrenchMOSFET #Commonpartslibrary #Transistor #FET

Connector Header Surface Mount, Right Angle 4 position 0.039" (1.00mm) The SM04B-SRSS-TB (LF)(SN) is a JST SH/SR series 4-position wire-to-board connector header designed for compact, high-density PCB applications. It features a 1.0 mm pitch, right-angle surface-mount (SMT) design, and a shrouded housing for secure mating and alignment. This connector is commonly used in space-constrained electronic devices where reliable signal transmission and low-profile mounting are required, such as in consumer electronics, industrial control boards, and embedded systems. It mates with compatible JST SH series housings, providing a secure push-fit connection for crimped wire assemblies. Key Features 4-position (1x4) wire-to-board connector header 1.0 mm fine pitch for compact PCB layouts Surface-mount (SMT), right-angle configuration Shrouded design for improved alignment and protection Rated current: 1 A per contact Rated voltage: 50 V AC/DC Low-profile height (~2.9 mm) Tin-plated contacts for reliable conductivity Operating temperature: -25°C to +85°C Compatible with JST SH/SR series mating housings Tape-and-reel packaging for automated PCB assembly #CommonPartsLibrary #Connector #JST #SM04BSRSSTB #SHSeries #SRSeries #WireToBoard #1mmPitch #SMTConnector #PCBConnector #ElectronicsComponents #ConnectorHeader

MOSFET N-CH 20V 6.3A SOT-23 The IRLML6244TRPBF is an N-channel enhancement-mode power MOSFET from Infineon Technologies (originally International Rectifier HEXFET series). It is designed for low-voltage power switching applications such as load switching, DC-DC converters, and LED control. It comes in a compact SOT-23 (Micro3™) surface-mount package, making it suitable for space-constrained PCB designs while still handling relatively high current for its size. Key Features Drain-Source Voltage (VDS): 20 V Continuous Drain Current: up to ~6.3 A (at 25°C) Very low RDS(on): ~21 mΩ @ VGS = 4.5 V ~27 mΩ @ VGS = 2.5 V Low gate threshold voltage (~0.5–1.1 V typical range) (note: not a switching guarantee) Gate-to-source voltage rating: ±12 V Low power loss due to low on-resistance High efficiency switching for low-voltage systems Power dissipation: ~1.3 W (thermal limited in SOT-23 package) Fast switching performance (low gate charge ~8.9 nC) Operating temperature range: −55°C to +150°C RoHS compliant (lead-free, halogen-free) Typical Applications Low-side load switching (MCUs, GPIO control) LED strip / RGB LED drivers Battery-powered systems DC-DC converter switching Small motor or relay driving General-purpose power management in compact electronics Important Design Note Even though it has a low VGS(th), this MOSFET is not selected based on threshold voltage. What matters is the RDS(on) at your gate drive voltage (2.5 V / 3.3 V / 5 V) to ensure it fully turns on with minimal heating. #CommonPartsLibrary #Transistor #FET #IRLML6244 #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #Infineon #HEXFET #LEDDriver #LowSideSwitch #ElectronicsComponents

HoJLR2512-3W-5mR-1% is a low-resistance current sense resistor designed for high-power current measurement and power monitoring applications in embedded and industrial electronic systems. Constructed using precision metal alloy resistive material, the component provides stable resistance characteristics, low temperature coefficient, and high current handling capability for accurate current sensing under demanding operating conditions. This resistor is optimized for use in power management circuits, battery monitoring systems, motor control applications, DC-DC converters, automotive electronics, and industrial power distribution platforms. Its low resistance value minimizes power loss while enabling precise current measurement when used with amplifiers, ADCs, or dedicated current sensing circuitry. The HoJLR2512-3W-5mR-1% features a compact surface-mount package suitable for automated PCB assembly and high-density layouts. Its robust thermal performance and precision tolerance characteristics make it suitable for high-efficiency power systems requiring reliable current monitoring and overload detection functionality. #commonpartslibrary #currentsenseresistor #shuntresistor #powermanagement #passivecomponents #embeddedhardware #powersupply #industrialelectronics #surfacemountdevice #electronicscomponents

Wireless Power Receiver PMIC 20-VQFN (3.5x4.5) BQ51013BRHLT is a wireless power receiver integrated circuit from Texas Instruments designed for inductive power transfer applications compliant with wireless charging standards. The device integrates power rectification, voltage regulation, communication control, and protection circuitry to enable efficient wireless charging for portable and embedded electronic devices. This receiver IC is optimized for low-power wireless charging systems and supports seamless energy transfer from compatible transmitter platforms without the need for physical connectors. It provides regulated power output suitable for charging batteries and powering embedded systems while incorporating dynamic power management, foreign object detection support, thermal protection, and overvoltage protection for safe operation. The BQ51013BRHLT is widely used in wearable electronics, wireless sensor platforms, medical devices, mobile accessories, handheld products, and compact consumer electronics requiring cable-free charging capability. Its compact package and high integration level simplify PCB layout and reduce external component requirements for space-constrained wireless power designs. #commonpartslibrary #wirelesscharging #powermanagement #texasinstruments #wirelesspower #batterycharging #embeddedhardware #portableelectronics #electronicscomponents #inductivecharging