Welcome to your new project. Imagine what you can build here.

3 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #screwblock #connector #commonPartsLibrary

2 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole #Connector #Wire-board #TerminalBlock #Horizontal #THT

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole #simplifiedFootprint

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" Screw terminal 3-pin 5.08mm Through Hole #connector #terminalblock #tht

PCB terminal block; pitch 3.5mm; 2-ways; oblique entry; range wire 0.2-2.5mm2 (AWG 26-16) The DG250-3.5-02P-11-00A(H) is a 2-position PCB terminal block connector designed for secure wire-to-board connections. It uses a spring clamp (push-in) mechanism, allowing easy wire insertion and reliable electrical contact without screws. This connector is commonly used in: Power input terminals Signal wiring interfaces Industrial and embedded PCB applications It features a 3.5 mm pitch and a 45° angled entry, making it suitable for compact PCB layouts where space and cable routing are critical. Key Features Electrical Characteristics Rated Voltage: up to 400V Rated Current: up to 5A Mechanical & Connection Number of Pins: 2 (1×2 configuration) Pitch: 3.5 mm Mounting Type: Through-hole (THT) Wire Connection: Spring clamp / push button type No screwdriver required Wire Size: ~22–16 AWG (0.2–1.5 mm²) Physical Design Orientation: 45° angled (easier cable routing) Compact size: suitable for dense PCB layouts Body Material: Polyamide (PA66) Flammability Rating: UL94V-0 (fire-resistant) Contact & Reliability Contact Material: Phosphor bronze Plating: Tin-plated (good conductivity + corrosion resistance) Operating Temperature: −40 °C to +105 °C #commonpartslibrary #connector #terminalblock #tht

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2.5/ 2-G-5.08 CAN connector terminal block 2 pin The component is a two-position pluggable terminal block header designed for secure and reliable wire-to-board connections in industrial and embedded electronic systems. It is part of the COMBICON MSTB family, widely used for field wiring applications such as CAN bus, RS485, and power distribution. The device provides a robust interface between PCB circuitry and external wiring, supporting easy installation, maintenance, and replacement through a pluggable connection system. Mechanical Characteristics Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole PCB mount Orientation: Vertical (straight) Termination Style: Pin header for mating plug connector Housing Material: Polyamide (PA), high-temperature resistant Color: Green Electrical Characteristics Rated Voltage: Up to 250 V Rated Current: Up to 12 A Contact Material: Copper alloy Contact Plating: Tin plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94 V-0 Mating and Compatibility Compatible Plug Series: Phoenix Contact MSTB 2,5 series (e.g., 1757019) Connection Method (Plug Side): Screw clamp termination Wire Size Range: Typically accepts 24 AWG to 12 AWG (depending on mating plug) Standards and Compliance RoHS: Compliant UL Recognized: Yes IEC Compliance: Yes Application Notes The component is commonly used in industrial communication systems such as CAN bus networks where a reliable and removable connection is required for CANH and CANL signals. Its 5.08 mm pitch ensures adequate spacing for signal integrity and ease of wiring, while the pluggable design simplifies field servicing and module replacement. #connector #tht #terminalblock

Connector Header Through Hole 4 position 0.100" (2.54mm) UART header 1x4 2.54mm Single-row, through-hole male pin header with 4 positions and 2.54 mm pitch. Designed for board-to-wire or board-to-board interconnect applications such as UART interfaces. Mechanical Specifications Number of Positions: 4 Number of Rows: 1 Pitch: 2.54 mm (0.100") Mounting Style: Through Hole Mounting Angle: Straight (Vertical) Contact Gender: Male (Pin) Termination Type: Solder Pin Housing Material: Polybutylene Terephthalate (PBT) Housing Color: Black Electrical Specifications Current Rating: 4.3 A – 6.3 A (per pin, depending on conditions) Voltage Rating: 450 VAC – 550 VAC Contact Resistance: (Typical for series, not specified exact) Insulation Resistance: (Not specified) Material & Plating Contact Material: Phosphor Bronze Contact Plating: Gold Flammability Rating: UL94 V-0 Environmental & Compliance RoHS Compliance: Yes Country of Origin: USA Packaging Packaging Type: Bulk Factory Pack Quantity: 1 Series Information Series: TSW (Samtec Pin Strip Header Series) Product Type: Headers & Wire Housings Typical Applications UART / Serial communication headers Microcontroller programming interfaces General-purpose 2.54 mm interconnects Prototyping and development boards #commonpartslibrary #connector

Connector Header Through Hole 6 position 0.100" (2.54mm) The 640456-6 is a 6-position, single-row wire-to-board header connector from TE Connectivity (AMP series), designed for reliable power and signal connections in a wide range of electronic applications. It features a 2.54 mm pitch and through-hole mounting for strong mechanical retention and ease of assembly. The connector is commonly used with matching crimp housings and terminals, providing a secure and serviceable interconnect solution for PCB-based systems. Key Features 6-position (1x6) header connector 2.54 mm pitch spacing Through-hole mounting (THT) Vertical (top-entry) orientation Friction-lock compatible with mating housings Tin-plated contacts for good conductivity and corrosion resistance Durable thermoplastic housing Mechanical Characteristics Mounting Type: Through Hole Orientation: Vertical (Top Entry) Pitch: 2.54 mm Number of Positions: 6 Row Configuration: Single row Mating Type: Friction fit with compatible housing Termination Type: Solder tails Electrical Characteristics Rated Current: Up to 3 A per contact (depending on wire gauge) Rated Voltage: 250 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Withstanding Voltage: 1,000 VAC Material Specifications Housing: Thermoplastic, UL94V-0 rated Contacts: Copper alloy Contact Plating: Tin over nickel Environmental Specifications Operating Temperature Range: -40°C to +105°C Storage Temperature: -40°C to +105°C Packaging Information Packaging Type: Bulk or tray (varies by supplier) RoHS Compliant: Yes Lead-Free: Yes Compatible Components Mating Housing: TE Connectivity compatible crimp housings (e.g., AMP series) Crimp Terminals: соответствующие crimp contacts for 2.54 mm systems Typical Applications PCB interconnects Consumer electronics Industrial control systems Power and signal distribution Prototyping and development boards #CommonPartsLibrary #Connector #Header #Male-pins #MTA-100

4 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole #commonpartslibrary #connector #terminalblock #tht

2 Position Wire to Board Terminal Block Through Hole 5.08mm #CommonPartsLibrary #Connector #Terminal-block

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole screw terminal 2 pin 3.5mm This component is a printed circuit board mounted screw terminal block designed to provide a secure and serviceable wire-to-board connection. It accommodates two conductors and uses a screw clamp mechanism to ensure reliable electrical and mechanical contact. The compact 3.5 mm pitch makes it suitable for space-constrained designs while maintaining adequate creepage and clearance distances for low-voltage applications. The terminal is intended for through-hole mounting and supports field wiring without the need for specialized tools, making it appropriate for industrial control systems, power distribution modules, and general-purpose electronic assemblies. Mechanical Characteristics: The terminal block is constructed with a high-temperature thermoplastic housing that provides mechanical strength and electrical insulation. The housing is typically green in color and designed for side-entry wire insertion. The clamping system uses metal screws and pressure plates to secure stripped wire ends. The component is designed for through-hole PCB mounting with soldered pins providing structural stability. The form factor supports modular placement along the PCB edge for accessible wiring. Electrical Characteristics: The device is designed for low to moderate voltage and current applications typical of signal and power connections in control electronics. Conductive elements are made from metal alloys with appropriate plating to ensure good conductivity and resistance to corrosion. The screw clamp connection provides stable contact resistance under vibration and thermal cycling conditions. Material and Environmental Characteristics: The insulating body is made from flame-retardant thermoplastic material compliant with relevant safety standards. The component is suitable for standard operating temperature ranges encountered in industrial and commercial electronics. Materials are selected to meet common environmental and regulatory requirements such as RoHS compliance. Application Considerations: This terminal block is intended for applications requiring reliable field wiring connections, ease of maintenance, and secure termination. It is commonly used in power supplies, control panels, interface modules, and embedded systems. Proper PCB footprint design and adherence to recommended soldering practices are required to ensure optimal performance and reliability. #CommonPartsLibrary #Connector #Terminal-Block #WR-TBL Series 1377

2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Through Hole, Kinked Pin #CommonPartsLibrary #Connector #TerminalBlock #Wire-Board #2834011

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #commonpartslibrary #connector #terminalblock #tht

3 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) pin header 1x03 2.54mm Component Type: Pin Header Product Category: Headers & Wire Housings Series: WR-PHD Brand: Würth Elektronik Electrical Specifications Voltage Rating: 250 V Current Rating: 3 A Insulation Resistance: 1 GΩ Mechanical Specifications Number of Positions: 3 Number of Rows: 1 Pitch: 2.54 mm (0.1 in) Mounting Style: Through Hole Mounting Orientation: Right Angle Termination Type: Solder Pin Contact Type: Male Pin Mating Post Length: 6 mm (0.236 in) Termination Post Length: 3 mm (0.118 in) Material Specifications Contact Material: Copper Alloy Contact Plating: Gold Housing Material: Polyamide (PA) Housing Color: Black Environmental Specifications Operating Temperature (Min): -40 °C Operating Temperature (Max): +105 °C Flammability Rating: UL 94 V-0 Application Application Type: Board-to-Board Packaging & Miscellaneous Packaging: Bulk Factory Pack Quantity: 1000 Country of Origin: Taiwan Unit Weight: 0.006702 oz pin header 1x3 2.54mm #commonpartslibrary #connector

2 Position Wire to Board Terminal Block Horizontal with Board 0.100" (2.54mm) Through Hole #commonpartslibrary #connector #terminalblock

Connector Header Through Hole 2 position 0.100" (2.54mm) Component Type: Pin Header Product Category: Headers & Wire Housings Series: WR-PHD Brand: Würth Elektronik Electrical Specifications Voltage Rating: 250 V Current Rating: 3 A Insulation Resistance: 1 GΩ Mechanical Specifications Number of Positions: 2 Number of Rows: 1 Pitch: 2.54 mm (0.1 in) Mounting Style: Through Hole Mounting Orientation: Straight Termination Type: Solder Pin Contact Type: Male Pin Mating Post Length: 6 mm (0.236 in) Termination Post Length: 3 mm (0.118 in) Latching Type: Unlatched Material Specifications Contact Material: Copper Alloy Contact Plating: Gold Housing Material: Polybutylene Terephthalate (PBT) Housing Color: Black Environmental Specifications Operating Temperature (Min): -40 °C Operating Temperature (Max): +105 °C Flammability Rating: UL 94 V-0 Application Application Type: Board-to-Board Packaging & Miscellaneous Packaging: Bulk Factory Pack Quantity: 1000 Country of Origin: Taiwan Unit Weight: 0.003880 oz #commonpartslibrary #connector #header

2 Position Board Side/Socket - Closed 5.08mm Pitch Right-Angle Pin The WJ2EDGRC-5.08-02P-14-00A is a 2-position pluggable terminal block (screw-type connector) with a 5.08 mm pitch, commonly used for PCB power and signal connections. It is part of the EDGRC series designed for reliable wire-to-board connectivity in industrial, automation, and power electronics applications. It allows secure cable termination using screw clamps and is designed for easy plug-in/out mating with a corresponding header on a PCB. Key Features Type: Pluggable terminal block (female plug) Pin count: 2 positions Pitch: 5.08 mm Connection method: Screw clamp / rising cage clamp Mounting style: Through-hole (mates with PCB header) Wire termination: Suitable for solid and stranded wires High reliability contact design for stable electrical connection Detachable plug-in design for easy maintenance and replacement High current capability (typical for 5.08 mm pitch terminal blocks) Industrial-grade insulation material for durability and safety Wide usage: Power supply input, motor control, industrial I/O, and general PCB wiring #CommonPartsLibrary #Connector #Terminal block

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole The 1730405 is a PCB terminal block from Phoenix Contact, belonging to the MKDS 2,5 series. It is designed for secure screw-type wire-to-board connections, commonly used in industrial control systems, power distribution, and PCB interface applications. This component provides a reliable mechanical and electrical connection between wires and printed circuit boards (PCB) with a standard 5.08 mm pitch. Key Features 3-position PCB terminal block Compact single-row configuration for signal or power connections Screw connection technology Secure and vibration-resistant wire termination Standard 5.08 mm pitch Compatible with common industrial PCB layouts Rated electrical performance Nominal voltage up to 400 V Nominal current up to 24 A (with proper conductor size) Wire compatibility Solid and stranded wires: 0.14 mm² to 2.5 mm² AWG range: approximately 30–12 AWG High insulation rating Insulating material: PA (Polyamide) Flame class: UL 94 V-0 High surge voltage capability Up to 4 kV surge rating Through-hole PCB mounting Designed for soldering into PCB for stable mechanical retention Industrial-grade durability Suitable for harsh environments and long-term use Typical Applications Industrial automation systems Power supply and distribution boards Control panels Embedded PCB wiring interfaces Electrical instrumentation systems 1x3 terminal block #CommonPartsLibrary #Connector #Terminal block

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #commonpartslibrary #connector #terminalblock #tht

3 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #screwblock #connector #commonPartsLibrary

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole #CommonPartsLibrary #Connector #Terminal-block #Wire-Board #COMBICON-MKDSN