The modules makes it simple to use with microcontroller's UART to to create bidirectional RS485 networks. #RS485-TTL #Module

The NE555 devices are precision timing circuits capable of producing accurate time delays or oscillation. In time-delay or monostable operating modes, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle are controlled independently with two external resistors and a single external capacitor. Each timer has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage pin (CONT). When the trigger input (TRIG) is less than the trigger level, the flip-flop is set and the output goes high. If TRIG is greater than the trigger level and the threshold input (THRES) is greater than the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) overrides all other inputs and is used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a lowimpedance path is provided between the discharge pin (DISCH) and the ground pin (GND). Tie all unused inputs to an appropriate logic level to prevent false triggering. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. Features - Timing from microseconds to hours - Astable or monostable operation - Adjustable duty cycle - TTL-compatible output can sink or source up to 200mA - On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. Applications - Pulse-shaping circuits - Missing-pulse detectors - Pulse-width modulators - Pulse-position modulators - Sequential timers - Pulse generators -F requency dividers - Industrial controls

555 Type, Timer/Oscillator (Single) IC 2.1MHz 8-SOIC The TLC555IDR is a low-power CMOS timer device designed as a functional replacement for the standard bipolar 555 timer while providing significantly reduced supply current and improved operating efficiency. The device supports both astable and monostable operating modes and is commonly used for timing generation, pulse shaping, oscillation, PWM generation, delay circuits, and frequency generation applications. The CMOS architecture enables low power consumption, rail-to-rail output capability, and stable timing performance over a wide operating voltage range. The device is suitable for battery-powered systems, portable electronics, industrial controls, instrumentation, consumer products, and embedded electronic designs. The TLC555IDR is supplied in a compact SOIC surface-mount package intended for automated PCB assembly and space-constrained applications. Electrical Characteristics CMOS low-power timer architecture Functional equivalent to standard 555 timer devices Wide operating supply voltage range Low quiescent supply current High input impedance Rail-to-rail output swing capability Stable threshold and trigger levels Compatible with TTL and CMOS logic levels Capable of astable and monostable operation Adjustable duty cycle and frequency operation High output drive capability for direct interfacing Low noise and improved switching performance compared to bipolar 555 timers Functional Features Precision timing generation Oscillator and clock generation Pulse-width modulation support One-shot pulse generation Delay timer implementation Missing pulse detection Frequency divider implementation Sequential timing control LED flashing and tone generation PWM motor and power control applications Package Information Surface-mount SOIC package Standard tape-and-reel packaging format Compact footprint for automated assembly RoHS compliant device construction Environmental and Operating Conditions Industrial operating temperature range ESD protection handling required Suitable for commercial and industrial embedded systems Designed for low-power electronic applications Typical Applications Timer circuits Pulse generators Oscillators PWM controllers LED flashers Alarm and tone generators Frequency generators Power management timing Embedded control systems Portable battery-powered electronics #commonpartslibrary #integratedcircuit #timer #oscillator

Comparator General Purpose CMOS, DTL, ECL, MOS, Open-Collector, TTL 8-SOIC #CommonPartsLibrary #Integratedcircuit #Linearcomparator

CMOS BCD-to-7-Segment LED Latch Decoder Drivers 16-TSSOP -55 to 125 The CD4511BPWR is a CMOS BCD-to-7-segment latch decoder/driver IC from Texas Instruments designed to directly drive common-cathode 7-segment LED displays. It converts a 4-bit BCD (Binary-Coded Decimal) input into the appropriate 7-segment output signals for displaying decimal digits 0–9. The device integrates latch, decode, and display driver functions in a single package, making it suitable for digital clocks, counters, panel meters, calculators, and embedded display systems. Key Features CMOS BCD-to-7-segment latch decoder/driver Directly drives common-cathode LED displays High output source current capability up to 25 mA Built-in input latch for BCD data storage Lamp Test (LT) function for display testing Blanking Input (BI) for display blanking/intensity control Automatically blanks invalid BCD inputs (>1001) Wide operating supply voltage range: 3 V to 18 V Low static power consumption with high noise immunity Compatible with CMOS, NMOS, and TTL logic levels Available in TSSOP-16 package (BPWR variant) #commonpartslibrary #integratedcircuit #leddriver

Comparator General Purpose CMOS, Open-Collector, TTL 14-SOIC #CommonPartsLibrary #Integratedcircuit #Linearcomparator

Schottky TTL; Ten-four input NAND gate; 16-Lead PDIP; 7 V; 1mA; 2V; 0.8V #commonpartslibrary #integratedcircuit #decoder

Multiplexer, LS Series, 1-Func, 8 Line Input, 1 Line Output, Complementary Output, TTL, PDIP16 #commonpartslibrary #integratedcircuit #multiplexer

Comparator with Latch CMOS, Complementary, TTL 8-SOIC #CommonPartsLibrary #Integratedcircuit #Linearcomparator

The LM339B and LM2901B devices are the next generation versions of the industry-standard LM339 and LM2901 comparator family. These next generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM339B and LM2901B can drop-in replace the LM239, LM339 and LM2901, for both "A" and "V" grades. All devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Quiescent current is independent of the supply voltage. • NEW LM339B and LM2901B • Improved specifications of B-version – Maximum rating: up to 38V – ESD rating (HBM): 2kV – Low input offset: 0.37mV – Low input bias current: 3.5nA – Low supply-current: 200µA per comparator – Faster response time of 1µsec – Extended temperature range for LM339B • B-version is drop-in replacement for LM239, LM339 and LM2901, A and V versions • Common-mode input voltage range includes ground • Differential input voltage range equal to maximumrated supply voltage: ±38V • Low output saturation voltage • Output compatible with TTL, MOS, and CMOS • For single version, see the TL331B • For dual version, see the LM393B or LM2903B #CommonPartsLibrary #IntegratedCircuit #Comparator

Comparator General Purpose CMOS, DTL, ECL, MOS, Open-Collector, TTL 8-PDIP #CommonPartsLibrary #Integratedcircuit #Linearcomparator