Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, USB FS, LCD, ext. SMPS #Microcontrollers #stm32 #commonpartslibrary

LED Drivers, AC/DC SMPS For For AC/DC Converters SMPS Transformer 4500Vrms Isolation 68 ~ 120kHz Surface Mount #commonpartslibrary #transformer #leddriver #acdc #converter

N-Channel 100 V 100A (Tc) 2.5W (Ta), 139W (Tc) Surface Mount PG-TDSON-8-7 BSC040N10NS5ATMA1 is a high-performance 100V N-Channel Power MOSFET from Infineon's OptiMOS™ 5 family. It is designed for high-efficiency switching applications such as switched-mode power supplies (SMPS), synchronous rectification, DC-DC converters, motor drives, battery-powered systems, and industrial power management. The device features extremely low on-resistance, high current capability, and excellent thermal performance, making it suitable for demanding power conversion applications. Key Features N-Channel Enhancement Mode MOSFET 100V Drain-to-Source Voltage (VDS) Ultra-low RDS(on): 4.0 mΩ max @ VGS = 10V Continuous Drain Current up to 100A (package limited) Optimized for high-performance SMPS and synchronous rectification Low gate charge for improved switching efficiency 100% avalanche tested for enhanced robustness Superior thermal resistance and power dissipation Wide operating junction temperature range: -55°C to +150°C RoHS compliant and halogen-free Compact PG-TDSON-8 / SuperSO8 package for high power density designs Typical Applications DC-DC Converters Synchronous Rectifiers Motor Control Battery Management Systems (BMS) Telecom and Industrial Power Supplies Solar Power Systems High-Current Switching Circuits #Infineon #OptiMOS5 #MOSFET #NChannelMOSFET #PowerMOSFET #100V #LowRDSon #SMPS #DCDCConverter #MotorDrive #PowerElectronics #IndustrialElectronics #BSC040N10NS5ATMA1 #HighEfficiency #SynchronousRectification

Forward, Push-Pull Converters For For DC/DC Converters SMPS Transformer 3125Vrms Isolation 10kHz Surface Mount #Transformers #Switching-Converter #SMPS-Transformer #WE-PP, MID-PPTI

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, USB FS, LCD, ext. SMPS #Microcontrollers #stm32 #commonpartslibrary

Diode 40 V 3A Surface Mount SMB Schottky diode 3A 40V SMB The B340B-13-F is a surface-mount Schottky barrier rectifier diode designed for efficient power rectification in low-voltage, high-frequency applications. It features low forward voltage drop and fast switching capability, making it suitable for DC-DC converters, power supplies, reverse polarity protection, and freewheeling diode applications. The device is housed in a compact SMB (DO-214AA) package, enabling high current handling in space-constrained designs. ELECTRICAL CHARACTERISTICS Reverse Voltage (VRRM): 40 V Average Forward Current (IF(AV)): 3 A Forward Voltage (VF): 0.5 V (typical at IF = 3 A) Reverse Leakage Current (IR): 0.5 mA (max at VR = 40 V, 25°C) Peak Surge Current (IFSM): 80 A (8.3 ms single half sine wave) THERMAL CHARACTERISTICS Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Thermal Resistance Junction-to-Ambient (RθJA): ~75 °C/W MECHANICAL CHARACTERISTICS Package Type: SMB (DO-214AA) Mounting Type: Surface Mount (SMD) Polarity: Cathode marked by band Weight: ~0.1 g FEATURES Low forward voltage drop for improved efficiency High surge current capability Fast switching speed Low power loss and high reliability Compact SMB package for space-saving PCB layout RoHS compliant and halogen-free APPLICATIONS Switch-mode power supplies (SMPS) DC-DC converters Reverse polarity protection circuits Freewheeling and clamping diodes Battery charging circuits MANUFACTURER / PART DETAILS Manufacturer: Diodes Incorporated Part Number: B340B-13-F Package Code: SMB (DO-214AA) #Diode #Rectifier #Single-Diode #SCHOTTKY #B340

Flyback Converters For For DC/DC Converters SMPS Transformer 4000Vrms Isolation Surface Mount XFMR FLYBACK DC/DC CONV 14UH SMD

SMPS Transformer – Through-hole switching converter transformer for Power over Ethernet (PoE) DC/DC converters, optimized for the Texas Instruments TPS2373. Features 40 V to 57 V primary voltage, 12 V auxiliary winding, 100 µH inductance (at 10 kHz), and supports 200 kHz to 700 kHz switching frequency. Specified for operation over a −40°C to +125°C temperature range with a planar ER19 construction. #WurthElektronik #750343576 #SMPSTransformer #PoE #PowerOverEthernet #DCDCConverter #PowerTransformer #SwitchingTransformer #TPS2373 #ThroughHole #EmbeddedSystems

Schottky Barrier Rectifier Diode – 3 A Schottky rectifier diode optimized for switch-mode power supplies (SMPS), DC-DC converters, reverse polarity protection, freewheeling, OR-ing circuits, and general power management applications. Features a 60 V repetitive peak reverse voltage (VRRM), 3 A average forward current (IF(AV)), and 750 mV maximum forward voltage drop at 3 A for high-efficiency, low-loss operation. Offers fast switching performance, 500 µA maximum reverse leakage current at 60 V, 100 A non-repetitive surge current (IFSM), and an integrated Schottky barrier structure for improved efficiency and reduced power dissipation. Rated for operation over a −55°C to +150°C junction temperature range and housed in a DO-214AB (SMC) surface-mount package. #Vishay #SS36E39AT #SS36 #SchottkyDiode #Rectifier #PowerDiode #SMPS #DCDCConverter #ReversePolarityProtection #PowerManagement #SMC #EmbeddedSystems

Flyback Converters For For DC/DC Converters SMPS Transformer 1500Vrms Isolation 50 ~ 200kHz Surface Mount #CommonPartsLibrary #transformer #Switching-converter #MID-FLYLT

39 mH @ 10 kHz 2 Line Common Mode Choke Through Hole 300mA DCR The 744821039 is a common mode choke (CMC) designed for power line filtering. It is used to suppress electromagnetic interference (EMI), particularly common-mode noise in AC/DC power circuits and switching power supplies. Type: Common mode choke (power line filter) Inductance: 39 mH @ 10 kHz Rated current: 300 mA Number of lines: 2-line configuration Mounting: Through-hole (radial/vertical, 4 pins) AC voltage rating: up to 250 V DC resistance: ~3 Ω max Operating temperature: −40°C to +125°C Blocks high-frequency noise on power lines Allows normal differential current (useful signal) to pass Improves EMC compliance of electronic systems Reduces radio interference (RFI) in circuits AC/DC power supply input filters Switch-mode power supplies (SMPS) Industrial electronics and motor drives Household appliances and embedded systems Devices without proper grounding (noise suppression) #CommonPartsLibrary #Inductor #WE-CMB

Forward, Push-Pull Converters For For DC/DC Converters SMPS Transformer 2500Vrms Isolation 400kHz Surface Mount #CommonPartsLibrary #Transformer #Switching-Converter #SMPS-Transformer

Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A 8-SOIC (0.154", 3.90mm Width) # L6982N33DR ## General Description The L6982N33DR is a high-efficiency synchronous step-down switching regulator manufactured by STMicroelectronics. It is designed to provide a fixed regulated output voltage from a wide input voltage range while maintaining excellent conversion efficiency and low power dissipation. The device integrates high-side and low-side power MOSFETs, control circuitry, protection features, and compensation functions within a compact package, reducing external component count and simplifying power supply design. Its robust architecture makes it suitable for industrial automation systems, distributed power architectures, telecommunications equipment, embedded systems, consumer electronics, smart devices, and battery-powered applications requiring efficient DC-to-DC voltage conversion. ## Key Features ### Power Conversion Architecture * Synchronous buck regulator topology * Fixed output voltage regulation * Integrated power MOSFETs * High-efficiency power conversion * Optimized switching performance * Reduced external component requirements ### Electrical Characteristics * Wide input voltage operating range * Stable output voltage regulation * High conversion efficiency * Low standby power consumption * Fast transient response * Low output ripple performance ### Control Features * Current-mode control architecture * Internal compensation circuitry * Soft-start functionality * Frequency synchronization capability * Stable operation under varying load conditions ### Protection Features * Overcurrent protection * Short-circuit protection * Thermal shutdown protection * Undervoltage lockout protection * Safe startup operation * Enhanced system reliability ### Power Management * Low-power operating modes * Energy-efficient design * Suitable for battery-powered systems * Optimized thermal performance * Reduced power dissipation ### Package Characteristics * Surface-mount package * Compact footprint * Automated assembly compatible * High-density PCB design support * Industrial-grade packaging ### Material Construction * Monolithic integrated power management solution * Lead-free package materials * RoHS-compliant construction * High-reliability semiconductor technology ### Environmental Characteristics * Suitable for industrial operating environments * Long operational service life * Reliable continuous operation * Robust thermal performance ### Application Areas * Industrial Automation Equipment * Embedded Systems * Microcontroller Power Supplies * FPGA and Processor Power Rails * Telecommunications Equipment * Smart Metering Systems * Consumer Electronics * Building Automation Systems * Distributed Power Architectures * Battery-Powered Devices * IoT Products * Power Management Modules ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Power Management Solution ## Manufacturer STMicroelectronics ## Product Family L6982 Synchronous Step-Down Switching Regulator Series #L6982N33DR #STMicroelectronics #BuckConverter #DCtoDCConverter #SwitchingRegulator #PowerManagement #PowerSupplyDesign #EmbeddedSystems #IndustrialElectronics #VoltageRegulator #PowerElectronics #IoTDevices #ElectronicsEngineering #PCBDesign #SMPS

2.2µH Unshielded Molded Inductor 17 A 3.7mOhm 2-SMD, J-Lead The MPL-AY1265-2R2 is a 2.2 µH surface-mount molded power inductor from Monolithic Power Systems (MPS). It is designed for high-current DC-DC switching power supplies and power management applications requiring low DC resistance (DCR), high efficiency, and stable inductance over a wide operating temperature range. Its molded construction minimizes audible noise and provides excellent mechanical reliability for compact, high-performance electronic designs. Key Features 2.2 µH inductance with ±20% tolerance High rated current: up to 17 A Low DC resistance: 3.7 mΩ typ. (4.3 mΩ max.) Soft saturation characteristics for improved reliability Molded construction for enhanced durability and reduced EMI Low audible noise during switching operation Stable performance across a wide temperature range Operating temperature: −40°C to +155°C Compact SMD package: 13.5 × 12.6 × 6.2 mm RoHS/REACH compliant and halogen-free Typical Applications Battery-powered devices Portable electronics Embedded computing systems High-current switching mode power supplies (SMPS) High-frequency DC-DC converters Point-of-load (POL) converters FPGA power rails #MoldedInductor #PowerInductor #2_2uH #HighCurrent #LowDCR #SMPS #DCDCConverter #PowerManagement #SMD #MonolithicPowerSystems #RoHS #EmbeddedSystems

Forward, Push-Pull Converters For For DC/DC Converters SMPS Transformer 2250VDC Isolation 200kHz Surface Mount #Transformer #Switching-Converter #SMPS-Transformer #EP13Plus

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, USB FS, LCD, ext. SMPS #Microcontrollers #stm32 #commonpartslibrary

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 150DMIPS, up to 2MB Flash, 640KB SRAM, LCD-TFT & MIPI DSI, ext. SMPS #Microcontrollers #stm32 #commonpartslibrary