SH Series 2 Position 1 mm Pitch Surface Mount Side Entry Shrouded Header

4.2A Id, 100V Vds, 62mOhm Rds, N-Channel MOSFET, DirectFET SH N-Channel MOSFET DirectFET*SH*

JST SH series connector #CommonPartsLibrary #Connector #Header #Generic-Connector #SH-BMO4 #SMD #4pos

1x4P 4P SH Tin 4 -25℃~+85℃ 1A 1 1mm Copper alloy Standing paste SMD,P=1mm Wire To Board Connector ROHS BM04B-SRSS-TB(LF)(SN) CONN-SMD_BM04B-SRSS-TB LCSC Part Number: C160390 JLCPCB Part Class: Extended Part Manufactured by JST

JST SM04B-SRSS-TB(LF)(SN) is a 4-position, 1.0 mm pitch, right-angle surface-mount JST SH PCB connector commonly used for STEMMA QT and Qwiic I²C connections. Keywords: SM04B-SRSS-TB, JST SH, 4-pin connector, 1.0mm pitch, STEMMA QT Qwiic The SM04B-SRSS-TB (LF)(SN) is a JST SH/SR series 4-position wire-to-board connector header designed for compact, high-density PCB applications. It features a 1.0 mm pitch, right-angle surface-mount (SMT) design, and a shrouded housing for secure mating and alignment. This connector is commonly used in space-constrained electronic devices where reliable signal transmission and low-profile mounting are required, such as in consumer electronics, industrial control boards, and embedded systems. It mates with compatible JST SH series housings, providing a secure push-fit connection for crimped wire assemblies. Key Features 4-position (1x4) wire-to-board connector header 1.0 mm fine pitch for compact PCB layouts Surface-mount (SMT), right-angle configuration Shrouded design for improved alignment and protection Rated current: 1 A per contact Rated voltage: 50 V AC/DC Low-profile height (~2.9 mm) Tin-plated contacts for reliable conductivity Operating temperature: -25°C to +85°C Compatible with JST SH/SR series mating housings Tape-and-reel packaging for automated PCB assembly #CommonPartsLibrary #Connector #JST #SM04BSRSSTB #SHSeries #SRSeries #WireToBoard #1mmPitch #SMTConnector #PCBConnector #ElectronicsComponents #ConnectorHeader

1.3 Inch IIC I2C OLED Display Module 128x64 Pixel SH1106

Generic 10 pin (2x5) through-hole header for e.g. IDC ribbon cable connections

Connector header for wire-to-board interconnection, providing a 2-position, side-entry surface-mount interface compatible with the JST PH Series 2.0 mm pitch connector system. It is rated for 100 V AC/DC and 2 A, and features a shrouded right-angle SMT design with hold-down solder tabs for PCB mounting. #Connector #WireToBoard #Header #JST #PHSeries #2mmPitch #SMT #RightAngle #2Position #100V #2A

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2.5/ 2-G-5.08 CAN connector terminal block 2 pin PCB header for providing a pluggable wire-to-board connection in the COMBICON MSTB 2.5 system. It features 2 positions with a 5.08 mm pitch, a nominal current rating of 12 A, a rated voltage of 320 V (III/2), tin-plated contacts, linear pin layout, and through-hole wave-solder mounting with the plug-in direction parallel to the PCB. #Connector #TerminalBlock #PCBHeader #ThroughHole #PhoenixContact #COMBICON

JST PH Connector Header Through Hole 3 position 0.079" (2.00mm) The B3B-PH-K-S(LF)(SN) is a 3-position, 2.0 mm pitch, through-hole (THT) male header from the JST PH series, designed for wire-to-board connections. It is a top-entry, shrouded connector that mates with JST PH crimp housings, commonly used for compact internal wiring in electronic devices such as consumer electronics, battery connections, and embedded systems. This connector is optimized for high-density PCB layouts, offering a reliable and secure connection with a locking mechanism and low contact resistance. Key Features Mechanical 3 positions (3-pin) 2.0 mm pitch (compact spacing) Through-hole mounting (THT) Top-entry / vertical orientation Shrouded header (prevents misalignment) Detent lock / friction lock for secure mating Electrical Rated current: up to 2A per pin Rated voltage: up to 100V AC/DC Low contact resistance (~10 mΩ max initial) High insulation resistance (≥1000 MΩ) Environmental Operating temperature: -25°C to +85°C Design & Reliability Fully shrouded design → protects pins and ensures proper insertion Reliable contact structure with dimpled contacts for stable connection PCB retention mechanism → improves mechanical stability Tin-plated contacts for good conductivity and solderability Application Use Commonly used for: Battery connectors Sensor modules Embedded systems (e.g., microcontroller boards) Consumer electronics internal wiring Power + signal low-current connections #commonpartslibrary #connector #header #tht

6-Pin AVR ISP Connector for Programmer with pinout text on footprint. Connector Header Through Hole 6 position 0.100" (2.54mm), Shrouded - 4 Wall

3 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2,5/ 3-G-5.08 #connector #tht #terminalblock

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.197" (5.00mm) Vertical Through Hole #Commonpartslibrary #connector #terminalblock #header #tht

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.150" (3.81mm) 90°, Right Angle Through Hole#commonpartslibrary #connector #terminalblock #malepin #tht

Connector Header Through Hole 10 position 0.100" (2.54mm), Shrouded - 4 Wall

Atmel 10-pin JTAG connector with text pinout on footprint, Header Through Hole 10 position 0.100" (2.54mm), Shrouded - 4 Wall

6-Pin AVR PDI (Program and Debug Interface) Connector for Programmer. Connector Header Through Hole 6 position 0.100" (2.54mm), Shrouded - 4 Wall