Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C3-WROOM-02-N4 is a compact, general-purpose Wi-Fi and Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-C3 SoC and integrates RF components, crystal oscillator, flash memory, and PCB antenna in a single module. It is designed for a wide range of applications such as IoT devices, smart home systems, industrial automation, and consumer electronics, offering a balance of performance, low power consumption, and cost efficiency. Key Features MCU & Memory 32-bit RISC-V single-core processor up to 160 MHz 384 KB ROM 400 KB SRAM + 8 KB RTC SRAM Integrated 4 MB SPI flash (N4 variant) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Supports Station, SoftAP, and Station + SoftAP modes Bluetooth 5 (BLE) with mesh support Data rates up to 150 Mbps (Wi-Fi) Peripherals & Interfaces Up to 15 GPIOs Interfaces: SPI, UART, I2C, I2S LED PWM ADC (SAR) Timers & watchdog USB Serial/JTAG support TWAI® (CAN 2.0 compatible) #commonpartslibrary #transceiver #module #wireless #rf

Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios. #SeeedStudio #xiao

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

400KB 1 2 -40℃~+105℃ 3V~3.6V RISC-V 2@x12bit 160MHz 3 22 1 QFN-32(5x5) Microcontroller Units (MCUs/MPUs/SOCs) ROHS

802.15.4 Bluetooth, Wi-Fi Bluetooth v5.0, ZigBee® Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N4 is based on the ESP32-C6 single-core RISC-V microcontroller, integrating advanced wireless standards and secure connectivity in a small module format. It is designed for next-generation IoT devices that require Wi-Fi 6 efficiency, mesh networking, and Bluetooth Low Energy support. Processor: 32-bit RISC-V single-core CPU (up to 160 MHz) Wireless Connectivity: Wi-Fi 6 (802.11ax, 2.4 GHz) Bluetooth LE 5.0 IEEE 802.15.4 (Thread / Zigbee support) Memory (N4 variant): 4 MB Flash Security: Secure boot Flash encryption Cryptographic hardware acceleration #commonpartslibrary #rf #wireless #transceiver #module #zigbee

Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios. #SeeedStudio #xiao

802.15.4, Bluetooth, WiFi Bluetooth v5.0, Zigbee Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N8 integrates a 32-bit RISC-V single-core processor running up to 160 MHz, along with 8 MB of embedded SPI flash memory. It supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band for improved efficiency and lower latency Bluetooth Low Energy (BLE 5) for short-range communication IEEE 802.15.4 for protocols such as Thread and Zigbee The module features a built-in PCB antenna, RF circuitry, crystal oscillator, and passive components, making it a complete solution that simplifies hardware design. It provides a wide range of GPIO pins and peripheral interfaces such as UART, SPI, I2C, PWM, ADC, and more, enabling flexible integration with sensors and external devices. Designed for low power consumption, it includes multiple power-saving modes, making it suitable for battery-powered applications. Typical Applications Smart home and IoT devices Wireless sensors and control systems Industrial automation Smart lighting and energy management Matter-compatible devices (via Thread support)

The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic XIAO form factor. Measuring just 21x17.5mm, it features 19 multifunction GPIOs, an RGB LED, and a Battery Management System with ultra-low power consumption of 27μA, battery power supply, and direct battery voltage measurement. Thanks to the XIAO ecosystem, the XIAO RP2350 is compatible with a wide range of add-ons, including displays, LED matrix, Grove modules, CAN Bus, Vision AI sensors, and mmWave sensors. With native support for MicroPython, C, and C++, the XIAO RP2350 is perfect for developers of all levels looking to create compact, battery-powered applications for smart control, wearables, DIY keyboards, and more.

IC RF TxRx Only Bluetooth, WiFi Bluetooth v5.0, Thread, Zigbee® 2.412GHz ~ 2.484GHz 32-VFQFN Exposed Pad The ESP32-C6FH4 is a low-power, highly integrated wireless microcontroller from Espressif Systems, designed for IoT applications. It is based on a 32-bit RISC-V processor running at up to 160 MHz, providing efficient performance for embedded systems while maintaining low power consumption. This variant includes 4 MB of embedded flash memory, making it suitable for standalone applications without the need for external flash. The ESP32-C6FH4 supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band (backward compatible with Wi-Fi 4/802.11 b/g/n) Bluetooth Low Energy (BLE 5) IEEE 802.15.4 (used for protocols like Thread and Zigbee) Key features include: Rich set of GPIO pins with support for peripherals such as UART, SPI, I2C, PWM, ADC, and more Integrated hardware security features (secure boot, flash encryption, cryptographic accelerators) Multiple low-power modes for battery-operated devices On-chip temperature sensor and RTC peripherals #commonpartslibrary #transceiver

CH32V003 is an industrial-grade microcontroller with a 48MHz main frequency, low power consumption, small size, and built-in DMA controllers, ADC, timers, and communication interfaces. #RISC-V #IoT #MCU

IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.4, Matter, Thread, Zigbee® 47-XFBGA, WLCSP # NRF54L15-CAAA-R7 ## General Description The NRF54L15-CAAA-R7 is an ultra-low-power wireless System-on-Chip (SoC) developed by [Nordic Semiconductor](https://www.nordicsemi.com?utm_source=chatgpt.com) for advanced Internet of Things (IoT), industrial, medical, smart home, and wireless sensing applications. The device integrates a high-performance Arm Cortex-M33 processor, a dedicated RISC-V coprocessor, large embedded memory resources, and a multiprotocol 2.4 GHz radio subsystem into a compact package. It is designed to provide exceptional energy efficiency, robust wireless connectivity, and enhanced security while supporting modern wireless standards including Bluetooth® Low Energy, Matter, Thread, Zigbee®, Bluetooth Mesh, Amazon Sidewalk, and proprietary 2.4 GHz protocols. The device is optimized for battery-powered applications requiring extended operating life, high processing capability, and scalable connectivity solutions. ## Key Features ### Processing Architecture * 128 MHz Arm® Cortex®-M33 application processor * Integrated 128 MHz RISC-V coprocessor * TrustZone® security architecture ### Memory Resources * 1.5 MB Non-Volatile Memory (NVM) * 256 KB RAM ### Wireless Connectivity * Multiprotocol 2.4 GHz RF transceiver * Bluetooth® Low Energy support * Matter support * Thread support * Zigbee® support * Bluetooth Mesh support * Amazon Sidewalk support * Proprietary 2.4 GHz protocol support * Bluetooth Channel Sounding capability * Compatible with Wi-Fi companion devices ### RF Performance * Data rates up to 4 Mbps * Output power up to +8 dBm * High receiver sensitivity for extended wireless range ### Security Features * Hardware cryptographic engine * Side-channel attack protection * Tamper detection mechanisms * Secure boot and secure firmware update support ### Peripheral Interfaces * SPI * I²C (TWI) * UART * I²S * GPIO * ADC * PWM * PDM * NFC * QDEC ### Power Characteristics * Ultra-low-power operation * Optimized sleep modes * Battery-powered application support * Operating supply voltage from 1.7 V to 3.6 V ### Package Information * WLCSP package * Surface-mount technology * Industrial operating temperature support ## Applications * Smart Home Devices * Industrial IoT Systems * Wearable Electronics * Medical and Healthcare Devices * Asset Tracking Solutions * Wireless Sensors * Building Automation Systems * Smart Lighting Controls * Consumer Electronics * Connected Peripheral Devices #NordicSemiconductor #nRF54L15 #NRF54L15CAAAR7 #BluetoothLE #Matter #Thread #Zigbee #IoT #WirelessSoC #EmbeddedSystems #IndustrialIoT #SmartHome #LowPowerDesign #CortexM33 #RISCV

CH32V003 is an industrial-grade microcontroller with a 48MHz main frequency, low power consumption, and built-in peripherals like DMA controllers, ADC, and timers. It operates at 3.3V or 5V and can handle temperatures from -40℃ to 85℃. #RISC-V #IoT #MCU

Forked from SeeedStudio. Then imported the official SMD footprint from the [seeed getting started page](https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/) Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios. #SeeedStudio #xiao

CH32V003 is an industrial-grade microcontroller with a 48MHz main frequency, low power consumption, and built-in peripherals like DMA controllers, ADC, and timers. It operates at 3.3V or 5V and can handle temperatures from -40℃ to 85℃. #RISC-V #IoT #MCU

CH32V003 is an industrial-grade microcontroller with a 48MHz main frequency, low power consumption, and built-in peripherals like DMA controllers, ADC, and timers. It operates at 3.3V or 5V and can handle temperatures from -40℃ to 85℃. #RISC-V #IoT #MCU

Samacsys Import 400KB 22 3V~3.6V RISC-V 160MHz QFN-32-EP(5x5) Microcontroller Units (MCUs/MPUs/SOCs) ROHS QFN50P500X500X90-33N-D https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf Ultra-Low-Power SoC with RISC-V Single-Core CPU 0.9 Espressif Systems ESP32-C3 356-ESP32-C3 https://www.mouser.co.uk/ProductDetail/Espressif-Systems/ESP32-C3?qs=iLbezkQI%252BsiMXe7tMG%252Bo%2FA%3D%3D #IoT #WiFi #Bluetooth #esp32 #riscv #part

RISC-V QFN28X4 Microcontrollers (MCU/MPU/SOC) ROHS #CommonPartsLibrary #Microcontroller

The CH32V203 is an industrial-grade enhanced low-power general-purpose MCU based on 32-bit RISC-V core. RISC-V WCH MCU TSSOP*4.4x6.5mm*P0.65mm*

2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 module. Built around ESP8684 series of SoC, RISC-V single-core microprocessor 2 MB/4 MB flash in chip package #ESP32 #WiFi #RISC-V

ESP32-C3-MINI-1 ESP32-C 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board ESP32-C3-DevKitM-1 is a compact entry-level development board from Espressif Systems based on the ESP32-C3-MINI-1 module. It integrates a 32-bit RISC-V single-core microcontroller, 2.4 GHz Wi-Fi, and Bluetooth Low Energy (BLE) connectivity, making it suitable for IoT devices, embedded applications, smart sensors, and wireless control projects. The board exposes most GPIO pins through headers for easy prototyping and supports programming through USB. Key Features: 32-bit RISC-V Single-Core Processor Based on ESP32-C3 SoC architecture Clock frequency up to 160 MHz Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy (BLE) support Memory 4 MB embedded Flash memory inside the ESP32-C3-MINI-1 module GPIO and Peripheral Interfaces Multiple programmable GPIO pins Supports interfaces such as: SPI UART I²C I²S PWM ADC USB Serial/JTAG Development Board Features Built-in ESP32-C3-MINI-1 module with PCB antenna USB interface for programming and power 5 V to 3.3 V onboard voltage regulator Breadboard-friendly pin headers Applications IoT gateways Smart home devices Wireless sensors Industrial automation Wearable electronics Embedded control systems #ESP32C3 #ESP32 #DevKitM1 #Espressif #RISCVD #WiFiMCU #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessModule #SmartDevices #ElectronicsDesign #Prototyping

Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity's. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.

64-bit RISCV SoC, BGA-484 #CommonPartsLibrary #IntegratedCircuit #Microcontroller

Milk-V Duo is an ultra-compact embedded development platform based on the CV1800B chip. It can run Linux and RTOS, providing a reliable, low-cost, and high-performance platform for professionals, industrial ODMs, AIoT enthusiasts, DIY hobbyists, and creators. #RISC-V #IoT #ODMs #milkv #part

802.11 b/g/n Wi­Fi and Bluetooth 5 module, ESP32­C3 SoC, RISC­V microprocessor, On-board antenna esp32 espressif WiFi Bluetooth LE ESP32?C3*WROOM?02*

RISC-V MCU, 8KB OTP Program Memory, 8KB ROM, 16KB Instruction Cache, 16KB SRAM, 320MHz, 1.8 and 3.6V, 24 GPIO, QFN-48 #CommonPartsLibrary #IntegratedCircuit #Microcontroller