MAX98357A Series 5.5V 3.2W PCM Input Class D Audio Power Amplifier - TQFN-16 The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range. ● Single-Supply Operation (2.5V to 5.5V) ● 3.2W Output Power into 4Ω at 5V ● 2.4mA Quiescent Current ● 92% Efficiency (RL = 8Ω, POUT = 1W) ● 22.8μVRMS Output Noise (AV = 15dB) ● Low 0.013% THD+N at 1kHz ● No MCLK Required ● Sample Rates of 8kHz to 96kHz ● Supports Left, Right, or (Left/2 + Right/2) Output ● Sophisticated Edge Rate Control Enables Filterless Class D Outputs ● 77dB PSRR at 1kHz ● Low RF Susceptibility Rejects TDMA Noise from GSM Radios ● Extensive Click-and-Pop Reduction Circuitry ● Robust Short-Circuit and Thermal Protection ● Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN ● Solution Size with Single Bypass Capacitor is 4.32mm2 Applications ● Single Li-ion Cell/5V Devices ● Smart Speakers ● Notebook Computers ● IoT Devices ● Gaming Devices (Audio and Haptics) ● Smartphones ● Tablets ● Cameras #commonpartslibrary #integratedcircuit #linearamplifier #mono

3.20mm ID, 9.00mm OD (RCA) Phono (RCA) Jack Mono Connector Solder #commonpartslibrary #connector #jackconnector

3.50mm (0.141", 1/8", Mini Plug) - Headphone Phone Jack Mono Connector Solder with Tip Switch, Surface Mount, Right Angle #AudioJack2_Ground_Switch

6.35mm (0.250", 1/4") - Headphone Phone Jack Mono Connector Solder #commonpartslibrary #headphone #jack #mono #connector

Low Power Mono Audio CODEC

3.20mm ID, 9.00mm OD (RCA) Phono (RCA) Jack Mono Connector Solder #CommonPartsLibrary #Connector #Barrel-Connectors #Audio-Connectors #RCJ

Amplifier IC 2-Channel (Stereo) Class D 28-HTSSOP TPA3110D2PWP ay isang high-efficiency Class-D stereo audio power amplifier IC na dinisenyo para sa consumer audio applications tulad ng speakers, televisions, at portable audio systems. Kaya nitong mag-deliver ng hanggang 15 W per channel sa stereo mode o 30 W mono sa bridge configuration habang mababa ang power loss dahil sa efficient Class-D architecture. Key Features 15 W/ch stereo output into 8 Ω load at 16 V supply 30 W mono output into 4 Ω load (BTL mode) High efficiency (~90%) kaya madalas hindi na kailangan ng malaking heatsink Wide operating voltage: 8 V to 26 V Filter-free operation para mabawasan ang external components Integrated SpeakerGuard™ protection Adjustable power limiter DC speaker protection Built-in: Short-circuit protection Thermal shutdown with auto recovery Overcurrent protection Differential audio inputs para mas magandang noise immunity Four selectable gain settings EMI suppression technology para mas madaling pumasa sa EMC requirements Available sa 28-pin HTSSOP (PWP) package na may exposed thermal pad Typical Applications LCD/LED televisions Bluetooth speakers Consumer audio amplifiers DIY stereo amplifier boards Powered speakers Home audio systems #commonpartslibrary #integratedcircuit #linearamplifier #audioamplifier