The INMP441 is a high-performance, low power, digital-output, omnidirectional MEMS microphone with a bottom port.

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 1.5kHz 14-CLCC (6x6) General Description The ADXL355BEZ is a low noise, low drift, low power, three-axis MEMS accelerometer intended for high-precision sensing applications. It delivers high-resolution digital acceleration data with excellent long-term stability and minimal temperature-induced variation. The device integrates a complete sensing chain, including the MEMS sensor element, analog conditioning, analog-to-digital conversion, and digital filtering. Output data is provided through SPI or I²C interfaces, enabling straightforward integration into embedded and industrial systems. Key Features Three-axis acceleration sensing (X, Y, Z) Selectable full-scale ranges: ±2 g, ±4 g, ±8 g Low noise density (~25 µg/√Hz) Low offset and minimal temperature drift High-resolution 20-bit digital output Integrated digital filtering SPI and I²C communication interfaces Low power consumption (~200 µA typical) Wide supply voltage range (2.25 V to 3.6 V) Integrated temperature sensor Hermetically sealed package Applications Structural health monitoring Vibration measurement and analysis Tilt and inclination sensing Industrial condition monitoring Navigation and inertial systems Seismic detection Robotics and stabilization platforms Functional Description The ADXL355BEZ includes an integrated sensing and processing architecture composed of: Three-axis MEMS sensing element Analog front-end signal conditioning High-resolution ADC Digital filtering and decimation stages Temperature sensing element Digital communication interface (SPI/I²C) Configuration and control registers Electrical Characteristics (Typical) Supply voltage: 2.25 V to 3.6 V Supply current: ~200 µA Output data rate: up to 4 kHz Noise density: ~25 µg/√Hz Resolution: 20-bit Interface: SPI / I²C Mechanical and Package Information Package type: LGA (Land Grid Array) Approximate dimensions: 3 mm × 5 mm × 1 mm Hermetically sealed for improved environmental robustness Interface and Communication Supports SPI (4-wire) and I²C protocols Outputs 20-bit acceleration data per axis Data format: two’s complement Measurement Ranges ±2 g ±4 g ±8 g Environmental Specifications Operating temperature range: -40°C to +125°C Storage temperature range: -55°C to +150°C Power Management Supports measurement and standby modes Designed for low-power operation in continuous sensing applications Compliance and Reliability Industrial-grade device Designed for long-term stability RoHS compliant #commonpartslibrary #sensor #accelerometer

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) 9-LGA The BMP585 is a high-precision digital barometric pressure sensor designed for accurate altitude and environmental pressure measurement in compact, low-power embedded systems. It integrates a MEMS sensing element with advanced signal conditioning and digital compensation circuitry to provide highly stable and reliable pressure and temperature data across a wide operating range. The device is optimized for portable electronics, industrial sensing, indoor navigation, weather monitoring, drones, and IoT applications requiring precise atmospheric measurements. The sensor supports digital communication through standard serial interfaces, enabling straightforward integration with modern microcontrollers and processors. Its low noise performance, high resolution, and fast response characteristics make it suitable for applications involving motion tracking, vertical positioning, and environmental monitoring. The compact surface-mount package allows efficient PCB layout integration in space-constrained designs. The BMP585 incorporates configurable sampling, filtering, and power management features to balance measurement accuracy, bandwidth, and energy consumption. Internal calibration and compensation algorithms reduce system-level complexity while improving long-term stability and measurement consistency. The device is designed for robust operation under varying environmental conditions and supports low-power modes for battery-operated systems. Engineering Specification Device Type Digital barometric pressure and temperature sensor Sensor Functions Atmospheric pressure sensing Temperature sensing Altitude estimation support Pressure Measurement High-resolution MEMS pressure sensing element Integrated digital compensation and calibration Low-noise pressure measurement architecture Temperature Measurement Integrated temperature sensing for environmental monitoring and pressure compensation Communication Interface I²C interface support SPI interface support Power Features Low-power operation Configurable performance and sampling modes Sleep and standby operating capability Signal Processing Integrated digital filtering Configurable oversampling Internal compensation engine Package Information Compact surface-mount package RoHS-compliant construction Operating Characteristics High measurement stability Fast response time Designed for portable and industrial environments Application Areas Wearable devices Indoor navigation systems Portable weather stations Industrial monitoring IoT sensing nodes Drones and altitude tracking systems Consumer electronics #commonpartslibrary #integratedcircuit #pressuresensor

Analog Microphone Electret Condenser Omnidirectional (-38dB ±3dB) PC Pins #CommonPartsLibrary #Audio #MEMS #Microphone

Accelerometer X, Y, Z Axis ±400g 160Hz ~ 2.56kHz 16-LGA (3x3.25) The ADXL373BCCZ-RL7 is an ultralow power, high-g digital MEMS accelerometer developed by Analog Devices for motion sensing and impact detection applications. The device is optimized for battery-powered and always-on systems requiring continuous acceleration monitoring with minimal power consumption. It supports selectable measurement ranges suitable for shock, vibration, and activity monitoring in industrial, wearable, medical, asset tracking, and IoT applications. The accelerometer integrates embedded motion detection features, a FIFO buffer, and interrupt capabilities to reduce host processor workload and overall system power consumption. Engineering Specification Device Type Ultralow power 3-axis digital MEMS accelerometer Manufacturer Analog Devices Inc. Manufacturer Part Number ADXL373BCCZ-RL7 Measurement Axes Three-axis acceleration sensing Acceleration Range Selectable full-scale ranges supporting high-g measurements up to ±400 g Output Interface SPI digital serial communication interface Resolution High-resolution digital acceleration output with integrated filtering and signal conditioning Power Supply Requirement Operates from a low-voltage DC supply suitable for portable and embedded systems Power Consumption Designed for extremely low current operation during measurement and wake-up monitoring modes Embedded Features Integrated activity detection Motion and impact sensing FIFO data buffering Interrupt generation Wake-up detection functionality Sampling and Performance Programmable output data rates and filtering options for optimized noise and bandwidth performance Operating Temperature Range Industrial temperature range suitable for harsh environmental applications Package Type LGA surface-mount package Mounting Style Surface mount technology Application Areas Impact event recording Condition monitoring Asset tracking Industrial sensing Wearable electronics Portable instrumentation Shock and vibration monitoring Always-on motion detection systems #commonpartslibrary #integratedcircuit #accelerometer #sensor

30 Hz ~ 10 kHz Digital, PDM Microphone MEMS (Silicon) Omnidirectional (-26dB ±1dB @ 94dB SPL) Solder Pads #commonpartslibrary #audio #microphone

10 MHz XO (Standard) LVCMOS Oscillator 3.3V Standby (Power Down) 4-SMD, No Lead #commonpartslibrary #MEMS #oscillator

20 Hz ~ 20 kHz Digital, PDM Microphone MEMS (Silicon) 1.62 V ~ 3.6 V Omnidirectional (-36dB ±1dB @ 94dB SPL) Solder Pads #commonpartslibrary #sensor #audiosensor #integratedcircuit

20 Hz ~ 10 kHz Analog Microphone MEMS (Silicon) 1.5 V ~ 3.6 V Omnidirectional (-38dB ±1dB) Solder Pads Microphone, Electret Condenser Microphone (ECM) for audio signal capture with an omnidirectional pickup pattern and analog output. The CMM-2718AT-3817NC-TR features a 27 mm × 18 mm × 9.7 mm package, operating voltage of 1.5 V to 10 V, sensitivity of -38 ±3 dB, and frequency response of 100 Hz to 10 kHz. #Microphone #ElectretCondenserMicrophone #AudioComponent #ECM #PCBComponent

6-axis MEMS gyroscope/accelerometer, I2C/I3C/SPI interface, 1.71 to 3.3V, LGA-14 IMU 6-Axis *LGA*3x2.5mm*P0.5mm*

20 Hz ~ 20 kHz Digital, PDM Microphone MEMS (Silicon) 1.62 V ~ 3.6 V Omnidirectional (-36dB ±1dB @ 94dB SPL) Solder Pads #CommonPartsLibrary #Audio #MEMS #Microphone

Digital, PDM Microphone MEMS (Silicon) Omnidirectional (-37dB ±1dB @ 94dB SPL) Solder Pads #CommonPartsLibrary #Audio #MEMS #Microphone

20 Hz ~ 19 kHz Digital, PDM Microphone MEMS (Silicon) 1.62 V ~ 3.6 V Omnidirectional (-36dB ±1dB @ 94dB SPL) Solder Pads #commonpartslibrary #microphone #audio

20 Hz ~ 20 kHz Digital, PDM Microphone MEMS (Silicon) 1.62 V ~ 3.6 V Omnidirectional (-36dB ±1dB @ 94dB SPL) Solder Pads The IM69D130V01XTSA1 is a high-performance digital MEMS microphone designed for applications requiring compact size, low power consumption, and reliable acoustic performance. The device integrates a MEMS sensing element with signal conditioning and digital output functionality within a surface-mount package suitable for automated assembly processes. The component is intended for use in voice-enabled systems, consumer electronics, industrial equipment, communication devices, and embedded audio applications where consistent sensitivity, low noise operation, and environmental robustness are required. The microphone supports digital audio interfacing and is optimized for far-field voice capture and speech recognition environments. The device construction is designed to provide stable operation under standard environmental and mechanical conditions. It is compatible with modern PCB manufacturing processes and supports integration into space-constrained electronic assemblies. Electrical and acoustic characteristics are engineered to maintain reliable performance across varying operating conditions. The component complies with standard electronic manufacturing and handling requirements for moisture sensitivity, electrostatic discharge protection, and reflow soldering compatibility. Proper PCB layout, grounding practices, and acoustic port alignment are recommended to achieve optimal system-level performance. #CommonPartsLibrary #Audio #MEMS #Microphone

20 Hz ~ 20 kHz Digital, PDM Microphone MEMS (Silicon) 1.6 V ~ 3.6 V Omnidirectional (-26dB ±1dB @ 94dB SPL) Solder Pads #CommonPartsLibrary #Audio #MEMS #Microphone