Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A SOT-23-6 Thin, TSOT-23-6 The AP63200/AP63201/AP63203/AP63205 is a 2A, synchronous buck converter with a wide input voltage range of 3.8V to 32V and fully integrates a 125mΩ high-side power MOSFET and a 68mΩ low-side power MOSFET to provide high-efficiency step-down DC/DC conversion. The AP63200/AP63201/AP63203/AP63205 device is easily used by minimizing the external component count due to its adoption of peak current mode control along with its integrated compensation network. The AP63200/AP63201/AP63203/AP63205 has optimized designs for Electromagnetic Interference (EMI) reduction. The converter features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time. It also has a proprietary gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on and turn-off times, which further erases highfrequency radiated EMI noise caused by MOSFET switching. The device is available in a low-profile, TSOT26 package. • VIN 3.8V to 32V • 2A Continuous Output Current • 0.8V ±1% Reference Voltage • 22µA Ultralow Quiescent Current • Switching Frequency o 500kHz: AP63200 and AP63201 o 1.1MHz: AP63203 and AP63205 • Pulse Width Modulation (PWM) Regardless of Output Load o AP63201 • Supports Pulse Frequency Modulation (PFM) o AP63200, AP63203, and AP63205 o Up to 80% Efficiency at 1mA Light Load o Up to 88% Efficiency at 5mA Light Load • Fixed Output Voltage o 3.3V: AP63203 o 5.0V: AP63205 • Proprietary Gate Driver Design for Best EMI Reduction • Frequency Spread Spectrum (FSS) to Reduce EMI • Precision Enable Threshold to Adjust UVLO • Protection Circuitry o Overvoltage Protection o Cycle-by-Cycle Peak Current Limit o Thermal Shutdown • 12V and 24V distributed power bus supplies • Flat screen TV sets and monitors • Power tools and laser printers • White goods and small home appliances • FPGA, DSP, and ASIC supplies • Home audios • Network systems • Set top boxes • Gaming consoles • Consumer electronics #commonpartslibrary #integratedcircuit #AP63203WU7 #BuckConverter #DCDCConverter #PowerManagement #VoltageRegulator #SynchronousBuck #EmbeddedSystems #IndustrialElectronics #PowerSupply #DiodesInc #3V3Power #ElectronicsDesign

Laser Diode 520nm 20mW 6.1V 78mA TO-56-3 Lens Top Metal Can #commonpartslibrary #laserdiode

Diode: laser; 645-660nm; 7mW; 9/28; TO18; Mounting: THT; 2.2÷2.5VDC #commonpartslibrary #laserdiode

Laser Driver IC 4.25Gbps 1 Channel 3V ~ 3.6V 24-LFCSP-VQ (4x4) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Laser-Driver #ADN2871

The PAT9125EL-TKIT from PixArt Imaging Inc. is a low-power optical tracking miniature chip designed for precise motion detection using laser-based optical navigation technology. It integrates both the optical sensor and VCSEL laser light source into a single compact package, enabling accurate tracking even on smooth or glossy surfaces. This device captures sequential surface images and processes them internally to determine movement direction, speed, and displacement (X/Y data), which can be accessed by a host controller via digital interfaces. It is particularly suited for space-constrained, battery-powered, and enclosed systems, eliminating the need for mechanical components like code wheels or special surface markings. Key Features Integrated optical sensor + VCSEL laser (850 nm) in a single package No external lens required, simplifying design Wide depth of field (DOF): 1–30 mm, even on reflective surfaces Programmable resolution up to ~1275 CPI Supports I²C (TKIT) interface (SPI variant available as TKMT) Motion detection interrupt output Built-in oscillator (no external clock needed) Low power consumption: Run: ~0.7 mA Sleep: down to 10 µA Power-down: ~5 µA Pre-calibrated laser (no calibration required) IEC/EN 60825-1 Class 1 eye-safe laser compliant Key Specifications Supply Voltage: VDD: 1.7–3.6 V VLD (laser): 2.7–3.6 V Max Tracking Speed: up to ~30 inches/sec Package: 8-pin LGA (3.5 × 3.2 × 1.0 mm) Interface: I²C (for TKIT variant)

Pulsed Laser Diode in Plastic Package 25W Peak Power opto laserdiode LED*5.0mm*

VL53L1X laser ranging flight time sensor 400 cm distance measurement #pinheader #tht

Blue Laser Diode 450nm 80mW 7V 125mA Radial Can-3 Lead

Pulsed Laser Diode 905nm 90W 8-11V 40A Radial Can

Laser Drivers ADN2830ACPZ32 LFCSP-32_L5.0-W5.0-P0.50-TL-EP3.1 LCSC Part Number: C514345 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

Laser Drivers ADN2526ACPZ LFCSP-16_L3.0-W3.0-P0.50-BL-EP1.7 LCSC Part Number: C1523804 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/LINEAR(凌特)

Optical Navigation Sensors Laser Stream Sensor #Sensor

Laser Drivers ONET1151LRGER VQFN-24_L4.0-W4.0-P0.50-BL-EP2.5 LCSC Part Number: C779400 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Laser Diode 905nm 90W 8 ~ 11V 40A Radial, Can (5.7mm) #CommonPartsLibrary #Optoelectronics #Laser-Diode

Laser Drivers ONET1141LRGET VQFN-24_L4.0-W4.0-P0.50-TL-EP2.5 LCSC Part Number: C2868689 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Laser Drivers MAX3949ETE+T QFN-16_L3.0-W3.0-P0.50-TL-EP1.1 LCSC Part Number: C2988285 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/MAXIM(美信)

The VL6180X, a product from STMicroelectronics, is a cutting-edge optical module that integrates proximity sensing, ambient light sensing (ALS), and a VCSEL (Vertical Cavity Surface Emitting Laser) light source into a single, compact package. This module leverages ST's patented FlightSense technology to deliver fast, accurate distance ranging capabilities, measuring absolute range up to and beyond 10 cm, independent of the object's reflectance. Designed for easy integration into a wide range of applications, from smartphones and portable devices to industrial and domestic appliances, the VL6180X offers features such as gesture recognition, high dynamic range ambient light sensing, and cross-talk compensation for cover glass. It supports various operating modes, including single-shot and continuous measurements, with control and data retrieval facilitated through an I2C interface. The module's low power operation, combined with its ability to perform ranging and ALS measurements automatically at predefined intervals, makes it a versatile solution for developers looking to incorporate reliable proximity detection and light level measurement into their projects.