Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-223-5 Linear Voltage Regulator (LDO) providing a fixed 3.3 V output with up to 500 mA output current from an input voltage range of 2.3 V to 6.0 V. It features low dropout voltage, stable operation with ceramic output capacitors, current limiting, short-circuit protection, and overtemperature protection, making it suitable for low-voltage power regulation applications. #LDO #LinearVoltageRegulator #FixedOutput #3V3 #500mA #LowDropout #PowerManagement #Microchip

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower

Pololu D24V22F5 is a compact 5 V fixed-output step-down voltage regulator module with a 5.3–36 V input range and up to 2.5 A typical output current. Keywords: D24V22F5, 5V buck regulator, 2.5A step-down module, 36V input regulator, Pololu power module Pololu

The AMS1117-3.3RG is a fixed-output, low-dropout (LDO) linear voltage regulator that provides a regulated 3.3 V output from a higher input voltage. It is capable of delivering up to 1 A output current and is commonly used in microcontroller, communication, and embedded-system power supplies where a stable 3.3 V rail is required. The device includes built-in protection features such as current limiting and thermal shutdown for improved reliability. Key Features Fixed 3.3 V output voltage Supports up to 1 A output current Low dropout voltage, typically around 1.2 V and up to 1.3 V at 1 A load Input voltage capability up to 12 V (some manufacturer variants specify higher absolute maximum ratings) Good line and load regulation Built-in current limiting protection Built-in thermal shutdown protection Available in SOT-223 surface-mount package Suitable for post-regulation of switching power supplies and general 3.3 V power conversion applications Typical Applications ESP32, STM32, and other microcontroller-based systems Embedded and IoT devices Communication modules LCD monitors and display circuits Battery-powered equipment Post-regulation for DC/DC converters Motherboards and expansion cards #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

Linear Voltage Regulators (LDO) TLV75518PDBVR SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR LCSC Part Number: C2877863 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TLV755P low-dropout linear voltage regulator, 500mA output current, 1.45V to 5.5V input voltage range, fixed output voltage options from 0.6V to 5V, low 25µA typical quiescent current, 238mV max dropout at 500mA, 1% output accuracy, 46dB PSRR at 100kHz, stable with 1µF ceramic output capacitor, built-in soft-start, foldback current limit, active output discharge, thermal shutdown and undervoltage lockout protection, available in SOT-23-5, X2SON-4 and WSON-6 packages. Search Keywords: TLV755P, Texas Instruments TLV755P, TI TLV755P, TLV755P LDO, TLV755P regulator, TLV755P 500mA, TLV755P low dropout regulator, TLV755P low Iq, TLV755P 1.45V to 5.5V, TLV755P fixed output regulator, TLV755P SOT-23-5, TLV755P DBV, TLV755P DYD, TLV755P DQN, TLV755P DRV, TLV755P WSON-6, TLV755P X2SON-4, TLV755P datasheet Hashtags: #TLV755P #TexasInstrumentsTLV755P #TILDO #LDORegulator #LowDropoutRegulator #500mALDO #LowIqLDO #FixedOutputLDO #TLV755PDBV #TLV755PDYD #TLV755PDQN #TLV755PDRV #SOT235 #X2SON4 #WSON6 #ActiveOutputDischarge #FoldbackCurrentLimit #ThermalShutdown