fiber trans

Fiber Optic Transmitter 660nm 2.02V 80 mA Versatile Link #CommonPartsLibrary #Connector #Optoelectronic #Fiber-Optic-Transmitter #HFBR-1521

5.7 kV RMS/1.5 kV RMS, Quad-Channel LVDS 2.5 Gigabit Isolator (0 Reverse Channels) LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 28-BSSOP (0.295", 7.50mm Width) The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #ADN4624BRNZ #DigitalIsolator #LVDS #AnalogDevices #HighSpeedInterface #GalvanicIsolation #LVDSIsolator #DigitalIsolation #IndustrialElectronics #HighSpeedData #SERDES #SignalIntegrity #EmbeddedSystems #ElectronicsDesign #InterfaceICs

Fiber Optic Transmitter 820nm 1.7V 100 mA ST #CommonPartsLibrary #Optoelectronics #Connector #Fiber-Optic #HFBR-1412

Fiber Optic Transmitter 820nm 1.7V 100 mA ST #CommonPartsLibrary #Connector #Fiber-optic

Fiber Optic Transmitter 645nm 2V 30 mA Connector-less #CommonPartsLibrary #Optoelectronic #Fiber-Optic #Transmitters - Discrete #IF-E96

Fiber Optic Transmitters, Receivers, Transceivers Low Cost 5MBd ST FO Rx-Pb Free #Optoelectronic Fiber Optic Receivers

Fiber Optic/Laser Sensors QSE113 LED-TH_L4.5-W2.6-P2.54-RD LCSC Part Number: C898419 JLCPCB Part Class: undefined Manufactured by onsemi(安森美)

Fiber Optical Transceivers HFBR-1537Z OPTO-TH_AVAGO_HFBR-X531ETZ LCSC Part Number: C692077 JLCPCB Part Class: undefined Manufactured by AVAGO(安华高)

Fiber Optical Transceivers AFBR-2419TZ OPTO-TH_AVAGO_AFBR-2418TZ LCSC Part Number: C691983 undefined Manufactured by AVAGO(安华高)

Fiber Optical Transceivers AFBR-2419MZ OPTO-TH_AVAGO_AFBR-2419MZ LCSC Part Number: C691982 undefined Manufactured by AVAGO(安华高)

Fiber Optical Transceivers HFBR-2522ETZ OPTO-TH_AVAGO_HFBR-X521ETZ LCSC Part Number: C692082 JLCPCB Part Class: undefined Manufactured by AVAGO(安华高)

Fiber Optical Transceivers HFBR-1522ETZ OPTO-TH_AVAGO_HFBR-X521ETZ LCSC Part Number: C692073 JLCPCB Part Class: undefined Manufactured by AVAGO(安华高)

LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 32-WFQFN Exposed Pad, CSP The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #Isolator #ADN4624BCPZ #AnalogDevices #LVDS #DigitalIsolator #GalvanicIsolation #HighSpeedCommunication #SERDES

Fiber Optic Receiver Optical 3V ~ 5.5V The PLR237/T10BK specification defines the engineering requirements for an electronic indicator component intended for visual status indication in electrical and electronic systems. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure reliable operation throughout the product lifecycle. It serves as the governing technical document for design verification, manufacturing, inspection, and system integration. The component is designed to provide consistent visual indication of system status, operating conditions, or user interface functions. It shall deliver dependable performance under specified operating conditions while maintaining compatibility with standard electronic assembly processes and applicable industry standards. Engineering Requirements The component shall be manufactured using approved materials and qualified production processes to ensure consistent electrical performance, mechanical durability, and long-term reliability. All dimensions, package characteristics, and construction details shall conform to the latest approved engineering documentation. Electrical performance shall remain within specified operating limits, providing stable illumination characteristics, low power consumption, and reliable functionality throughout the intended operating temperature and environmental ranges. The component shall be compatible with standard surface-mount or through-hole assembly processes, as applicable to the product configuration. Workmanship shall be free from defects including cracks, contamination, package damage, corrosion, or manufacturing irregularities that could impair functionality, appearance, or service life. Inspection and testing shall be conducted using calibrated equipment and validated procedures to verify compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require documented engineering evaluation, formal approval, and implementation through the established engineering change control process. Documentation Supporting documentation shall include engineering drawings, electrical specifications, material declarations, inspection reports, qualification records, manufacturing instructions, and revision-controlled technical documentation. All records shall be maintained in accordance with the organization's configuration management and quality assurance procedures. Revision Control Revisions to this specification shall be managed through the formal engineering change process. All proposed changes shall undergo technical review, validation, and approval to ensure continued compliance with design intent, manufacturing requirements, and applicable industry standards. #EngineeringSpecification #ElectronicComponents #IndicatorDevice #ElectricalEngineering #ProductDevelopment #QualityAssurance #Manufacturing #EngineeringDocumentation #Compliance

Fiber Optic Transmitter 950nm 1.5V 50 mA Connector-less #CommonPartsLibrary #Optoelectronics #Fiber Optic Transmitter #IF-E91

Fiber Optic/Laser Sensors MICROFC-60035-SMT-TR OPTO-SMD_MICROFC-60035-SM LCSC Part Number: C603293 JLCPCB Part Class: Extended Part Manufactured by onsemi(安森美)

Multipurpose Optical Fiber Connection Fiber Optical Transceivers ROHS HFBR-1521Z CONN-TH_HFBR-1521Z LCSC Part Number: C188712 JLCPCB Part Class: Extended Part Manufactured by Broadcom/AVAGO(安华高)

Multipurpose Optical Fiber Connection Plugin Fiber Optical Transceivers ROHS HFBR-2521Z COMM-TH_HFBR_2521ETZ LCSC Part Number: C188716 JLCPCB Part Class: Extended Part Manufactured by Broadcom/AVAGO(安华高)

Fiber Optical Transceivers HFBR-2523Z COMM-TH_HFBR_2521ETZ LCSC Part Number: C188718 JLCPCB Part Class: Extended Part Manufactured by Broadcom/AVAGO(安华高)

Fiber Optic/Laser Sensors QSB363ZR OPTO-TH_QSB363ZR LCSC Part Number: C464111 JLCPCB Part Class: Extended Part Manufactured by onsemi(安森美)

Fiber Optic/Laser Sensors TEKT5400S OPTO-TH_TEKT5400S LCSC Part Number: C139563 JLCPCB Part Class: Extended Part Manufactured by VISHAY(威世)

Fiber Optical Transceivers HFBR-1414Z COMM-TH_HFBR-1414TZ LCSC Part Number: C188711 JLCPCB Part Class: Extended Part Manufactured by Broadcom/AVAGO(安华高)

Fiber Optical Transceivers HFBR-1528Z COMM-TH_HFBR-1528Z LCSC Part Number: C188714 JLCPCB Part Class: Extended Part Manufactured by Broadcom/AVAGO(安华高)

Fiber Optical Transceivers AFBR-2529Z COMM-TH_AFBR-2529Z LCSC Part Number: C188683 JLCPCB Part Class: Extended Part Manufactured by Broadcom/AVAGO(安华高)