4-Bit Arithmetic Logic Unit DIP-24 #CommonPartsLibrary #IntegratedCircuit #Logic

24 Bit Analog to Digital Converter 3, 5 Input 1 Sigma-Delta 24-PDIP AD7714 DIP-24 The AD7714 is a complete analog front end for low-frequency measurement applications. The device accepts low level signals directly from a transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an onchip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time. The part features three differential analog inputs (which can also be configured as five pseudo-differential analog inputs) as well as a differential reference input. It operates from a single supply (+3␣ V or +5␣ V). The AD7714 thus performs all signal conditioning and conversion for a system consisting of up to five channels Charge Balancing ADC 24 Bits No Missing Codes 0.0015% Nonlinearity Five-Channel Programmable Gain Front End Gains from 1 to 128 Can Be Configured as Three Fully Differential Inputs or Five Pseudo-Differential Inputs Three-Wire Serial Interface SPI™, QSPI™, MICROWIRE™ and DSP Compatible 3 V (AD7714-3) or 5 V (AD7714-5) Operation Low Noise (<150 nV rms) Low Current (350␣ mA typ) with Power-Down (5 mA typ) AD7714Y Grade: +2.7 V to 3.3 V or +4.75 V to +5.25 V Operation 0.0010% Linearity Error –408C to +1058C Temperature Range Schmitt Trigger on SCLK and DIN Low Current (226␣ mA typ) with Power-Down (4 mA typ) Lower Power Dissipation than Standard AD7714 Available in 24-Lead TSSOP Package Low-Pass Filter with Programmable Filter Cutoffs Ability to Read/Write Calibration Coefficients APPLICATIONS Portable Industrial Instruments Portable Weigh Scales Loop-Powered Systems Pressure Transducers #CommonPartsLibrary #IntegratedCircuit #AD7714

5V low-power CMOS SRAM memory, organized as 2K x 8 bits, with 90 ns access time, TTL-compatible inputs/outputs, asynchronous static operation, standby low-power mode, and battery backup support. DIP-24 package. Keywords / Hashtags: 6116LA90DB, 6116LA-90DB, 6116 SRAM, 2Kx8 SRAM, 16Kbit SRAM, STK 6116 / 6116 SRAM DIP-24, CMOS SRAM, low power SRAM, 5V SRAM, asynchronous SRAM, DIP-24 SRAM, Renesas SRAM, #6116LA90DB #6116SRAM #CMOSSRAM #2Kx8SRAM #16KbitSRAM #LowPowerSRAM #5VSRAM #DIP24 #RenesasThe 6116 5V CMOS SRAM is organized as 2K x 8. The 6116 offers a reduced power standby mode.The low-power (LA) version also offers a battery backup data retention capability where the circuit typically consumes only 1uW to 4uW operating off a 2V battery. All inputs and outputs are TTL-compatible. Fully static asynchronous circuitry is used, requiring no clocks or refreshing for operation. Military grade product is available.

Power Relays DIP24-2A72-21L RELAY-TH_STANDEXMEDER_DIPXX-XA72-XX LCSC Part Number: C1561372 undefined Manufactured by STANDEXMEDER(斯丹麦德)

Power Relays DIP24-1C90-51D RELAY-TH_STANDEXMEDER_DIPXX-XC90-XX LCSC Part Number: C1524854 JLCPCB Part Class: undefined Manufactured by STANDEXMEDER(斯丹麦德)

Power Relays DIP24-2A72-21D RELAY-TH_STANDEXMEDER_DIP05-1C90-51D LCSC Part Number: C1524806 JLCPCB Part Class: Extended Part Manufactured by STANDEXMEDER(斯丹麦德)