2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2.5/ 2-G-5.08 CAN connector terminal block 2 pin The component is a two-position pluggable terminal block header designed for secure and reliable wire-to-board connections in industrial and embedded electronic systems. It is part of the COMBICON MSTB family, widely used for field wiring applications such as CAN bus, RS485, and power distribution. The device provides a robust interface between PCB circuitry and external wiring, supporting easy installation, maintenance, and replacement through a pluggable connection system. Mechanical Characteristics Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole PCB mount Orientation: Vertical (straight) Termination Style: Pin header for mating plug connector Housing Material: Polyamide (PA), high-temperature resistant Color: Green Electrical Characteristics Rated Voltage: Up to 250 V Rated Current: Up to 12 A Contact Material: Copper alloy Contact Plating: Tin plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94 V-0 Mating and Compatibility Compatible Plug Series: Phoenix Contact MSTB 2,5 series (e.g., 1757019) Connection Method (Plug Side): Screw clamp termination Wire Size Range: Typically accepts 24 AWG to 12 AWG (depending on mating plug) Standards and Compliance RoHS: Compliant UL Recognized: Yes IEC Compliance: Yes Application Notes The component is commonly used in industrial communication systems such as CAN bus networks where a reliable and removable connection is required for CANH and CANL signals. Its 5.08 mm pitch ensures adequate spacing for signal integrity and ease of wiring, while the pluggable design simplifies field servicing and module replacement. #connector #tht #terminalblock

JST XH Connector Header Through Hole 2 position 0.098" (2.50mm) B2B-XH-A(LF)(SN) is a 2-position, 2.50 mm pitch, through-hole shrouded male PCB header from the JST XH Series. It is designed for reliable wire-to-board connections in consumer electronics, industrial equipment, power supplies, battery packs, and embedded systems. The connector features a polarized shrouded housing to prevent incorrect mating and supports secure, dependable electrical connections with easy PCB assembly. Key Features: 2-position wire-to-board header 2.50 mm contact pitch Through-hole (THT) PCB mounting Straight vertical orientation Shrouded housing with polarization to prevent misalignment Rated for up to 3 A current and 250 V AC/DC Tin-plated brass contacts for reliable conductivity Operating temperature range: -25°C to +85°C Compatible with JST XH Series crimp housings and terminals Ideal for power and signal connections in compact electronic assemblies. #JST #XHSeries #PCBHeader #WireToBoard #Connector #ThroughHole #THT #ShroudedHeader #2Position #25mmPitch #Electronics #EmbeddedSystems #IndustrialElectronics #PowerConnector #PCBDesign

JST PH SMD Connector Header Surface Mount, Right Angle 2 position 0.079" (2.00mm) The S2B-PH-SM4-TB(LF)(SN) is a surface-mount, 2-position wire-to-board header connector from the JST PH series. It is designed for compact and reliable connections in low-current, signal, and power applications. With a 2.0 mm pitch and secure friction-lock mechanism, this connector ensures stable mating with corresponding PH series crimp housings. The connector features side-entry (horizontal) orientation and solder tabs for enhanced PCB retention, making it suitable for automated assembly and high-vibration environments. Key Features 2-position connector (2 circuits) 2.0 mm pitch spacing Surface-mount, right-angle (side entry) configuration Friction-lock mechanism for secure mating Solder hold-down tabs for mechanical stability Compact, low-profile design Compatible with JST PH series housings and terminals Tape & reel packaging for automated assembly Mechanical Characteristics Mounting Type: Surface Mount (SMT) Orientation: Right Angle (Side Entry) Pitch: 2.0 mm Number of Positions: 2 Mating Type: Friction lock Board Retention: Solder tabs (SM4 type) Electrical Characteristics Rated Current: 2 A (per contact, AWG #24) Rated Voltage: 100 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 100 MΩ Withstanding Voltage: 800 VAC/minute Material Specifications Insulator: Polyamide (Nylon), UL94V-0 rated Contact Material: Copper alloy Contact Plating: Tin over nickel (Sn plating) Environmental Specifications Operating Temperature Range: -25°C to +85°C Storage Temperature: -40°C to +85°C Packaging Information Packaging Type: Tape & Reel (TB suffix) Lead-Free: Yes (LF) Surface Finish: Tin plating (SN) Compatible Components Mating Housing: JST PH series (e.g., PHR-2) Crimp Terminals: SPH-002T-P0.5S or equivalent Typical Applications Consumer electronics Battery connections Signal and low-power connections Embedded systems and IoT devices Portable and compact electronic assemblies #commonpartslibrary #connector #header #tht

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole The USB4105-GF-A is a USB Type-C receptacle connector designed for USB 2.0 applications, commonly used in embedded systems, IoT devices, and consumer electronics. It features a 24-position (16 active + 8 dummy) contact design that supports reversible plug orientation, making it user-friendly and compliant with USB Type-C standards. This connector is a right-angle, surface-mount (SMT) device with through-hole retention tabs, providing both compact PCB integration and strong mechanical stability. Key Features USB Type-C Interface Reversible plug orientation (no wrong insertion) Standard USB Type-C receptacle Supports USB 2.0 signaling Contact Configuration 24 pins total (16 active + 8 dummy pins) Includes: Power (VBUS) Ground (GND) USB 2.0 data (D+, D−) Configuration channel (CC) Electrical Capability Supports multiple current levels (up to 5A depending on design) Rated voltage up to 48V DC Mechanical Design Right-angle (horizontal) mounting Surface-mount + through-hole hybrid Includes: Board guide Solder retention tabs (strong anchoring) Durability & Materials Shielded metal shell (EMI protection) Contact finish: Gold plating Housing: UL94 V-0 flame rated Mating cycles: ~20,000 insertions Environmental Specs Operating temperature: -40°C to +85°C RoHS compliant (lead-free) Typical Applications Microcontroller boards (ESP32, Arduino, etc.) Charging + data interface for embedded devices Power + USB communication ports Consumer electronics (gadgets, accessories) #CommonPartsLibrary #Connector #USB #DVI #USB4105 #USB-C

PCB terminal block; pitch 3.5mm; 2-ways; oblique entry; range wire 0.2-2.5mm2 (AWG 26-16) The DG250-3.5-02P-11-00A(H) is a 2-position PCB terminal block connector designed for secure wire-to-board connections. It uses a spring clamp (push-in) mechanism, allowing easy wire insertion and reliable electrical contact without screws. This connector is commonly used in: Power input terminals Signal wiring interfaces Industrial and embedded PCB applications It features a 3.5 mm pitch and a 45° angled entry, making it suitable for compact PCB layouts where space and cable routing are critical. Key Features Electrical Characteristics Rated Voltage: up to 400V Rated Current: up to 5A Mechanical & Connection Number of Pins: 2 (1×2 configuration) Pitch: 3.5 mm Mounting Type: Through-hole (THT) Wire Connection: Spring clamp / push button type No screwdriver required Wire Size: ~22–16 AWG (0.2–1.5 mm²) Physical Design Orientation: 45° angled (easier cable routing) Compact size: suitable for dense PCB layouts Body Material: Polyamide (PA66) Flammability Rating: UL94V-0 (fire-resistant) Contact & Reliability Contact Material: Phosphor bronze Plating: Tin-plated (good conductivity + corrosion resistance) Operating Temperature: −40 °C to +105 °C #commonpartslibrary #connector #terminalblock #tht

Tactile Switch SPST-NO Top Actuated Through Hole tactile switch 6x6 through hole The B3F-1000 is a compact, through-hole mounted tactile switch designed for momentary input applications. It features a standard 6.0 mm square footprint and is widely used in consumer and industrial electronics for reliable user interface control. Mechanical Characteristics Dimensions (L × W × H): 6.0 mm × 6.0 mm × 3.4 mm Actuator Type: Round Actuator Height: 4.3 mm Mounting Style: Through Hole Mounting Direction: Straight Termination Style: Solder Pin Color: White Electrical Characteristics Switch Function: SPST, Momentary (OFF-(ON)) Contact Rating: 50 mA @ 24 VDC Operating Force: 1 N (~100 gf) Contact Resistance: ≤100 mΩ (typical, refer to datasheet) Insulation Resistance: ≥100 MΩ (typical, refer to datasheet) Environmental Characteristics Operating Temperature Range: -25°C to +70°C RoHS Compliance: Yes Reliability Operating Life: 1,000,000 cycles Packaging Information Factory Pack Quantity: 1500 pcs Unit Weight: 0.008818 oz (~0.25 g) Additional Information Country of Origin: Japan (JP) Illumination: Non-illuminated Ground Terminal: No #commonpartslibrary #switch #tactile #spst

Slide Switch SPST 4A 125V Throuh Hole The L101011MS02Q is a single-pole, single-throw (SPST) miniature toggle switch designed for low-power switching applications. It features a compact panel-mount design with a durable actuator and reliable contact mechanism, making it suitable for control and signal switching in industrial, instrumentation, and consumer electronics. The switch provides a maintained (latching) ON-OFF function and is built for long mechanical and electrical life. Key Features SPST (Single Pole, Single Throw) configuration ON-OFF maintained switching function Miniature toggle actuator Panel mount design with threaded bushing Solder lug terminals for secure wiring High mechanical durability Compact form factor Mechanical Characteristics Mounting Type: Panel mount Actuator Type: Toggle lever Bushing Type: Threaded, with nut and washer Terminal Type: Solder lug Number of Poles: 1 Number of Throws: 1 Switching Function: ON-OFF (latching) Electrical Characteristics Rated Voltage: 125 VAC / 28 VDC Rated Current: 3 A @ 125 VAC, 6 A @ 28 VDC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Strength: 1,000 VAC for 1 minute Material Specifications Housing: Thermoplastic or phenolic (manufacturer dependent) Actuator: Metal (nickel-plated brass) Contacts: Copper alloy with silver plating Terminals: Brass, tin-plated Environmental Specifications Operating Temperature Range: -30°C to +85°C Storage Temperature: -40°C to +85°C Mechanical Life Mechanical Life: ≥ 40,000 cycles Electrical Life: ≥ 10,000 cycles (at rated load) Typical Applications Control panels Power switching for small devices Instrumentation equipment Audio equipment Industrial and consumer electronics #commonpartslibrary #rocker #switch #spst

Connector Header Through Hole 4 position 0.100" (2.54mm) UART header 1x4 2.54mm Single-row, through-hole male pin header with 4 positions and 2.54 mm pitch. Designed for board-to-wire or board-to-board interconnect applications such as UART interfaces. Mechanical Specifications Number of Positions: 4 Number of Rows: 1 Pitch: 2.54 mm (0.100") Mounting Style: Through Hole Mounting Angle: Straight (Vertical) Contact Gender: Male (Pin) Termination Type: Solder Pin Housing Material: Polybutylene Terephthalate (PBT) Housing Color: Black Electrical Specifications Current Rating: 4.3 A – 6.3 A (per pin, depending on conditions) Voltage Rating: 450 VAC – 550 VAC Contact Resistance: (Typical for series, not specified exact) Insulation Resistance: (Not specified) Material & Plating Contact Material: Phosphor Bronze Contact Plating: Gold Flammability Rating: UL94 V-0 Environmental & Compliance RoHS Compliance: Yes Country of Origin: USA Packaging Packaging Type: Bulk Factory Pack Quantity: 1 Series Information Series: TSW (Samtec Pin Strip Header Series) Product Type: Headers & Wire Housings Typical Applications UART / Serial communication headers Microcontroller programming interfaces General-purpose 2.54 mm interconnects Prototyping and development boards #commonpartslibrary #connector

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole USB Type-C receptacle 16 pin USB2.0 The USB4215-03-A is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a 16-pin configuration supporting reversible plug orientation with standard USB 2.0 differential data lines and configuration channel (CC) pins. The connector is intended for surface-mount PCB assembly with through-hole shell stakes for enhanced mechanical strength. It is widely used in compact embedded systems for power delivery, charging interfaces, and basic data communication. Key Features USB Type-C receptacle (USB 2.0 compliant) 16 functional pins (no SuperSpeed support) Reversible plug orientation Surface-mount contacts with through-hole shell tabs Compact, low-profile design High insertion cycle durability Suitable for automated assembly Electrical Characteristics Rated Current: VBUS: up to 5.0 A (depending on PCB design and cable) Signal pins: 0.25 A max Rated Voltage: 20 V DC max Contact Resistance: ≤ 40 mΩ Insulation Resistance: ≥ 100 MΩ Dielectric Withstanding Voltage: 100 V AC Mechanical Characteristics Mounting Type: Surface Mount (SMT) with Through-Hole Shield Tabs Number of Positions: 16 Mating Cycles: 10,000 cycles (typical) Insertion Force: 5–20 N Extraction Force: 8–20 N Material Specifications Contacts: Copper Alloy Contact Plating: Gold over Nickel Housing: High-temperature thermoplastic (UL94V-0) Shell: Stainless Steel Environmental Characteristics Operating Temperature Range: -25°C to +85°C Storage Temperature Range: -40°C to +85°C RoHS Compliant: Yes Halogen Free: Yes Pin Configuration (USB 2.0 Type-C) VBUS (Power) GND (Ground) D+ / D− (USB 2.0 differential pair) CC1 / CC2 (Configuration channel) SBU pins (optional/unused in USB 2.0 designs) Applications USB power input (5 V / USB-C PD trigger designs) Embedded systems and development boards Consumer electronics Charging interfaces Low-speed USB communication devices Packaging Tape & Reel for automated pick-and-place assembly Compliance & Standards USB Type-C Specification (USB 2.0 interface) RoHS / REACH compliant UL recognized materials #CommonPartsLibrary #Connector #USB-C

Connector Header Through Hole 6 position 0.100" (2.54mm) The 640456-6 is a 6-position, single-row wire-to-board header connector from TE Connectivity (AMP series), designed for reliable power and signal connections in a wide range of electronic applications. It features a 2.54 mm pitch and through-hole mounting for strong mechanical retention and ease of assembly. The connector is commonly used with matching crimp housings and terminals, providing a secure and serviceable interconnect solution for PCB-based systems. Key Features 6-position (1x6) header connector 2.54 mm pitch spacing Through-hole mounting (THT) Vertical (top-entry) orientation Friction-lock compatible with mating housings Tin-plated contacts for good conductivity and corrosion resistance Durable thermoplastic housing Mechanical Characteristics Mounting Type: Through Hole Orientation: Vertical (Top Entry) Pitch: 2.54 mm Number of Positions: 6 Row Configuration: Single row Mating Type: Friction fit with compatible housing Termination Type: Solder tails Electrical Characteristics Rated Current: Up to 3 A per contact (depending on wire gauge) Rated Voltage: 250 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Withstanding Voltage: 1,000 VAC Material Specifications Housing: Thermoplastic, UL94V-0 rated Contacts: Copper alloy Contact Plating: Tin over nickel Environmental Specifications Operating Temperature Range: -40°C to +105°C Storage Temperature: -40°C to +105°C Packaging Information Packaging Type: Bulk or tray (varies by supplier) RoHS Compliant: Yes Lead-Free: Yes Compatible Components Mating Housing: TE Connectivity compatible crimp housings (e.g., AMP series) Crimp Terminals: соответствующие crimp contacts for 2.54 mm systems Typical Applications PCB interconnects Consumer electronics Industrial control systems Power and signal distribution Prototyping and development boards #CommonPartsLibrary #Connector #Header #Male-pins #MTA-100

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole, USB Type-C receptacle 16 pin power only The UJ20-C-H-G-SMT-2-P16-TR is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a right-angle, surface-mount (SMT) configuration with additional through-hole retention tabs for improved mechanical strength on the PCB. This connector supports reversible USB-C plug insertion, making it suitable for modern embedded systems, consumer electronics, and charging/data interfaces. It is optimized for compact designs while maintaining reliable electrical and mechanical performance. Key Features Electrical Characteristics USB Standard: USB 2.0 (up to 480 Mbps data rate) Rated Current: up to 5 A (VBUS) Rated Voltage: 48 VDC max Mechanical / Physical Connector Type: USB Type-C receptacle Mounting: Surface Mount (SMT) + through-hole stakes Orientation: Right-angle (horizontal) Number of Contacts: 24 positions (16 active + 8 dummy) Contact Plating: Gold (≈3 µin) for durability Mating Cycles: ~10,000 insertions Materials & Build Shielding: Fully shielded (metal shell, SUS304) Insulator Material: UL94 V-0 rated (flame-retardant) Operating Temperature: -25°C to +85°C Packaging: Tape & Reel (TR) for automated assembly Series: UJ20 (Same Sky / former CUI Devices) Typical Applications Embedded systems (e.g., MCU/SoC boards) Power + data interface for IoT devices Consumer electronics (chargers, hubs, accessories) Development boards and custom PCB designs Quick Insight (Design Tip) Even though it’s a USB-C connector, this specific part is USB 2.0 only—so: No SuperSpeed (TX/RX) lines Only VBUS, GND, CC1/CC2, D+ / D- are typically used #CommonPartsLibrary #Connector #USB

JST PH Connector Header Through Hole 3 position 0.079" (2.00mm) The B3B-PH-K-S(LF)(SN) is a 3-position, 2.0 mm pitch, through-hole (THT) male header from the JST PH series, designed for wire-to-board connections. It is a top-entry, shrouded connector that mates with JST PH crimp housings, commonly used for compact internal wiring in electronic devices such as consumer electronics, battery connections, and embedded systems. This connector is optimized for high-density PCB layouts, offering a reliable and secure connection with a locking mechanism and low contact resistance. Key Features Mechanical 3 positions (3-pin) 2.0 mm pitch (compact spacing) Through-hole mounting (THT) Top-entry / vertical orientation Shrouded header (prevents misalignment) Detent lock / friction lock for secure mating Electrical Rated current: up to 2A per pin Rated voltage: up to 100V AC/DC Low contact resistance (~10 mΩ max initial) High insulation resistance (≥1000 MΩ) Environmental Operating temperature: -25°C to +85°C Design & Reliability Fully shrouded design → protects pins and ensures proper insertion Reliable contact structure with dimpled contacts for stable connection PCB retention mechanism → improves mechanical stability Tin-plated contacts for good conductivity and solderability Application Use Commonly used for: Battery connectors Sensor modules Embedded systems (e.g., microcontroller boards) Consumer electronics internal wiring Power + signal low-current connections #commonpartslibrary #connector #header #tht

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole screw terminal 2 pin 3.5mm This component is a printed circuit board mounted screw terminal block designed to provide a secure and serviceable wire-to-board connection. It accommodates two conductors and uses a screw clamp mechanism to ensure reliable electrical and mechanical contact. The compact 3.5 mm pitch makes it suitable for space-constrained designs while maintaining adequate creepage and clearance distances for low-voltage applications. The terminal is intended for through-hole mounting and supports field wiring without the need for specialized tools, making it appropriate for industrial control systems, power distribution modules, and general-purpose electronic assemblies. Mechanical Characteristics: The terminal block is constructed with a high-temperature thermoplastic housing that provides mechanical strength and electrical insulation. The housing is typically green in color and designed for side-entry wire insertion. The clamping system uses metal screws and pressure plates to secure stripped wire ends. The component is designed for through-hole PCB mounting with soldered pins providing structural stability. The form factor supports modular placement along the PCB edge for accessible wiring. Electrical Characteristics: The device is designed for low to moderate voltage and current applications typical of signal and power connections in control electronics. Conductive elements are made from metal alloys with appropriate plating to ensure good conductivity and resistance to corrosion. The screw clamp connection provides stable contact resistance under vibration and thermal cycling conditions. Material and Environmental Characteristics: The insulating body is made from flame-retardant thermoplastic material compliant with relevant safety standards. The component is suitable for standard operating temperature ranges encountered in industrial and commercial electronics. Materials are selected to meet common environmental and regulatory requirements such as RoHS compliance. Application Considerations: This terminal block is intended for applications requiring reliable field wiring connections, ease of maintenance, and secure termination. It is commonly used in power supplies, control panels, interface modules, and embedded systems. Proper PCB footprint design and adherence to recommended soldering practices are required to ensure optimal performance and reliability. #CommonPartsLibrary #Connector #Terminal-Block #WR-TBL Series 1377

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

Fuse Holder 32V 1 Circuit Blade Through Hole The 178.6764.0001 is an automotive blade fuse holder from Littelfuse, part of the MINI® FL1 series, designed for direct PCB mounting (through-hole). It allows easy integration of a single MINI blade fuse into a printed circuit board for overcurrent protection. This component is commonly used in automotive electronics, industrial control systems, and embedded power circuits, where compact and reliable fuse protection is required. Key Features Fuse Type Compatibility Supports MINI® automotive blade fuses (ATM/APM type) PCB Mount (Through-Hole) Designed for direct soldering to PCB for strong mechanical support Current Capability Up to 30 A maximum ~22 A continuous rating Voltage Rating Up to 58 VDC (automotive systems) Single Fuse Position Holds 1 fuse per holder Thermoplastic Housing Heat-resistant black body UL94 V-0 flammability rating for safety Contact Material Tin-plated copper alloy terminals for reliable conductivity Standard PCB Pitch Approx. 7.62 mm pin spacing Modular Design Multiple holders can be mounted side-by-side for multi-channel protection blade fuse holder automotive PCB #Circuit-Protection #Fuseholders #FL1

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) pin header 1x03 2.54mm Component Type: Pin Header Product Category: Headers & Wire Housings Series: WR-PHD Brand: Würth Elektronik Electrical Specifications Voltage Rating: 250 V Current Rating: 3 A Insulation Resistance: 1 GΩ Mechanical Specifications Number of Positions: 3 Number of Rows: 1 Pitch: 2.54 mm (0.1 in) Mounting Style: Through Hole Mounting Orientation: Right Angle Termination Type: Solder Pin Contact Type: Male Pin Mating Post Length: 6 mm (0.236 in) Termination Post Length: 3 mm (0.118 in) Material Specifications Contact Material: Copper Alloy Contact Plating: Gold Housing Material: Polyamide (PA) Housing Color: Black Environmental Specifications Operating Temperature (Min): -40 °C Operating Temperature (Max): +105 °C Flammability Rating: UL 94 V-0 Application Application Type: Board-to-Board Packaging & Miscellaneous Packaging: Bulk Factory Pack Quantity: 1000 Country of Origin: Taiwan Unit Weight: 0.006702 oz pin header 1x3 2.54mm #commonpartslibrary #connector

10 (8 + 2) Position Card Connector Secure Digital - microSD™ Surface Mount, Right Angle Gold microSD socket push push The DM3AT-SF-PEJM5 is a low-profile, surface-mount microSD card connector from Hirose Electric featuring a push-push insertion and ejection mechanism. Designed for compact and portable electronic devices, it supports standard microSD, microSDHC, and microSDXC cards. The connector provides reliable electrical contact through gold-plated copper alloy terminals and is rated for up to 10,000 insertion/removal cycles, ensuring long-term durability. With a right-angle SMT configuration, integrated card detection switch, and robust mechanical retention, this connector is well-suited for applications such as embedded systems, IoT devices, consumer electronics, and industrial equipment where space efficiency and dependable card interfacing are critical. Product Category: Memory Card Connectors Product Type: Card Connector Subcategory: Memory Connectors & Sockets Card Type: microSD Number of Contacts: 8 Number of Rows: 1 Pitch: 1.1 mm Mounting Type: PCB Mount Mounting Style: Standard Orientation: Right Angle Termination Style: SMD/SMT Insertion / Extraction Style: Push-Push Mating Cycles: 10,000 Current Rating: 500 mA Voltage Rating: 125 VAC Contact Material: Copper Contact Plating: Gold Housing Material: Liquid Crystal Polymer (LCP) Insulation Resistance: 1 GΩ Height: 1.68 mm Length: 13.85 mm Operating Temperature Range: -25°C to +85°C Color: Black Packaging Options: Reel, Cut Tape, MouseReel Factory Pack Quantity: 1500 RoHS Compliance: Yes Country of Origin: China Country of Assembly: China Country of Diffusion: China Unit Weight: 0.003527 oz #commonpartslibrary #connector #memory #cardsocket #microsd

JST PH Connector Header Through Hole, Right Angle 4 position 0.079" (2.00mm) The S4B-PH-K-S(LF)(SN) is a 4-position, single-row, right-angle (side-entry) male header designed for 2.0 mm pitch wire-to-board connections. It is a through-hole mounted, shrouded connector that ensures reliable and secure mating with compatible PH series housings and crimp terminals. This connector is commonly used in consumer electronics, embedded systems, power supplies, and industrial control boards, especially where space-saving and dependable connections are required. Key Features Connector Type: Shrouded male header (wire-to-board) Number of Positions: 4 pins (single row) Pitch: 2.0 mm Orientation: Right-angle (side entry) Mounting Type: Through-hole (THT) Termination: Solder Electrical Characteristics Rated Voltage: 100 V Rated Current: 2 A per contact Insulation Resistance: ≥1000 MΩ Contact Resistance: Low (typically ≤10–20 mΩ) Mechanical & Material Contact Material: Brass / phosphor bronze with tin plating Housing Material: PA66 (Nylon), UL94 V-0 flame rated Locking Mechanism: Detent lock for secure mating Shrouded Design: Prevents misalignment and protects pins Environmental Operating Temperature: −25 °C to +85 °C #CommonPartsLibrary #Connector #Header #JSTPH #MalePins #RightAngle #4pos

Slide Switch, SPDT, On-On, Through Hole, OS Series, 100mA # OS102011MS2QN1 ## General Description The OS102011MS2QN1 is a miniature slide switch manufactured by C&K, designed for low-power signal switching and control applications in electronic equipment. The switch features a compact mechanical design, reliable contact performance, and through-hole mounting configuration, making it suitable for embedded systems, industrial controls, instrumentation, telecommunications equipment, consumer electronics, and portable devices. Its robust construction ensures dependable operation throughout repeated switching cycles while maintaining stable electrical performance. The device is commonly utilized for mode selection, power control, configuration settings, and user-interface functions within electronic assemblies. ## Key Features ### Mechanical Characteristics * Miniature slide switch construction * Through-hole PCB mounting * Compact form factor * Durable actuator mechanism * Positive switching action * Designed for repeated mechanical operation ### Switching Characteristics * Maintained-contact operation * Reliable position retention * Low-force actuation * Stable contact engagement * Suitable for signal and control switching applications ### Electrical Characteristics * Low contact resistance * Reliable signal transmission * Stable switching performance * Suitable for low-current and low-voltage circuits * Consistent electrical operation throughout service life ### Contact System * High-reliability contact materials * Corrosion-resistant contact surfaces * Long operational durability * Dependable electrical continuity ### Material Construction * High-strength thermoplastic housing * Industrial-grade metallic contacts * Durable actuator assembly * RoHS-compliant materials ### Environmental Characteristics * Suitable for commercial and industrial electronic equipment * Resistant to mechanical wear * Reliable performance under normal operating environments * Designed for long-term service reliability ### Application Areas * Embedded Systems * Industrial Control Equipment * Consumer Electronics * Test and Measurement Instruments * Communication Devices * Medical Electronics * Power Control Circuits * User Interface Controls * Configuration and Mode Selection Functions * Electronic Development Platforms ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Switching Component ## Manufacturer C&K ## Product Family OS Series Miniature Slide Switches #OS102011MS2QN1 #CKSwitches #SlideSwitch #MiniatureSwitch #ElectronicSwitch #PCBSwitch #EmbeddedSystems #IndustrialElectronics #ControlSystems #ConsumerElectronics #HardwareDesign #ElectronicsEngineering #SignalSwitching #PCBAssembly #ElectronicComponents #commonpartslibrary #switch #slide #spdt

Connector Header Through Hole 2 position 0.100" (2.54mm) Component Type: Pin Header Product Category: Headers & Wire Housings Series: WR-PHD Brand: Würth Elektronik Electrical Specifications Voltage Rating: 250 V Current Rating: 3 A Insulation Resistance: 1 GΩ Mechanical Specifications Number of Positions: 2 Number of Rows: 1 Pitch: 2.54 mm (0.1 in) Mounting Style: Through Hole Mounting Orientation: Straight Termination Type: Solder Pin Contact Type: Male Pin Mating Post Length: 6 mm (0.236 in) Termination Post Length: 3 mm (0.118 in) Latching Type: Unlatched Material Specifications Contact Material: Copper Alloy Contact Plating: Gold Housing Material: Polybutylene Terephthalate (PBT) Housing Color: Black Environmental Specifications Operating Temperature (Min): -40 °C Operating Temperature (Max): +105 °C Flammability Rating: UL 94 V-0 Application Application Type: Board-to-Board Packaging & Miscellaneous Packaging: Bulk Factory Pack Quantity: 1000 Country of Origin: Taiwan Unit Weight: 0.003880 oz #commonpartslibrary #connector #header

Connector Header Through Hole 6 position 0.100" Pin Header 1x06 2.54mm PinHeader 1x6 2.54mm The TSW-106-07-G-S is a through-hole vertical header designed for board-to-board and board-to-wire interconnection in electronic systems. It is part of a precision connector series known for high reliability, consistent mechanical alignment, and excellent electrical performance. The component is commonly used in applications requiring modular connectivity, prototyping flexibility, and secure signal routing between printed circuit boards or peripheral interfaces. Its design supports repeated mating cycles while maintaining stable contact integrity, making it suitable for both development and production environments. Functional Description This component functions as a single-row header that provides a direct electrical interface between a printed circuit board and a mating connector or cable assembly. It enables straightforward signal or power routing through plated pins that are soldered into the PCB. The vertical orientation allows perpendicular mating, supporting compact and efficient board layouts. The connector is designed to ensure proper alignment and retention during mating, reducing the risk of intermittent connections. Electrical Characteristics The header supports low-voltage signal transmission and moderate current levels typical of board-level interconnects. It offers low contact resistance to maintain signal integrity and efficient current flow. The contact system is designed to provide consistent electrical performance across repeated insertions, ensuring reliability in both signal and power applications. Mechanical Characteristics The component features a robust insulating housing that maintains pin alignment and structural integrity during handling and operation. The contact pins are fabricated from conductive material and plated to enhance durability, conductivity, and مقاومت to corrosion. The through-hole mounting style provides strong mechanical anchoring to the printed circuit board, improving resistance to mechanical stress and vibration. The design supports reliable mating with compatible connectors and ensures long service life. Environmental Characteristics The TSW-106-07-G-S is constructed using materials that provide stable performance under typical environmental conditions encountered in electronic assemblies. It is designed to withstand standard temperature ranges and environmental stresses such as humidity and mechanical handling, maintaining electrical and mechanical reliability over time. Applications This header is widely used in embedded systems, industrial electronics, development platforms, communication equipment, and general-purpose PCB interconnect applications. It is especially suited for designs requiring modular connectivity, easy assembly, and dependable signal transfer. Summary The TSW-106-07-G-S from Samtec is a reliable through-hole header solution that combines mechanical durability with stable electrical performance. Its straightforward design, compatibility with standard interconnect systems, and suitability for a wide range of applications make it a common choice for board-level connectivity in modern electronic designs. #CommonPartsLibrary #Connector #Header #TSW

3 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2,5/ 3-G-5.08 #connector #tht #terminalblock

2 Position Board Side/Socket - Closed 5.08mm Pitch Right-Angle Pin The WJ2EDGRC-5.08-02P-14-00A is a 2-position pluggable terminal block (screw-type connector) with a 5.08 mm pitch, commonly used for PCB power and signal connections. It is part of the EDGRC series designed for reliable wire-to-board connectivity in industrial, automation, and power electronics applications. It allows secure cable termination using screw clamps and is designed for easy plug-in/out mating with a corresponding header on a PCB. Key Features Type: Pluggable terminal block (female plug) Pin count: 2 positions Pitch: 5.08 mm Connection method: Screw clamp / rising cage clamp Mounting style: Through-hole (mates with PCB header) Wire termination: Suitable for solid and stranded wires High reliability contact design for stable electrical connection Detachable plug-in design for easy maintenance and replacement High current capability (typical for 5.08 mm pitch terminal blocks) Industrial-grade insulation material for durability and safety Wide usage: Power supply input, motor control, industrial I/O, and general PCB wiring #CommonPartsLibrary #Connector #Terminal block

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole The 1730405 is a PCB terminal block from Phoenix Contact, belonging to the MKDS 2,5 series. It is designed for secure screw-type wire-to-board connections, commonly used in industrial control systems, power distribution, and PCB interface applications. This component provides a reliable mechanical and electrical connection between wires and printed circuit boards (PCB) with a standard 5.08 mm pitch. Key Features 3-position PCB terminal block Compact single-row configuration for signal or power connections Screw connection technology Secure and vibration-resistant wire termination Standard 5.08 mm pitch Compatible with common industrial PCB layouts Rated electrical performance Nominal voltage up to 400 V Nominal current up to 24 A (with proper conductor size) Wire compatibility Solid and stranded wires: 0.14 mm² to 2.5 mm² AWG range: approximately 30–12 AWG High insulation rating Insulating material: PA (Polyamide) Flame class: UL 94 V-0 High surge voltage capability Up to 4 kV surge rating Through-hole PCB mounting Designed for soldering into PCB for stable mechanical retention Industrial-grade durability Suitable for harsh environments and long-term use Typical Applications Industrial automation systems Power supply and distribution boards Control panels Embedded PCB wiring interfaces Electrical instrumentation systems 1x3 terminal block #CommonPartsLibrary #Connector #Terminal block